ARM Polyamide (Nylon) Data
Use this form to enter Polyamide (Nylon) grades.
Email address *
Company *
Your answer
Grade Name *
Your answer
Repeat Unit / Nomenclature *
(eg 6, 11, 12)
Your answer
Density *
Units: g/cc. Test Procedures: ASTM D1505, ASTM D4883, ASTM D792. Specimen Details: Compression molded.
Your answer
Melt Index *
Units: g/10min. Test Procedures: ASTM D1238. Test Conditions: 2.16 kg, 230°C Specimen Details: pellets or powder.
Your answer
Flexural Modulus *
Units: psi. Test Procedures: ASTM D790. Test Conditions: @ 1% strain, 1/8" thickness. Specimen Details: rotationally molded.
Your answer
Tensile Strength @ Yield *
Units: psi. Test Procedures: ASTM D638. Test Conditions: Type IV specimen 2”/min crosshead speed 1/8” thickness. Specimen Details: rotationally molded.
Your answer
Heat Distortion Temperature 66 psi *
Units: °C Test Procedures: ASTM D648. Test Conditions: 66 psi, 1/8” thickness. Specimen Details: rotationally molded.
Your answer
Heat Distortion Temperature 264 psi *
Units: °C Test Procedures: ASTM D648. Test Conditions: 264 psi, 1/8” thickness. Specimen Details: rotationally molded.
Your answer
Impact Strength 1/8” thickness *
Units: ft lbs Test Procedures: ARM Procedure. Test Conditions: 23°C, 1/8” thickness (using 10# dart) Specimen Details: rotationally molded.
Your answer
Impact Strength 1/4” thickness
Units: ft lbs Test Procedures: ARM Procedure. Test Conditions: 23°C, 1/4” thickness (using 20# dart) Specimen Details: rotationally molded.
Your answer
Meets FDA Requirements? *
UV Stabilized? *
Confirm all relevant samples taken from the same rotomolded part? *
PIAT (°F) at which rotomolded sample was produced
Your answer
A copy of your responses will be emailed to the address you provided.
Submit
Never submit passwords through Google Forms.
reCAPTCHA
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Additional Terms