Test Report (tb16000 22-3Li-ion with valve)

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Test to perform

确保电池是干燥的，并确保电池和电池壳不会有相对运动，即电池在电池壳内是固定的，不会晃动； Make sure the battery is dry before shipping，and Ensure that there is no relative movement between the battery and the battery case; 电池要做防水防爆测试，不防水防爆的不OK; We should do the waterproof test of battery, and the battery must not be leaking; We should do the explosion-proof test of battery, and the battery must not be explosion.

检查各部件外观是否良好，无外观瑕疵合格; Check the appearance of each component is good, no appearance defects qualified; 检查螺丝是否完整，不能有螺丝遗漏情况; Check the screws are intact, ensure no screws were missing on the Grinder;

检查电池接头方向，小针孔朝内; Check the direction of the battery connector, the small pinhole facing inward;

反复打开/锁紧电池，确保每一次操作都比较轻松; Open and close the battery lock mechanism. It should be easy to open and close without too much force;

电池能够正常充放电，且出货时电池电量为21.5V- 22.5V; The battery can be charged and discharged normally, and the battery power is 21.5V-22.5V when shipped;

Other:

By *

Comments (Not Mandatory)

Submit

Clear form

Never submit passwords through Google Forms.

This form was created inside of NemoPowerTools.

Does this form look suspicious? Report

Forms