INSTALLATION INSTRUCTIONS
The delivery of the technical armband includes three parts: a fabric armband, a plastic back platform and a double-sided sticker.
The customer supplies a phone-specific TPU protective case with the phones or it is included already into delivery.
- Install the plastic back platform in the fabric armband by first threading one end of the back platform into the pocket in the armband. Make sure the back platform is firmly on the bottom of the pocket. Stretch the edges of one end of the pocket of the fabric jacket over the back panel. Make sure there are no wrinkles in the fabric and that the back platform stays in the pocket tightly.
- Attach the 2-sided sticker to the backing board by removing the sticker's protective paper and gluing it to the backing board.
- Glue the TPU protective cover to the back platform by removing the second protective paper from the sticker and pressing the protective cover firmly onto the sticker.
- Attach the phone by threading it into the phone-specific protective case.
- Now the phone stays securely in the armband and can be used either vertically or horizontally. The back platform rotates 360 degrees
MANUAL
Operation is simple and fast:
- Put the armband on the arm so that the orange stitching of the armband is closer to the shoulder. The armband is conical shaped, and the orange end is wider than the other end.
- Tighten both velcro straps of the armband to fit so that the armband does not squeeze the arm too much
- Test the tightness by rotating the arm: the armband must not rotate on the arm. Tighten the velcro if necessary.
- Find the best position for using the phone with the following steps:
- you can roll the armband around the arm
- you can rotate the phone with the back cover 360 degrees
- The materials are breathable and feel pleasant on the skin.
- The fabric armband can be washed in a normal 40 degree machine wash.
- Tarramateriaali mahdollistaa takakuoren myöhemmän irrottamisen ilman laitteiden rikkoutumista.
TECHNICAL INFORMATION
- Suitability: any smartphone or mobile device up to 6.5', maximum weight 270g
- Use: right and left arm
- Fabric: antibacterial, breathable and flexible elastomer
- Weight: 114 gr
- Dimensions: length 150mm
- Phone rotation: 360 degrees
- Available sizes: XS, S, M, L, XL, XXL, XXXL and TB
- Operating temperature: -30C...+50C degrees