Department of Automobile Engineering
1
Design & development of e-bike�(Semi-enclosed e-bike)
Batch: D4
Done by
PRANAV SETHI - RA1711011010111
VASU DEVA RAO. D - RA1711011010127
ORUGANTI SAIRAM - RA1711011010137
Guided by
Mr. S. Yokeshwaran, M.E
Assistant Professor
Department of Automobile Engineering
Department of Automobile Engineering
2
OBJECTIVE OF THE PROJECT
TARGET OF THE PROJECT
Department of Automobile Engineering
3
LITERATURE SURVEY
Sl.no | Author Name | Project Title | Journal name/Year | Objective | Method | Conclusion |
1 | Vignesh.M , Dr. Arumugam K, Vinoth.S , Hariharan. | Design and Analysis of Frame of an Electric Bike | International Journal of Engineering Science Invention ISSN : 2319 – 6734, ISSN (Print): 2319 – 6726 | to design and analyse the frame of e-bike in CAD software's | The method section depicts a flowchart based on how the design and analysis of the frame was done, based on the requirement of the customer. The collection of data consists of several factors such as availability, machinability, cost, reliability, feasibility and ergonomics. The total length, height and weight were also taken into considerations. | The overall design is safe, effective, lightweight and reliable for the needs. Analysis results also prove to be much safer, still various analyses such as fatigue test and buckling can be done for finding our unsafe or non-reliable result. |
4
Sl.no | Author Name | Project Title | Journal name/Year | Objective | Method | Conclusion |
2 | Srinivas Mutyala | DESIGN AND DEVELOPMENT OF ELECTRIC MOTORBIKE | Procedia Materials Science 5 2250-2257 | Objective of this paper to was to explore the acceleration an electrically powered motorbike under Practical condition. | The method used here is that selecting and designing the e-bike components and do powertrain calculations. | This paper identifies potential barriers of electric motorcycle. The above prototype electric – motorbike had been tested in practical conditions. |
5
Sl.no | Author Name | Project Title | Journal name/Year | Objective | Method | Conclusion |
3 | A Karthi,N Afridhin, D Aravind, G Kamalesh, K Rathish Kumar | Design and Fabrication of an Electric Bike | International Research Journal of Engineering and Technology olume: 07 Issue: 02 | Feb 2020 | The main aim of this project is to give the exact view by bridling the various sources of energy available to mankind. | Study on Existing, Identify the input and output parameters by literature survey, Fabrication and Optimization, Statistical analysis of results | With the increasing consumption of natural resources of petrol, diesel it is necessary to shift our way towards alternate resources like the Electric bike and others because it is necessary to identify new way of transport. |
4 | Palak Desai, Darshan Kapadia, Tank Nikunj | DESIGN AND FABRICATION OF SOLAR TRI CYCLE | INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY | Reduced the physical effort to drive the tricycle, ,Top speed limit up to 20km/hr and average speed , | The method is based on the use of Components of tricycle. | The average and maximum speed was obtained as 12.8 kmph and 20 kmph respectively. Various vehicles of same category available in India was compared for different parameter and it was concluded that solar tricycle proved to a complete blessing to the disable community compared to other vehicle using various sources of energy. |
5 | M. Reddi Sankar , T. Pushpaveni, V. Bhanu Prakash Reddy | Design and Development of Solar Assisted Bicycle | International Journal of Scientific and Research Publications, Volume 3, Issue 3, March 2013 1 ISSN 2250-3153 | The solar assisted bicycle developed is driven by DC motor fitted in front or rear axle housing & operated by solar energy | The solar assisted bicycle consist of following components (fig.1) – hub motor, solar panel, voltage regulator, lead acid battery, motor controller, accelerator, bicycle[ | Solar assisted bicycle is modification of existing bicycle and driven by solar energy. It is suitable for both city and country roads, that are made of cement, asphalt, or mud. |
Department of Automobile Engineering
6
Methodology
Department of Automobile Engineering
7
Material Selection
Element | Content (%) |
Carbon(C) | 0.23 |
Manganese (Mn) | 1.5 |
Sulphur | 0.05 |
Silicon (Si) | 0.4 |
Phosphorous (P) | 0.05 |
Material Composition
Properties | Metric |
Ultimate Tensile Strength | 410 MPa |
Yield Tensile Strength | 240 MPa |
Modulus of elasticity | 200 GPa |
Bulk modulus | 140 GPa |
Shear modulus | 79.3 GPa |
Poisson’s ratio | 0.260 |
Density | 7.85 g/cm3 |
Mechanical Properties
Department of Automobile Engineering
8
Electric bike components
Electric bike consists of following components:
Department of Automobile Engineering
9
Frame
The frame is the backbone of the E-bike, The Frame is made up of mild steel (M.S. IS 2062). The frame is designed to withstand the weight of the person driving the unit, the weight of the load to be conveyed, and also to hold the accessories like a battery. The E-bike frame has been designed keeping in view the overall safety of the drivers. It was also kept in mind the various systems that have to be incorporated in the vehicle like the suspension system, braking system, etc. The frame of the E-bike resembles the head of an alien. The E-Bike has an innovative Steering system that allows the bikers to steer the vehicle up to a fixed lock angle. This steering system has been used in order to give the bikers the freedom to ride the vehicle within the lock limit to maintain stability.
E-Bike frame 3D Model
Department of Automobile Engineering
10
Battery
The battery is a prime storage of the electric power and whenever power required that time battery provides the power to electrical components in our E-Bike. We used two batteries which are hidden inside the base frame in our E-bike, 36 V 15-amp Lithium-ion rechargeable battery is used to drive 36v 350 watts BLDC hub motor with help of Motor controller and throttle and gets alternate source of recharge from solar energy which is from roof-mounted solar panel. Another 12 V 7.5-amp lead acid rechargeable battery is used to storge energy and utilizes its energy for electrical components like LED head backlight, side indicators, horn, and braking light, dynamo energy is used as an alternative source to recharge this battery while the vehicle is in running.
Parameters | 36 V 15-amp battery Rating | 12 V 7.5-amp battery Rating |
Type of Battery | Lithium-ion | Lead Acid |
Physical Dimension | 200 x 100 x 125 in mm | 151 x 65x 94 in mm |
No. of Battery | 1 | 1 |
Voltage | 36v | 12v |
Amp-hour rating | 15 Ah | 7.5 Ah |
Weight | 3.5 kg | 2 kg |
Recharging time | 3hrs | 45 mins |
Specifications of Batteries
Department of Automobile Engineering
11
BLDU Hub Motor
The BLDC hub motor is a conventional DC motor. The rotor is outside the stator coil with the permanent magnets mounted on the inside. The stator is mounted and static onto the axle and the hub will be made to rotate by alternating currents supplied through batteries. BLDC Hub motor generates high torque at low speed, which is highly efficient and which doesn’t need sprockets, brackets, and drive chains. This means they are very consistent and have an extended life. The main characteristic of Brushless D.C. Machines is that they may be controlled to give varied constant power speed ranges.
Parameters | Rating |
Power | 350 watts |
Current | 15 A |
Speed | 2000rpm |
Voltage | 36 V |
Specifications of BLDC hub motor
BLDC hub motor
Department of Automobile Engineering
12
Motor Controller
The motor controller is a central component of the system. It is important to control the amount of power supplied and to drive the BLDC hub motor. The controller converts the DC voltage from battery to an alternating voltage with variable amplitude and frequency that drive the hub motor at different speeds. It basically involves of MOSFET electronic transistor and small microprocessor that vary from detection any errors with the motor hall sensors, the throttle, to protect functions against excessive current and under-voltage, which are ideal for protecting the system.
Parameters | Rating |
System Voltage (V) | 36 |
Max. Load Output Current | 37 |
Rated Power | 350W |
Current Limit | 15 A ±1 |
Ambient Temperature (°C) | 0-50 |
Weight(gm) | 180 |
Dimensions (l × w ×h) (mm) | 130×88×39 |
Specifications of Motor Controller
hub motor controller
Department of Automobile Engineering
13
Throttle
The maximum speed of E-Bike is 25 kmph. It is required to differ the speed depending upon the road environments & traffic. Throttle is used to accelerate the E-Bike and maintain the speed of the vehicle. The throttle allows us to drive the motor from zero speed to maximum speed. Whenever the throttle is an action, at that time throttle is a transformed signal and the signal is supplied to the motor controller. Motor Controller is supplied a signal to the BLDC hub motor, and the motor starts acceleration.
Parameters | Rating |
Supply Voltage (V) | 36 |
Return Voltage (V) | 5 |
Max. load output current (A) | 37 |
Handle Bar Diameter(mm) | 22 |
Three wires red, green, black | May differ from works. Fits for 24v supply |
Specifications of Throttle
throttle/accelerator
Department of Automobile Engineering
14
Solar panel and Dynamo Generator
The semi flexible solar panel and dynamo generator are used for alternate source to recharge 36 V 15 Ah Li-ion battery and 12 V lead acid battery respectively. The Li-ion battery is charged with solar energy with the help of a solar cell. Solar cells convert the energy of sunlight directly into electricity through the use of the photovoltaic effect which is mounted on the roof frame of E-bike. The photovoltaic effect involves the making of a voltage into an electro-magnetic radiation. The Lead acid battery is charged when the vehicle is running, the dynamo generator is attached to the rear frame with the help of sprocket and chain drive linked to the rear wheel, the action converts the mechanical energy of the rotation to an electric current
Parameters | Rating |
Solar Panel Type | Flexible |
Wattage (Wp) | 20W |
Operating (Nominal) Voltage | 12V |
Number of cells | 60 cells |
Open Circuit Voltage (Voc) | 21 V |
Short Circuit Current (Isc) | 4.90 A |
Dimensions | 60 x 0.1 x 35 Centimetres |
Parameters | Rating |
Motor Voltage | 12V |
Speed | 1000-2000 RPM |
Cooling | Air –cooled |
Weight | 80 g |
Specifications of solar cell
Specifications of Dynamo Generator
Department of Automobile Engineering
15
Braking system
The E-Bike used disc brakes on front wheel which can be locked as desired. The front disc rotor is controlled by a right-hand brake lever which can lock the front disc to prevent any skidding or slip. This also prevents the toppling of the E-Bike.
front disc brake
Suspension system
The E-Bike has a dual shocker suspension at the rear end. The rear suspension system makes it a vehicle with proper handling and braking. The rear suspension has a maximum deflection of 4 inches which keeps the motor mounted in the rear part of the E-Bike shock free and intact.
suspension
Department of Automobile Engineering
16
Wheels
Spoke wheel rims are selected to bend, flex and handle impacts to a certain degree, letting tackle rough terrains with ease. The total size of the wheel is 500mm in diameter. The thickness of the tire is 50mm. Wet-type tires are used for good contact covering, in rainy conditions, Puncture resistant (up to 30 km), Long life (up to 5000 km), Durability, Less weight Good Commuting purpose.
front wheel and rear wheel
Type of tyre | Wet/rain |
Tyres manufacturer | HARTEX |
Tyres front size | 16-inch x 2.125-inch |
Rear tyre size | 16-inch x 2.125-inch |
Tyre design for bikes | E-Bike |
Specifications of tyre
Department of Automobile Engineering
17
Accessories
Accessories like LED headlight, taillights, horn, Wall-mounted rider seat, footrest, side stand, and polycarbonate windscreen. LED Headlight &Brake light and Bike side indicator switch, 4led indicators are fixed 2 at the front and 2 at back, protects the bike from any side collision on turns, waterproof and dustproof overall casing with clips for alteration free lights on all-terrains. Helps us to be safe with its bright light in any weather conditions
LED headlight, side indicators and brake light
The proper footrest is attached for better balancing and Wall-mounted seating is provided for comfortable sitting riding manoeuvrability for the rider. Used polycarbonate sheet for windscreen as view glass for weather protection and protects sheets by storing away from direct sunlight, moisture, and adverse chemicals.
wall-mounted rider seat
side stand
footrest
Department of Automobile Engineering
18
Used polycarbonate sheet for windscreen as view glass for weather protection and protects sheets by storing away from direct sunlight, moisture, and adverse chemicals. A kill switch for an emergency stoppage to cut the power supply is provided. 1 mm mild steel sheet metal was designed through laser cutting for covering the base. It is designed in a way that can be removed for future wiring reference. Metallic putty was done fully to the bike frame before the painting process. One coat of primer is done, next two coat of metallic coat has been done on the frame. Overall design and development of E-Bike frame in solid works modelling software’s and in reality, practical prototype Semi enclosed E-Bike.
E-bike handle with electronic switch’s, Motor controller display and horn.
Department of Automobile Engineering
19
DESIGN
Conceptual Design Phase:
Desired something other than the traditional two-wheel bike the market was currently offering. Our team proposed a design, differing it has an innovative tadpole recumbent design which is aerodynamic, ergonomically designed so that it can be used for travelling far areas.
Phase I Design
Inspirational Design
Conceptual Designs
Department of Automobile Engineering
20
CAD MODELING
3-D frame design is being made in Solid Works.
frame Dimensions
frame 3D Views
Department of Automobile Engineering
21
Analysis
Impact Test
The impact test is a process to resolve the toughness of the frame of the material under varying loading conditions. The main concept is to test the strength of the materials of the frame. During impact loads, the material absorbs a certain amount of energy. If the absorbed energy exceeds the minimum limit of the material, then breaking takes place. Thus, the amount of energy that material might absorb can be determined. Material toughness basically determines the amount of the energy that could be rivetted, if this exceeds then breakage occurs.
With the aid of Computer-Aided Engineering (CAE), the results of stresses been found out using Ansys 2021 R2 software has been displayed below.
The frame has been tested for stress-induced and deformation during
Department of Automobile Engineering
22
Front Impact Test
Results of Ansys for Front Impact Test
Department of Automobile Engineering
23
Side Impact Test
Results of Ansys for Side Impact Test
Department of Automobile Engineering
24
Rear Impact Test
Results of Ansys for Rear Impact Test
Department of Automobile Engineering
25
Rollover Impact Test
Results of Ansys for Rollover Impact Test
Department of Automobile Engineering
26
Torsional Test
The torsional test is done in a direction to stop Torsional fatigue failure. Torsional Test is conducted in analyses in order to find out the performance of the structure when a twist or torsional force is act on behalf of upon if a load is transferred from suspension to the frame. Determination of the strength and rigidity of the material to endure the loads is mandatory. Torsion test is used to measure the torsional strength, stiffness, and stress-strain properties of the frame and to determine if there are any distortions in the frame. A vehicle traveling in an uneven ground atmosphere causes frame deflection which are induced due to the load transfer from the suspension of the vehicles. Torsional stiffness plays a significant role in these torsion tests.
Results of Ansys for Torsional Test
Department of Automobile Engineering
27
Analysis | Load | Stress (MPa) | Deformation (mm) | FOS |
Front Impact | 1G | 38.82 | 0.66 | 2.22 |
Side Impact | 1G | 61.46 | 1.41 | 1.40 |
Rear Impact | 1G | 56.4 | 1.24 | 1.52 |
Roll Over Impact | 1G | 46.76 | 1.09 | 1.84 |
Torsional | 1G | 37.16 | 0.49 | 2.31 |
Values taken from results of Analysis Test
Note: The analysis which is been done has a life of 1e6 number of cycles (infinite life).
Department of Automobile Engineering
28
FABRICATION
SEMI-ENCLOSED E-BIKE UNIT
Semi-Enclosed E-bike unit consists of the following components – frame, wheel assembly, steering system, and electrical unit.
Semi-enclosed E-bike frame
Base Frame
Department of Automobile Engineering
29
WHEEL ASSEMBLY
The wheel assembly includes the fabrication of the front wheel and rear wheel and associated supports. The rear wheel is built with a BLDC hub motor. The intermediate sprocket is fitted on the same bolt as the rear-wheel using nuts. A lengthy piece of mild steel is attached to the middle of the front portion of the mainframe. The front-wheel assemblage is attached to this extended part. Front-wheel is made to rotate freely wheel.
Wheel Assembly
Department of Automobile Engineering
30
ELECTRICAL UNIT
The electrical unit consists of following components – Motor, controller, throttle, and battery and other electronic accessories.
block diagram of 36 V 15 Ah Li-ion circuit battery
block diagram of 12 V lead acid circuit battery
front view of prototype
31
Fabricated model of E-Bike
prototype side view
Department of Automobile Engineering
32
ORIGINALITY
INNOVATION / new idea / concept / technique that can be highlighted in your project
In order to solve the objective of this project we designed and developed E-bike (Trail & Error method). By designing the vehicle, it starts with the concept based modelling and works through the optimizing process in the straight direction to arrive at the Final product design specification. During the process, vital information about the design concept and manufacturing methods is discovered. The process of Trail and error method begins by gaining dimensional information of the object.
In this project inspiration was taken from XYN electric bicycle which is a conceptual design.
Department of Automobile Engineering
33
RESULTS AND FINDINGS
Speed measurement
As a transport for the people the overall safety, stability, reliability, control, comforts etc. are a very much important and taken in to consideration while designing it. Here we considered a total weight of the E-Bike is 150 kg including person.
Drive | Hub Motor |
Weight of Vehicle | 80 kg |
Riders Weight | 70 kg |
Load Capacity | 150 kg |
Size | 2400 x 500x 1800 mm |
Specifications of E-Bike
We have used the android application to measurement the speed of the E-Bike. Maximum speed, minimum
speed, and average speed are measured by this application. We have considered one place in rial run.
Trip | Distance | Time Taken | Average Speed | Maximum Speed |
Kolathur to Padi | 5 km | 20 min | 12kmph | 25kmph |
Results of the trail run
Department of Automobile Engineering
34
CONCLUSION
Department of Automobile Engineering
35
What percentage of work was completed as per the original plan at the submission of project report?
Before the start of project planning is done accordingly, Hence we achieved our aim in a stipulated time and can say truly 100% completion of project is done and Submission to our project panel is done intime.
Department of Automobile Engineering
36
State the contribution made by the individual team members
Oruganti Sairam
Vasu Desai Rao. D
Literature review, Task management, Design of Frame using CAD software's, Communication, Fabrication of E-Bike, Testing of E-bike, Documentation( table & graphs)
Literature review, Planning, Methodology of electric system to this e-bike. Selection of Battery, Motor Controller Circuitry, solar panel, dynamo generator and Calculations of powertrain of e-bike, Testing of e-bike, Report.
Pranav Sethi
Literature review, Group lead, Conceptual Design of E-bike, Coordinating team, Material selection, Analysis of Frame, Fabrication of E-Bike, testing process, Report, PowerPoint presentation
Department of Automobile Engineering
37
% of work done using SRM Facilities (name the laboratories/centers)
% of work done using external facilities (Specify the facilities)
Due to covid we couldn’t travel many times for fabrication in college, no laboratories and centres were used for this project.
This project was completely software based and fabrication project. So more than one software were used like
Fabrication is done in known garage.(Oruganti Sairam)
Department of Automobile Engineering
38
Challenges faced during the execution of the project and how it was resolved
Department of Automobile Engineering
39
Due to unexpected lockdown and based on the advice of your guide, what are the modifications / deviations you did in order to shape the project work to completion
40