Fingerprint Technology Lock
No electric wave, free from signal interference
Modular electromechanical integration system
Matic F
Background and Motivation
With the advancement of science and technology, many devices are gradually developing in the direction of biometrics, the purpose is to improve the convenience for users and improve the functions of the device.
DEFEND GROUP gear shift lock have always been widely used and supported by consumers. If the biometric technology can be implemented, then it would be much more convenient to use, it is bound to make the vehicle anti-theft system more advanced.
Uniqueness
Unique feature
Universality
Everyone has the same characteristics
Permanent
Features do not change or change very slowly
Measurability
You can use simple techniques to measure the similarity
Convenience
No key or keycard required
No need to remember ID or password
Receptivity
A measurement method that can be accepted by the public
No deceive
The instrument is not deceived by disguise
Why use biometrics?
What are the advantages?
Introduction
FAR
False Acceptance Rate
The fingerprint reader is composed of software and hardware. The hardware part is a fingerprint sensor for collecting fingerprints. The software is a fingerprint recognition algorithm, which compares the fingerprint files in the database through the algorithm.
Safety Level
The lower the safer
FAR
Convenience
The lower number is easy to use
FRR
Acceptance
FRR
False Rejection Rate
Rejection
Application Date: 5th Nov.,2021
Application Number: 110213101
Paten Name: Electronically controlled gearshift lock with biometric identification.
Patented Technology
Patent Certificate
F
Fingerprint
F
First
F
Future
Unique features, improve the anti-theft level
Modular electromechanical integration system.
Characteristics
Biometric
The hidden gearshift lock is matched with a biometric system, which enhances the appearance of technology and makes it more intuitive to use.
Characteristics
Technological evolution
More convenient
The fingerprint recognition system completes the locking/unlocking through fingerprint sensor recognition, no traditional key or remote control is required for operation.
Technological evolution
More convenient
Mechanical Protection Mechanism
Patented interlocking design mechanism, after unlocking, the internal actuating spring will pop out interlocking, and the interlocking mechanism will return to the unlocked state.
Characteristics
Improve the anti-theft level
ACC Security Protection Mechanism
The fingerprint detection is correct, the lock can only be unlocked.
The fingerprint detection is correct, the lock can only be locked.
This lock will not be accidentally
activated while the car is being driven.
Characteristics
Lock/Unlock
Lock and unlock through fingerprint recognition.
Characteristics
Avoid radio frequency signal interference
Enhance anti-theft
Unique features
Basic Content of the Module
Gear Lever
Control Module
Motor Lock Module
Bio Sensing Module
The Composition of the Lock Module
Control
Module
Drive
Module
Lock/unlock Module
Biological Characteristics
Sensing input
Feature Recognition
Module
Signal Judgment Input
Security Module
System Chart
Locking Operation Flowchart
Biological Characteristics
System Standby
Signal Judgment
Controller Comparison
Drive Circuit Action
Lock
Buzzer Tone
Any signal does not match to return to standby mode
Both sets of signals are in line with
Unlock Operation Flowchart
Biological Characteristics
System Standby
Signal Judgment
Controller Comparison
Drive Circuit Action
Unlock
Buzzer Tone
Any signal does not match to return to standby mode
Both sets of signals are in line with
Installation Diagram
1
Embedded version
Installation Diagram
2
Stick version
Operating Instructions
Administrator
The first three set up fingers are administrator, and the administrator can authorize other fingerprints to set up.
Light Definition
(a) Lock/Unlock success
(b) Fingerprint pattern learning success
(a) Set up fingerprint successfully
(b) Delete fingerprint successfully
Light display
Fingerprint recognition
Light display
Operating Instructions
MATIC F Operation – Lock / Unlock (Factory State)
Factory state
Press the fingerprint with any finger to perform the lock/unlock action.
Lock ( It can be locked by pressing any finger when the fingerprint is not set up)
*If the gear is not in the “P” position when locking, the buzzer will sound.
Unlock ( It can be unlocked by pressing any finger when the fingerprint is not set up)
*Only in the “P” position can be locked
*Only in the “P” position can be unlocked
ACC OFF
Fingerprint
recognition
(press for 1 second)
After verification, the green light will stay on for 1 second, and the buzzer sounds
Successfully
lock
Successfully
unlock
ACC ON
After verification, the green light will stay on for 1 second, and the buzzer sounds
Fingerprint
recognition
(press for 1 second)
Operating Instructions
First Set Up Operation
※The first 3pcs fingerprints are the administrators, which can set up 100pcs fingerprints.
1st Fingerprint Set Up Method
Press any finger for 5 seconds. Blue light flashes after green light. Release your finger and the blue light will stay on, immediately enter the learning mode
Perform first learning. Finger pressing the sensing area for 1 second. Green light will stay on for 1 second if successful. Release your finger and the blue light will stay on.
Perform second learning. Finger pressing the sensing area for 1 second again. Green light will stay on for 1 second if successful. Release your finger and the blue light will stay on.
Perform third learning. Finger pressing the sensing area for 1 second again. Green light will stay on for 1 second if successful. Release your finger.
When the set-up is successful, the green light will stay on for 2 second, and the fingerprint set-up is completed.
MATIC F Operation - Register First Fingerprint
Operating Instructions
Operation of Setting Up Authorization
※Before setting up other fingerprints, it needs to login the administrator's finger
After 2nd~Fingerprint Set Up Method
Perform administrator authentication. Press the administrator’s finger for 5 seconds. Blue light flashes after green light. Release your finger and the blue light will stay on, immediately enter the learning mode.
Press again the administrator’s finger.
Green light will stay on for 1 second if successful. Release your finger and the blue light will stay on.
Perform first learning.
Finger pressing the sensing area for 1 second. Green light will stay on for 1 second if successful. Release your finger and the blue light will stay on.
Perform second learning. Finger pressing the sensing area for 1 second again. Green light will stay on for 1 second if successful. Release your finger and the blue light will stay on.
Perform third learning. Finger pressing the sensing area for 1 second again. Green light will stay on for 1 second if successful. Release your finger.
When the set-up is successful, the green light will stay on for 2 seconds, and the finger set-up is completed.
MATIC F Operation - Authorized to Set Up Fingerprints
Operating Instructions
Delete Operation
※For used cars, if the administrator cannot be traced back, we will remove the sensor module to reset and return to the factory state.
Delete all fingerprint
Delete all fingerprints successfully
Press any finger for 10 seconds
The green light will stay on for 1 second, and the buzzer sounds
The blue light flashes from the 5th second, and the red light flashes from the 10th second, release your finger, the red light will stay on, then enter the delete mode
Perform administrator authentication within 5 seconds, the administrator presses the sensing area for 1 second, and the green light will stay on for 2 seconds after the verification
MATIC F Operation - Delete Operation
Operating Instructions
Lock / Unlock Operation
※When driving, the ACC status is ON, and it will not be locked due to accidental touch.
Lock ( It can be locked by pressing any finger when the fingerprint is not set up)
*If the gear is not in the “P” position when locking, the buzzer will sound.
Unlock ( It can be unlocked by pressing any finger when the fingerprint is not set up)
*Only in the “P” position can be locked
*Only in the “P” position can be unlocked
ACC OFF
Fingerprint
recognition
(press for 1 second)
After verification, the green light will stay on for 1 second, and the buzzer sounds
Successfully
lock
Successfully
unlock
ACC ON
After verification, the green light will stay on for 1 second, and the buzzer sounds
Fingerprint
recognition
(press for 1 second)
MATIC F Operation - Lock / Unlock Operation
(Registered fingerprint state)
Operating Instructions
ACC ON/OFF Operation
※When the ACC ON and the authenticated fingerprint cannot be unlocked, the electronic control can be used to unlock it.
ACC ON
Use the registered finger, press sensor area.
If the fingerprint cannot be unlocked. (the red light will stay on)
Unable to unlock, and also unable to operate the gear shift.
Use the key to turn ACC ON and OFF for 6 times.
(It needs to be completed within 2 minutes.)
Unlocking by ACC operation is successful, and the buzzer will sound.
Successfully unlock
ACC ON/OFF Operation (※ If the registered finger cannot be unlocked)
MATIC F Operation - ACC ON/OFF Operation
Operating Instructions
MATIC F Operation – Key cylinder Version
Key cylinder Version
※When the ACC ON and the authenticated fingerprint cannot be unlocked, can use the key to operate.
ACC ON
Use the registered finger, press sensor area. If the fingerprint cannot be unlocked. (the red light will stay on)
Unable to unlock, and also unable to operate the gear shift.
Key cylinder Version (※ If the registered finger cannot be unlocked)
Use key cylinder version, insert thekey and turn it clockwise until it reaches the end.
Successfully unlock
The cylinder pop up, it has been unlock.
Step 1
ACC ON / OFF for 6 times.
(It needs to be completed within 2 minutes.)
Backup Device of ACC Operation
※When ACC ON, and the verification fingerprint cannot be unlocked, Use the key to turn ACC ON and ACC OFF for 6 times. (It needs to be completed within 2 minutes.)
ACC ON
ACC OFF
Method of electronic control
Step 2
Successful unlock, the buzzer sounds, and the gear shift can be operated.
Backup Device of Key cylinder version
※When the ACC ON and the authenticated fingerprint cannot be unlocked, can use the key to operate.
Method of key cylinder Version
Step 1
Insert the key.
Step 2
Turn it clockwise until it reaches the end.
Step 3
The cylinder pop up, it has been unlock.
Q. Is it needs the fingerprint recognition to lock/unlock?
A. YES! It needs the fingerprint recognition to lock/unlock, and only ACC OFF can be locked, ACC ON can be unlock, it can't be locked when driving.
Q. How many fingerprints can be stored?
A. Up to 100 pcs.
Q. Can the same fingerprint be learned and stored repeatedly?
A. Yes, if you learn the same fingerprint repeatedly, you can also increase the recognition effect.
Q. Why can any fingerprint that I haven't learned yet be able to be unlocked?
A. This is the original setting of the product, any fingerprint can be unlocked before any fingerprint is learned and stored. After the first learning, only the learned fingerprint can be unlocked.
Q. I have already learned the first fingerprint, how can I authorize other users to use it?
A. The first three fingerprints learned are managers, who can authorize other users at any time, but must be verified by managers.
Q. My used car has a fingerprint technology lock, can it still be used?
A. If the fingerprint cannot be stored in the standard learning mode, it means that the previous owner did not clear and delete all the fingerprints to restore to the original state. If you want to continue using it, please contact your local agency.
Q&A (一)
Q. Can I delete one of my fingerprints after authorization?
A. The administrator can enter the delete mode to delete all fingerprints and restore them to the original factory mode, but cannot delete only one of the fingerprints.
Q. Can I reinstall the fingerprint technology lock of my old car to my new car?
A. The mechanism design of the fingerprint technology lock is for each cars, and different styles of cars cannot be installed.
Q. My fingers are prone to sweating and are often dirty. I am afraid that it will affect the fingerprint recognition. What should I do?
A. We suggest that you can learn to identify the same fingerprint 3-5 times, and learn 3 different fingerprints for the left and right hands, and the identification effect will be better.
Q. Will the installation of fingerprint technology lock affect the safety structure of the car?
A. The fingerprint technology lock is a special installation design for each car, which does not damage the structure of the car body and does not affect the warranty of the car.
Q. I have installed some automotive electronic accessories, will installing the fingerprint technology lock effect or interfere?
A. Fingerprint technology lock is a non-RF signal product and will not interfere with RFID/Keyless or high and low-frequency signals.
Q. If the fingerprint technology lock cannot be unlocked suddenly, and the verification fails (the red light is on) all the time, how can I unlock it?
A. Choose two ways to operate unlock
1. It can be unlocked by electronic control: use the key to turn ACC ON and OFF 6 times.(It needs to be completed
within 2 minutes.)
2. It can be unlocked by mechanical (key cylinder): insert the key, and turn the key cylinder to the right till the end.
Q&A (二)
Product Features Specification Sheet
項次一 | 項目名稱 | 主機電氣機械規格 |
1 | 額定電壓 | DC 12V |
2 | 工作電壓範圍 | DC +8V~+15V |
3 | 待機電流 | MAX 3mA @ Standby Mode |
4 | PCB尺寸 | 45mm(L)*45mm(W)*1.6mm(H) |
5 | 本體尺寸 | 55mm(L)*55mm(W)*22mm(H) |
6 | 外殼材質 | 尼龍+橡膠 |
項次二 | 項目名稱 | 指紋模組電氣機械規格 |
1 | 工作電流 | 40~50mA |
2 | 待機電流 | 30~35μA |
3 | 錯誤接受率 | FAR ＜0. 001% |
4 | 錯誤拒絕率 | FRR ＜0.1% |
5 | 識別速度 | ≤ 0.5秒 |
6 | 可註冊指紋枚數 | 100 |
7 | 指紋採集方向 | 360°全方位 |
8 | 指紋採集區域 | 方形：13.50mm*13.50mm（含金屬環） |
9 | 工作溫度 | -20℃~80℃ |
10 | 工作濕度 | 40%RH~85%RH |
Product Features Specification Sheet
ITEM A | Name | Specification |
1 | Rate voltage | DC 12V |
2 | Operating voltage | DC +8V~+15V |
3 | Standby Current | MAX 3mA @ Standby Mode |
4 | PCB size | 45mm(L)*45mm(W)*1.6mm(H) |
5 | Main body size | 55mm(L)*55mm(W)*22mm(H) |
6 | Cover material | Nylon+Rubber |
ITEM B | Name | Fingerprint module electrically machinery specifications |
1 | Operating voltage | 40~50mA |
2 | Standby Current | 30~35μA |
3 | False acceptance rate | FAR ＜0. 001% |
4 | False rejection rate | FRR ＜0.1% |
5 | Recognition speed | ≤ 0.5 second |
6 | Number of fingerprints that can be registered | 100 |
7 | Fingerprint collection direction | 360° all-round |
8 | Fingerprint collection area | Square：13.50mm*13.50mm（including metal ring） |
9 | Working temperature | -20℃~80℃ |
10 | Working humidity | 40%RH~85%RH |
Product Features Specification Sheet
Reliability Test Report(I)
項次�No. | 試驗項目�Test Item | 試驗規定及方法�Test Standard and Method | 判定結果�Test Result | 實際開始�實際完成�Test Start�Test Finish | 測試結果�Test Result |
01 | 電子鎖具作動耐久�Action durable for electronic lock | 持續上、解鎖，數次100.000次�Continue lock & unlock for 100,000 times | 不得有鎖針卡住�The PIN can not get stuck | 20220705�|�20220706 | PASS |
02 | 指紋偵測作動耐久�Fingerprint detection durability | 按壓指紋，鎖具上解鎖，數次15.000次�Press fingerprint, let it lock and unlock for 15,000 times | 不得有誤判動作、指紋模組不得失效�It can't have misjudgment and the fingerprint mold can't lose efficacy | 20220706�|�20220715 | PASS |
03 | 電子鎖具作動電壓試驗�Lock action voltage test | 作動電壓：8V、10V、12V、14V�每個電壓操作10次�Action voltage: 8V、10V、12V、14V�Operate 10 time for each voltage | 試驗中正常動作不可有誤動作;試驗後亦能正常動作.�During the test, there should be no misoperation in normal action; after the test, it can also act normally. | 20220712�|�20220712 | PASS |
04 | 電源逆極性連接試驗�Power supply reverse polarity connection test | 電源端反接試驗電壓DC13.8V操作5min�Power supply terminal reverse connection test voltage DC13.8V operation 5min | 容許保險絲熔毀，試驗後亦能正常作動�The fuse is allowed to melt, and it still can operate normally after the test | 20220712�|�20220712 | PASS |
05 | 過電壓試驗�Overvoltage test | 1.電源端子施加試驗電壓DC14V 10分鐘�2.電源端子施加試驗電壓DC18V 1分鐘�1. Apply the test voltage DC14V to the power terminal for 10 minutes�2. Apply the test voltage DC18V to the power terminal for 1 minute | 試驗中正常動作不可有誤動作�;試驗後亦能正常動作.�During the test, there should be no malfunction in normal action�; After the test, it can also function normally | 20220712�|�20220712 | PASS |
Product Features Specification Sheet
Reliability Test Report(II)
項次�No. | 試驗項目�Test Item | 試驗規定及方法�Test Standard and Method | 判定結果�Test Result | 實際開始�實際完成�Test Start�Test Finish | 測試結果�Test Result |
06 | 過電流試驗�Overcurrent test | 額定電壓：DC 13.8V�電流：額定電流之135%�導通時間：10min�Rated voltage: DC 13.8V�Current: 135% of rated current�Conducting time: 10min | 試驗中正常動作不可有誤動作;試驗後亦能正常動作.�During the test, there should be no malfunction in normal action�; After the test, it can also function normally | 20220712�|�20220712 | PASS |
07 | 電源電壓變動試驗�(實車測試)�Power supply voltage fluctuation test�(Car test) | 引擎發動時之電壓改變試驗試驗電壓突波，KEY OFF（引擎熄火）至KEY ON（引擎發動）連續3次，之後直接操作部品，共5cycle�Voltage change test when the engine is started test voltage, KEY OFF (engine off) to KEY ON (engine start) for 3 consecutive times, and then directly operate the parts, a total of 5 cycles | 試驗中正常動作不可有誤動作;試驗後亦能正常動作.�During the test, there should be no malfunction in normal action�; After the test, it can also function normally | 20220718�|�20220718 | PASS |
08 | 掉落測試�Drop test | 1.包裝時以1.5M高度自由掉落，�2.包裝盒六個面均測試�1. Fall at a height of 1.5M when packing�2. The six sides of the box are tested | 1.包裝內部不得有任何損毀�2.產品操作均正常�1. There must be no damage inside the package�2. Product operation is normal | 20220715�|�20220715 | PASS |
09 | 靜電放電測試�Electrostatic discharge test | ESD測試(2KV)�ESD test (2KV) | 試驗後，產品操作正常;不可誤動作.�After the test, the product operates normally; no malfunction is allowed. | 20220630�|�20220630 | PASS |
10 | 振動(顛頗)試驗�Shock test | 顛簸試驗(可視為重覆之衝擊，可模擬�車輛行進於不良路面)�Jolt test (can be regarded as a repeated shock, can be simulated�Vehicles traveling on bad roads) | 試驗後，產品操作正常;不可誤動作�After the test, the product operates normally; no malfunction is allowed | 20220715�|�20220715 | PASS |
Product Features Specification Sheet
Reliability Test Report(III)
項次�No. | 試驗項目�Test Item | 試驗規定及方法�Test Standard and Method | 判定結果�Test Result | 實際開始�實際完成�Test Start�Test Finish | 測試結果�Test Result |
11 | 存放試驗�Storage test | 高溫高濕儲存試驗，�溫度85℃@濕度85±5%，存放120小時�High temperature and humidity storage test,�Temperature 85℃@humidity 85±5%, storage for 120 hours | 試驗後，產品操作正常;不可誤動作�After the test, the product operates normally; no malfunction is allowed | 20220629�|�20220704 | PASS |
12 | 環境試驗�Environmental test | 高溫耐久試驗，�常溫→50℃(48小時)→常溫2HR�High temperature endurance test,�Normal temperature→50℃(48 hours)→normal temperature 2HR | 試驗後，產品操作正常;不可誤動作�After the test, the product operates normally; no malfunction is allowed | 20220629�|�20220701 | PASS |
13 | 環境試驗�Environmental test | 低溫放置試驗�常溫→-20℃(48小時)→常溫2HR�Low temperature placement test�Normal temperature→-20℃(48 hours)→normal temperature 2HR | 試驗後，產品操作正常;不可誤動作�After the test, the product operates normally; no malfunction is allowed | 20220705�|�20220707 | PASS |
MATIC F
Fingerprint Technology Lock
THANK YOU