����PRESENTATION ON �WIND TURBINE

• BRANCH-E & TC ENGG
• SUBJECT- RENEWABLE ENERGY SOURCE
• CHAPTER – 8 – WIND ENERGY CONVERTERS
• TOPIC- WIND TURBINE
• SEM-6^TH
• FACULTY – Er. RASHMI RANJAN BEHERA (LECT. E & TC ENGG DEPARTMENT)
• AY-2021-2022, SUMMER-2022

​

Alternate Energy Activities

A look at Wind Power

Wind Power

The first use of a large windmill to generate electricity was a system built in Cleveland, Ohio, in 1888 by Charles F. Brush. The Brush machine was a postmill with a multiple-bladed "picket-fence" rotor 17 meters in diameter, featuring a large tail hinged to turn the rotor out of the wind. It was the first windmill to incorporate a step-up gearbox (with a ratio of 50:1) in order to turn a direct current generator at its required operational speed (in this case, 500 RPM.)

​

Modern Wind Turbine

Commercial wind energy is one of the most economical sources of new electricity available today. Wind turbines can be set up quickly and cheaply compared with building new coal-fired generating stations or hydroelectric facilities. Modern wind generating equipment is efficient, highly reliable, and becoming cheaper to purchase. The environmental impact of large wind turbines is negligible compared with an open pit coal mine or a reservoir, and during their operation produce no air pollution. Because of these factors, wind energy is recognized as the world's fastest-growing new energy source.

How does a Wind Turbine Work?

• Wind turbines operate on a simple principle. The energy in the wind turns two or three propeller-like blades around a rotor. The rotor is connected to the main shaft, which spins a generator to create electricity.
• Wind turbines are mounted on a tower to capture the most energy. At 100 feet (30 meters) or more above ground, they can take advantage of faster and less turbulent wind.
• Wind turbines can be used to produce electricity for a single home or building, or they can be connected to an electricity grid (shown here) for more widespread electricity distribution.

​

Office of Energy Efficiency and Renewable Energy.

How does a Wind Turbine Work?

Inside view of Wind Turbine

Office of Energy Efficiency and Renewable Energy.

​

How does a Wind Turbine Work?

• Anemometer: Measures the wind speed and transmits wind speed data to the controller.
• Blades: Most turbines have either two or three blades. Wind blowing over the blades causes the blades to "lift" and rotate.
• Brake: A disc brake, which can be applied mechanically, electrically, or hydraulically to stop the rotor in emergencies.
• Controller: The controller starts up the machine at wind speeds of about 8 to 16 miles per hour (mph) and shuts off the machine at about 55 mph. Turbines do not operate at wind speeds above about 55 mph because they might be damaged by the high winds.
• Gear box: Gears connect the low-speed shaft to the high-speed shaft and increase the rotational speeds from about 30 to 60 rotations per minute (rpm) to about 1000 to 1800 rpm, the rotational speed required by most generators to produce electricity. The gear box is a costly (and heavy) part of the wind turbine and engineers are exploring "direct-drive" generators that operate at lower rotational speeds and don't need gear boxes.
• Generator: Usually an off-the-shelf induction generator that produces 60-cycle AC electricity. High-speed shaft: Drives the generator. Low-speed shaft: The rotor turns the low-speed shaft at about 30 to 60 rotations per minute.
• Nacelle: The nacelle sits atop the tower and contains the gear box, low- and high-speed shafts, generator, controller, and brake. Some nacelles are large enough for a helicopter to land on.
• Pitch: Blades are turned, or pitched, out of the wind to control the rotor speed and keep the rotor from turning in winds that are too high or too low to produce electricity.
• Rotor: The blades and the hub together are called the rotor.
• Tower: Towers are made from tubular steel (shown here), concrete, or steel lattice. Because wind speed increases with height, taller towers enable turbines to capture more energy and generate more electricity.
• Wind direction: This is an "upwind" turbine, so-called because it operates facing into the wind. Other turbines are designed to run "downwind," facing away from the wind.
• Wind vane: Measures wind direction and communicates with the yaw drive to orient the turbine properly with respect to the wind.
• Yaw drive: Upwind turbines face into the wind; the yaw drive is used to keep the rotor facing into the wind as the wind direction changes. Downwind turbines don't require a yaw drive, the wind blows the rotor downwind.
• Yaw motor: Powers the yaw drive.

Where should you put a Wind Turbine?

How much Power does a Wind Turbine Generate?

Kinetic Energy = Work = ½mV²

Where:

M= mass of moving object

V = velocity of moving object

​

What is the mass of moving air?

​

= density (ρ) x volume (Area x distance)

= ρ x A x d

= (kg/m³) (m²) (m)

= kg

V

A

d

How much Power does a Wind Turbine Generate?

Power = Work / t

= Kinetic Energy / t

= ½mV² / t

= ½(ρAd)V²/t

= ½ρAV²(d/t)

= ½ρAV³

​

Power in the Wind =½ρAV³

​

d/t = V

​

A couple things to remember…

Power in the Wind = ½ρAV³

​

Swept Area – A = πR² (m²) Area of the circle swept by the rotor.

​

ρ = air density – in Colorado its about 1-kg/m³

​

Example – Calculating Power in the Wind

Power in the Wind = ½ρAV³

​

V = 5 meters (m) per second (s) m/s

ρ = 1.0 kg/m³

R = .2 m >>>> A = .125 m²

Power in the Wind = ½ρAV³

= (.5)(1.0)(.125)(5)³

= 7.85 Watts

Units = (kg/m³)x (m²)x (m³/s³)

= (kg-m)/s² x m/s

= N-m/s = Watt

​

Is Wind Power 100% efficient?

Power from a Wind Turbine Rotor = C_p½ρAV³

​

C_p is called the power coefficient.

C_p is the percentage of power in the wind that is converted into mechanical energy.

​

What is the maximum amount of energy that can be extracted from the wind?

​

Betz Limit:

What’s the most power the .2-m turbine in the example can produce in a 5 m/s wind?

​

7.85 Watts x .5926 (Betz Limit) = 4.65 Watts

​

Or try this online Power calculator

THANK YOU