Emergency Braking Warning System for car

Most vehicles are indicated deceleration by brake lights , without being able to distinguish between regular brake" or "emergency brake". In the event of an emergency situation , driver can only turn on the warning light manually to alert the drivers behind. However, by the time the driver completes this action, several seconds have already passed.

According to research findings, at a speed of 80 kilometers per hour, every one-second delay in braking can result in an additional 22.2 meters of distance, increasing the likelihood of rear-end collisions.

Installing a warning system that can "proactively" and “immediately" alert other drivers there is emergency situation in front of them so as to reduce accidents

Emergency warning devices are not all original cars equipment

have

none

• When the inertia of the brake is applied and the deceleration is >0.42 /G (about 14km/h in 1 second), the dynamic brake warning device will be activated immediately (for 6 seconds).
• Install with the switch of danger warning light.

The warning light is like the original one

Fully comply with the vehicle lighting.

Without Emergency Braking System

General braking status

With Emergency Braking System

Emergency braking status

Emergency braking signal

When the inertia of the brake is applied and the deceleration is >0.42 /G (about 14km/h in 1 second), the dynamic brake warning device will be activated immediately (for 6 seconds)

Reference：Youtube EBS 智慧型緊急煞車警示系統 | TOYOTA

None invasive installation.

The control box is combined with switch of danger warning light.

Control box

THANK YOU