Directions

1. Color the front of the card. Colored pencil or highlighter works best for the light to shine through.
2. Fold card in half to get a good crease.
3. Unfold card and apply copper tape to all gray paths. Copper tape must go through the circle for the battery.
4. Bend the legs of the LEDs into the shape of an “L” as shown. Lay the LEDs on the designated spots.
5. Add additional copper tape over the battery legs on the same path as before.Secure the LEDs by firmly rubbing the tape down in all areas.
6. Roll up copper tape into a sticky tape loop and place on the battery circle.
7. Place the battery + side up on the battery circle.
8. Close the card and check your connection. If everything is connected properly the card will light up!

Printing Instructions

​

​

1. File, Print
2. Pages: select custom and type your 2 pages separated by a comma (1,2)
3. Expand more settings:select
1. print on both sides
2. flip on the short edge
4. Print