IMCA label No. or IMCA measurer No. or IHC serial No.
Your answer
Mainsail Sailmaker *
Your answer
Jib Label *
IMCA label No. or IMCA measurer No. or IHC serial No.
Your answer
Jib Sailmaker *
Your answer
Spinnaker-1 Label *
IMCA label No. or IMCA measurer No. or IHC serial No.
Your answer
Spinnaker-1 Sailmaker *
Your answer
Spinnaker-2 Label *
IMCA label No. or IMCA measurer No. or IHC serial No.
Your answer
Spinnaker-2 Sailmaker *
Your answer
Personal Flotation Device *
C 3.1 (a) The boat is equipped with personal buoyancy for each crew member to the minimum standard ISO12402:5 (CE 50 Newtons), or USCG Type III, or AUS PFD 1
Required
Bilge or Bailer *
C 5.1 (a) (1) One manual bilge pump or bailer minimum of 1 liter
Required
Bucket with lanyard *
C 5.1 (2) One bucket of not less than 9 liter capacity, with a lanyard of minimum 1 meter.
Required
Anchor and chain *
C 5.1 (3) One anchor and chain combined of not less than 5 [kg] in weight and with the anchor of not less than 3.1 [kg]
Required
Anchor line *
C 5.1 (4) One anchor line of not less than 40 [m] of length and not less than 8 [mm] in diameter
Required
Hatches *
C 5.1 (5) Two main companionway hatches
Required
Engine tray *
C 5.1 (6) The engine tray carried under the engine.
Required
Engine and bracket *
C 5.2 (1) One functioning outboard engine and bracket
Required
Engine model *
Your answer
Engine Serial No *
Your answer
Engine Weight *
Minimum engine weight empty of fuel – 12.5 [kg]
Required
Fuel canister/Battery pack *
C 5.2 (3) The boat shall depart the dockside with the engine tank full and suitable separate container with a minimum 3 litres of fuel or in the case of an electric outboard the battery power pack fully charged.
Required
Corrector Weights *
C 6.2 (a) Corrector weights of lead shall be equally divided fore and aft and permanently fastened in the locations on the diagram in section H when the boat weight is less than the minimum requirement
Required
Amount of Corrector Weights *
C 6.2 (b) In Kilograms. The total weight of such corrector weights shall not exceed 20 [kg] (if answer on above question is "NO" please enter 0)
Your answer
Keel Locking Strap *
C 8.2 (b) (1) The keel shall be fixed down using the supplied locking strap