1 of 12

Go to “FILE” and “MAKE A COPY

Print the pages double sided and staple along the centerline. Make sure the cover/back page is on top of the stack so your staple’s tips are on the inside.

Line up the papers and either roll one side in a little between the plates, own a big stapler or if your stapler can go flat, place it against cardboard, pull if free of the cardboard and bend the staples into place.

BACK

FRONT

More of my stuff here

Pick a back cover and a front cover for the character sheet

Here are some links to some fallout stuff

https://www.artstation.com/artwork/klWyy0

https://imgur.com/a/3Lghw/all

Some I’ve collected/made

Chosen pictures for the front and back on this page, line them up with the boxes on this page.

The last page will also ask that you pick either the robot character sheet or the human one along with the correct hit locations box.

Pick the one you want and maybe a character picture before you print it.

2 of 12

3 of 12

4 of 12

5 of 12

6 of 12

7 of 12

8 of 12

9 of 12

10 of 12

11 of 12

12 of 12

Follow these steps

  1. Pick the character sheet you want and center it.
    1. Followers, robots and humanoids have slightly different ones.
  2. Pick the origin/Hit location for your character here and center it over the character sheet.
    • Each origin has a slightly different set up & some examples are already made. (download it and go to “insert” & “image”)
  3. Pick a picture for your character online or here if you don't want a pre-made one.

Robots

Humanoids

Followers