Control Systems
Lect.7 Steady State Error
Basil Hamed
Chapter Learning Outcomes
Basil Hamed
2
7.1 Introduction
In Chapter 1, we saw that control systems analysis and design focus on three specifications:
Now we are ready to examine steady-state errors. We define the errors and derive methods of controlling them.
Basil Hamed
3
Definition and Test Inputs
Basil Hamed
4
Application to Stable Systems
Basil Hamed
5
SS Error for Unit Step Input
Basil Hamed
6
7.2 Steady-State Error for Unity�Feedback Systems
Steady-state error can be calculated from a system's closed-loop transfer function, T(s), or the open-loop transfer function, G(s), for unity feedback systems.
Steady-State Error in Terms of T(s)
Basil Hamed
7
Example 7.1 P 345
Basil Hamed
8
Since T(s) is stable and, subsequently, E(s) does not have right-half-plane poles or jw poles other than at the origin, we can apply the final value theorem
Steady-State Error in Terms of G(s)
Basil Hamed
9
E(s)= R(s)- C(s); C(s) =G(s) E(s)
We now apply the final value theorem
Test Signals
The three test signals we use to establish specifications for a control system's steady-state error characteristics are :
Let us take each input and evaluate its effect on the steady-state error by using Eq.
Basil Hamed
10
Test Signals
Using Eq. With R(s) = 1/s, we find
Basil Hamed
11
Step Input
Test Signals
Basil Hamed
12
Example 7.2 P. 347
Basil Hamed
13
Example 7.2 P. 347
Basil Hamed
14
Example 7.3 P 348
Basil Hamed
15
Example 7.3 P 348
Basil Hamed
16
7.3 Static Error Constants and�System Type
We continue our focus on unity negative feedback systems and define parameters that we can use as steady-state error performance specifications. These steady-state error performance specifications are called static error constants.
Basil Hamed
17
Static Error Constants
For a step input, u(t),
Basil Hamed
18
For Ramp input, tu(t),
Static Error Constants
Basil Hamed
19
Example 7.4 P 350
PROBLEM: For each system in the Figure below , evaluate the static error constants and find the expected error for the standard step, ramp, and parabolic inputs.
Basil Hamed
20
Example 7.4 P 350
SOLUTION: First verify that all closed-loop systems shown are indeed stable.
a)
Basil Hamed
21
Example 7.4 P 350
b)
Basil Hamed
22
Example 7.4 P 350
C)
Basil Hamed
23
System Type
The values of the static error constants,, depend upon the form of G(s), especially the number of pure integrations in the forward path. Since steady-state errors are dependent upon the number of integrations in the forward path.
we define system type to be the value of n in the denominator or, equivalently, the number of pure integrations in the forward path.
Basil Hamed
24
Therefore, a system with n = 0 is a Type 0 system. If n = 1 or n = 2, the corresponding system is a Type 1 or Type 2 system, respectively.
Example
Basil Hamed
25
Type 1
Type 2
Type 3
Relationships between input and system type
Basil Hamed
26
Type | Step Input | Ramp Input | Parabola Input |
0 | | | |
1 | 0 | | |
2 | 0 | 0 | |
3 | 0 | 0 | 0 |
Example
Basil Hamed
27
Solution: The system is stable and of type 2
Zero SS error for step and ramp input
For parabolic input
-11.6063
-0.1968 + 0.6261i
-0.1968 - 0.6261i
The closed loop
poles are
7.4 Steady-State Error Specifications
Static error constants can be used to specify the steady-state error characteristics of control systems. Just as damping ratio, ζ, settling time, Ts, peak time, Tp, and percent overshoot, % OS, are used as specifications for a control system's transient response, so the position constant, Kp, velocity constant, Kv, and acceleration constant, Ka, can be used as specifications for a control system's steady-state errors.
Basil Hamed
28
For example, if a control system has the specification Kv = 1000, we can draw several conclusions:
1. The system is stable
2. The system is of Type 1
3. A ramp input is the test signal.
Example 7.5 P. 354
PROBLEM: What information is contained in the specification Kp = 1000?
Basil Hamed
29
SOLUTION: The system is stable. The system is Type 0, since only a Type 0 system has a finite Kp. Type 1 and Type 2 systems have Kp = ∞ . The input test signal is a step, since Kp is specified. Finally, the error per unit step is
Example 7.6 P 355
PROBLEM: Given the control system in Figure, find the value of K so that there is 10% error in the steady state.
Basil Hamed
30
SOLUTION: Since the system is Type 1, the error stated in the problem must apply to a ramp input; only a ramp yields a finite error in a Type 1 system. Thus,
k= 672
7.5 Steady-State Error for Disturbances
Feedback control systems are used to compensate for disturbances or unwanted inputs that enter a system. The advantage of using feedback is that regardless of these disturbances, the system can be designed to follow the input with small or zero error.
Basil Hamed
31
Basil Hamed
32
But
Substituting Eq. (2) into Eq. (1) and solving for E(s), we obtain
1
2
To find the steady-state value of the error, we apply the final value theorem3 to Eq. (3) and obtain
3
Example 7.7 P.357
Basil Hamed
33
SOLUTION: The system is stable.
The steady-state error component due to a step disturbance is found to be
7.6 Steady-State Error for Nonunity Feedback Systems
Control systems often do not have unity feedback because of the compensation used to improve performance or because of the physical model for the system.
Basil Hamed
34
Example 7.8 P. 359
PROBLEM: For the system shown, find the system type, the appropriate error constant associated with the system type, and the steady-state error for a unit step input. Assume input and output units are the same.
Basil Hamed
35
SOLUTION: After determining that the system is indeed stable, one may impulsively declare the system to be Type 1. This may not be the case, since there is a nonunity feedback element,
The first step in solving the problem is to convert the system into an equivalent unity feedback system.
Example 7.8 P. 359
Basil Hamed
36
we find
Thus, the system is Type 0, since there are no pure integrations in above Eq. The appropriate static error constant is then Kp, whose value is
The steady-state error, e(∞) is
7.7 Sensitivity
Basil Hamed
37
7.7 Sensitivity
For example, assume the function F = K/(K + a)
If K = 10 and a = 100, then F = 0.091.
If parameter a triples to 300, then F = 0.032.
We see that a fractional change in parameter
a of (300 — 100)/100 = 2 (a 200% change),
yields a change in the function
F of (0.032 - 0.091)/0.091 = -0.65 (-65% change).
Thus, the function F has reduced sensitivity to changes in parameters.
Basil Hamed
38
Sensitivity and Robustness
• Parameter uncertainty: nominal design cannot be implemented exactly.
• System must perform satisfactorily for perturbed system
• Robust system: behavior does not significantly deteriorate due to parameter perturbations.
• Sensitivity: measure of changes in a system property due to changes in a parameter value.
Basil Hamed
39
7.7 Sensitivity
Sensitivity is the ratio of the fractional change in the function to the fractional change in the parameter as the fractional change of the parameter approaches zero. That is,
Basil Hamed
40
which reduces to
Example 7.10 P. 362
PROBLEM: Given the system shown, calculate the sensitivity of the closed-loop transfer function to changes in the parameter a. How would you reduce the sensitivity?
Basil Hamed
41
SOLUTION: The closed-loop transfer function is
which is, in part, a function of the value of s. For any value of s, however, an increase in K reduces the sensitivity of the closed-loop transfer function to changes in the parameter a.
Example 7.11 P. 363
PROBLEM: For the system shown, find the sensitivity of the steady-state error to changes in parameter K and parameter a with ramp inputs.
Basil Hamed
42
SOLUTION: The steady-state error for the system is
7.8 Steady-State Error for Systems in State Space
Basil Hamed
43
Analysis via Final Value Theorem
A single-input, single-output system represented in state space can be analyzed for steady-state error using the final value theorem and the closed-loop transfer
Basil Hamed
44
Consider the closed-loop system represented in state space:
The Laplace transform of the error is
where T(s) is the closed-loop transfer function, we obtain
Applying the final value theorem, we have
Example 7.13 P. 365
PROBLEM: Evaluate the steady-state error for the system shown for unit step and unit ramp inputs. Use the final value theorem.
Basil Hamed
45
SOLUTION:
Example: Step Input
Basil Hamed
46
Find steady state error for step input
Example: Step Input
Basil Hamed
47