Spooky2 Scalar

MAY 2025

Table of Contents

1. About Me
2. Honorable Mentions
3. About Scalar Energy
4. The Benefits of Scalar Energy
5. Setting Up and Tuning Spooky2 Scalar
6. The Different Modes of Spooky2 Scalar
7. Spooky2 Harmony
8. Imprinting
9. FAQ
10. Q&A

​

About Me

• Hi! My name is Kevin Fay
• I am a health coach, nutrition specialist, and advocate for holistic wellness—combining conventional health strategies with cutting-edge frequency healing. I have expertise in Spooky2 systems (including Scalar, Generator X Pro, and software optimization). I empower individuals to take control of their well-being through personalized approaches.
• My coaching work entails of a test-based approach to provide individualized nutritional advice. I focus on the 3 factors responsible for about 90% of chronic degenerative disease:
1. Chronic inflammation
2. Type B Malnutrition
3. Dysbiosis (Imbalance of the gut microbiome)
• While taking a more traditional approach to promote better health and well-being through diet and exercise, I am a strong believer on more benefits to be had through frequency healing. It serves as great means of detoxing and I suggest all users new to rife therapy and Spooky2 products to always begin with the Terrain Protocol,

Disclaimer: I am not a doctor or medical practitioner and I am not here to provide medical advice. I am here to share my knowledge and experience as a user of Spooky2 equipment and software. Spooky2 Scalar is intended for using as an experimental electronic device only. Do not use Spooky2 Scalar if you are pregnant or have a pacemaker.

​

Honorable Mentions

James Clerk Maxwell

(1831 - 1879)

​

• Scottish scientist and mathematician believed to have first discovered scalar energy.

​

• Responsible for the classical theory of electromagnetic radiation, which was the first theory to describe electricity, magnetism and light as different manifestations of the of the same phenomenon.

​

• Laid the theoretical groundwork for what would later be associated with scalar energy,

. 

Honorable Mentions

Nikola Tesla

(1856 -1943)

​

• Nikola Tesla advanced Maxwell’s findings, and invented machines that proved the existence of scalar energy. He called the powerful non-Hertzian energy (without frequencies) Scalar.

​

• Arrived in the United States in 1884, at the age of 28 and by 1887 had filed for a series of patents that described everything necessary to generate electricity using alternating current, or AC.

​

• He had said ”If you wish to understand the Universe, then think of energy, frequency and vibration.”

​

• Found that scalar waves travel faster than the speed of light and not electromagnetic but composed of pure zero point energy.

Honorable Mentions

Royal Rife

(1888 -1971)

​

• American Inventor, scientist and engineer known for microscopes and the Rife Machine.

​

• Believed that microorganisms, including bacteria, viruses, and parasites, were at the root of all disease.

• Cured 16 terminally ill patients with various cancers using resonant frequencies back in 1934. The first 14 patients recovered in just 70 days, and the remaining two recovered three weeks later.

​

• Combined with Nikola Tesla’s discovery, rife technology can be utilized in the scalar field for further benefit when working in tandem.

​

​

​

​

Honorable Mentions

Dr. Konstantin Meyl

(1952 - )

• Dr. Meyl discovered a fundamental mistake in Maxwell's Equations. By fixing these equations, Meyl was able to elegantly derive Tesla's results as well as explain many other unexplained physical effects in science.

​

• Meyl's theory, like all good theories explain all current results but is able to extend scientific explanation to include results that were previously outside the theory.

​

• His groundbreaking research suggests that many of the most famous temples of antiquity were not just religious relics, but advanced devices built to harness a form of “scalar” physics once known to the ancients and now lost to mainstream science.

​

​

​

What is Scalar Energy?

• Scalar waves are produced when two equal and opposite electromagnetic hertzian waves come together from two different vectors, and cancel each other out to access the zero point.
• They are longitudinal in nature in contrast to transverse electromagnetic waves. They propagate at a speed greater than that of light.
• Scalar waves can carry out lossless transmission of energy over vast distances, pass through solid metal objects with no loss of power, and transport energy without the need of wires. 
• They are contradictory in a sense that scalar energy is very powerful and capable of passing through solid objects and Faraday cages at vast distances at the speed of light, but they are very subtle and soothing on humans and animals.

The Benefits of Scalar Energy

​

​

​

• Increases cell energy.
• Boost energy levels.
• Open the Chakra.
• Slows aging.
• Enhances body circulation.
• Reduce high blood pressure.
• Strengthen the immune system.
• Enhance mental capacity.
• Reduces pain and inflammation.
• Improves sleep quality.
• Enhances focus and concentration.
• Neutralize the harmful effects of EMF (Electro Magnetic Field) from cell phones, computers, wifi, etc.
• Repairs DNA and protects it from damage.
• Enhances plant health and growth.

​

​

Scalar waves constitute a distinctive energy that, when skillfully deployed elevates cellular energy levels. The greater the energy within our bodies, the more efficiently our cells absorb nutrients and eliminate harmful toxins and waste.

​

Scientific research suggests that scalar energy can benefit humans, animals, and plants by promoting balance and vitality. Additionally, thousands of users have shared experiences of reduced fatigue, improved well-being, and increased energy after spending time in the scalar field.

Setting Up Spooky2 Scalar

​

​

1. Place the Spooky2 Transmitter and Receiver at intended positioning. Boxes should be at least 6 feet apart but closer to 10 would be better.

​

• Connect the 12V Power Adapter to the Transmitter power port.

​

• Plug the link cable into the Transmitter and Receiver.

4) Turn on and tune the Transmitter.

​

Setting up Spooky2 Scalar is so easy to do!

Spooky2 Scalar Transmitter

​

​

Frequency Display – Used to help tune to the frequency to detect the scalar field. Will turn off after five minutes,

Link Cable Connector – Connects from this port to the Receiver port.

Power Port – Connects power cable.

Optional Generator – If connecting a Generator X Pro for Rife mode, you will connect to this port using a BNC cable.

Switch – On or Off

Tuning Adjustment – Knob under the Frequency Display to tune to Spooky2 Scalar like a radio.

Tuning Light – When at maximum brightness, the scalar field has been detected.

Output coil – Used for item you are looking to imprint on.

​

Spooky2 Scalar Receiver

​

​

Link Cable – The link cable can be stored in this component when not in use,

​

Power Cable – The power cable can be stored in is compartment when not in use.

Receiver Light – Used to confirm that the scalar field has been found. It will be a dark orange / red ring. Note: Remember to turn off after.

​

Link Cable Connector – Used to connect to Transmitter box.

​

Input Coil – Substances such as essential oils, vitamins and medication can be placed here for additional benefit.

​

​

Tuning Spooky2 Scalar

Tuning Spooky2 Scalar is just like a radio and very simple to do. Turn the small knob anticlockwise until the LED light is at maximum brightness.

​

There are two peaks during tuning. The first peak in the tuning light indicates that the “ideal” scalar frequency has been found. The frequency range when the light illuminates is quite broad(should be somewhere in between 5 – 7 MHz). You will need to tune each time using.

​

If you continue you the tuning knob anticlockwise, the indication light will extinguish and then will come back on. This second lower frequency is the EMF operating frequency. It is confirmation that the scalar field was found in the previous step. Do not use this second peak as the EMF operating frequency. It should not be harmful, but it will serve the user no benefit either.

​

​

​

Spooky2 Scalar Placement

​

The lids of the boxes should be facing each other and be at least 6 feet apart.

​

The boxes do not have to be perfectly aligned but try to get as close as possible. As a tip, consider purchasing a pair of TV tray tables. This way, you at least know the height of the two boxes are level with each other.

​

The Scalar field is zeppelin or American football shaped. It’s height will be half its length.

​

After tuning, you can confirm the Scalar field has been picked up by pressing the Tuning Light button on the Receiver (Remember to turn off).

​

​

Different Modes for Spooky2 Scalar

There are now four different modes to Spooky2 Scalar with the introduction of Spooky2 Harmony

• Pure Scalar – This is the easiest way of applying healing scalar energy because nothing needs to be done. You don’t even need a generator.
• Molecular Scalar – Not that much more complicated as now you are simply placing a substance on the receiver coil that can further enhance the Scalar signal. You will receive the benefits of that substance placed on the receiver coil. This could be essential oils, medication or vitamins.
• Rife Scalar – Combines the discoveries of Royal Rife and Nikola Tesla in this mode by applying frequencies in the scalar field. Royal Rife found that pathogens respond to a particular frequency. Spooky2 Scalar can apply this frequency using healing scalar waves.
• Scalar Harmony – Now the fourth mode with its introduction in the summer of of 2024 and can assist in transmitting healing frequencies through the scalar field.

Spooky2 Scalar Harmony

​

​

Still a relatively new accessory for the scalar system, Spooky2 Scalar Harmony introduces an innovative way of receiving healing audio frequencies. With Scalar Harmony, you can now receive soothing musical tones, Solfeggio frequencies and meditative beats via scalar energy for a more refreshing experience.

​

Spooky2 Scalar Harmony

​

​

​

1. Set up and tune Spooky2 Scalar as you normally would.
2. Determine if your Spooky2 Scalar already has the locating button built in,
3. Place the Spooky2 Harmony on the receiver coil. The locating button should fit snugly into the small hole on the underside of the handle.
4. Plug the audio input port and then plug the other end of the audio device.
5. Scalar Harmony will now broadcast healing audio, music, Solfeggio frequencies or tones from your audio device.
6. Adjust the volume of Scalar Harmony by adjusting the volume of the audio player. Ensure the audio player is not on mute.

​

Setting up Scalar Harmony

Spooky 2 Scalar Imprinting

There are four ways to imprint frequencies into substances using Spooky2. They are Spooky2 PEMF Coil, Spooky2 Cold Laser, Spooky2 Plasma and Spooky2 Scalar.

​

For this presentation, we will just focus on imprinting with Spooky2 Scalar. You can imprint on water, crystals, holographic stickers, essential oils, etc.

​

You can place a glass of water on the transmitter coil during Molecular or Rife Scalar treatments. This process is called imprinting. After you put the glass on the transmitter coil, retune your Spooky2 Scalar before your Scalar treatment. When you finish the Scalar treatment, you can drink the water during the day to enhance the treatment effects.

Spooky2 Scalar Imprinting

Spooky2 Scalar Imprinting Steps:

1. Place object to be imprinted on the Transmitter coil.
2. Place the substance to imprint from on the Receiver coil.
3. Turn on Spooky2 Scalar Transmitter box and tune after the objects are set in place.
4. You can sit in the field while it imprints (except if you are pregnant or have a pacemaker).
5. A glass of water may take only minutes to imprint, while larger volumes are expected to take longer.
6. There should be no concerns about over-dosing.

​

Note: Be cautious that substance on the receiver coil is not in a plastic container or metal cap.

​

Spooky2 Scalar FAQ

• Where should the Spooky2 Scalar boxes be placed when laying down?

Placed head to toe laying down is ideal as the whole body is within the scalar field, but placed on each side can be beneficial too.

• How long can I stay in the scalar field? Is there ever too much?

You can accept scalar energy for up to 6 hours, and no, there is no harm in staying in the scalar field and sleeping through it. Your body will just stop accepting the frequencies after 6 hours.

• What do scalar waves feel like?

Scalar waves are very gentle and subtle. User experiences vary but many find a cool, relaxing feel from scalar waves. Some users have difficulty sleeping in it. I really enjoy it and do so every night.

• How does Spooky2 Scalar compare to Spooky2 Central? Which one is better?

My view is neither is better over the other and are used for different purposes. Spooky2 Scalar is intended for healing while Spooky2 Central is more intended for killing programs.

Q & A

Thank you and I hope you enjoyed the Presentation!

​

As appreciation to all attendees, you’ll get a 5% discount code on Spooky2 products.

​

Coupon Code: Kevin0522

​

Keep in touch and let’s grow the community.

​

Contact Information:

​

Kevin Fay

ProactiveHealth1111@protonmail.com