Chudi Measurement Form - Fashion Dot Technologies
Simply Enter Your Chudi Measurements, we will Send you the Computerized Drawing For your Measurement. you can take the printout and can stitch your dress. MAIL DRAWING IS FREE.
Name -
Your answer
Mail Address -
To This Mail Id your Measurement drawing Will Be Sent to you.
Your answer
Contact No -
Your answer
City / State:
Your answer
1. Height -
First correct the customer chudi without any wrinkles and let them to stand straight, then take the measurement. Height measurements should be taken in the customer's front side directly from top shoulder till to their knee height this is for short chudi and add 3'' with the height for normal chudi. Height will be change according to the customer's requirements. While Taking Height don't leave any folding seam or stitching seam; only finishing Measurement should be taken.
Captionless Image
Your answer
2. Front Point Center -
This measurement should be taken from the front side from the top of the shoulder to their front point center, this measurement should be very accurate.
Captionless Image
Your answer
3. Body Loose -
Body loose measurements should be taken from point center circumference without any tight or loose for correct fitting. We need the finishing loose. Avoid measurement .25'',.5'',.75''.
Captionless Image
Your answer
4. Waist Loose -
Waist loose measurement should be taken from the customer waist side where they wear the blouse last hook and it should be taken as the correct measurement.
Captionless Image
Your answer
5. 1st Low Hip Height -
First Low Hip height measurement should be taken from the top shoulder till to their stomach part.
Captionless Image
Your answer
6. 1st Low Hip Loose -
First Low Hip loose measurement should be taken in the circumference of customer stomach part and it should be taken without any tight or loose for correct fitting.
Captionless Image
Your answer
7. Side Open From Top -
Side open from top measurement should be taken from the height fro, shoulder to their seat loose. The open measurements various to the customer's choice.
Captionless Image
Your answer
8. 2nd Low Hip Loose
Second low hip loose measurement should be taken from the customer seat circumference and it should be taken without any tight or loose for correct fitting.
Captionless Image
Your answer
9. Front Neck Height -
Front neck height measurement should be taken from the front shoulder center towards down.
Captionless Image
Your answer
10. Back Neck Height -
Back neck height measurement should be taken from the back shoulder center towards down. Tape should not be taken cross, it should taken straight.
Captionless Image
Your answer
11. Sleeve Height -
Sleeve height measurement should be taken from the shoulder finishing end portion towards down the customer required height. This measurement should not leave for any folding or stitching seam.
Captionless Image
Your answer
12. Hand Loose -
Hand loose measurement should be taken from where we taken end of hand height in the same position end circumference should take. Tape should not be free or tight. Measurement should not be in .25,.75 like 14.25 or 3.75. It should be in .5,like 12.5, 13,13.5,14,14.5…
Captionless Image
Your answer
13. Middle Hand Loose -
Middle hand loose measurement should be taken from in the under arm position round. Tape should keep in the under arm of the customer and set their hands in normal downward position, now measure their middle hand circumference without any tight or loose.
Captionless Image
Your answer
14. Shoulder Finishing
Shoulder finishing is not meant full shoulder measurement, it should be taken from sleeve joint portion (shoulder bone) toward next side, depends on their neck. If customer needs broad or wide neck ,shoulder finishing should be reduced. It will not exceed 2 or 3.5''.
Captionless Image
Your answer
Required Model
Your answer
Do you Need The Drawing in Courier
Some Customers, are Requesting to sent the Paper Drawing as Courier. So this option is Enabled. If You required this Drawing in Courier, the Courier Charges will rs.100 for 2 sizes, Rs.200 for 5 Sizes. Yo can Make this payment through PAYTM or call us at 8220047152, 8220047154 To Get the company Account No. and You v=can make the Payment. HENCE THE DRAWING SENT TO YOUR MAIL WILL BE FREE OF COST ONLY.
Captionless Image
ADDRESS
If the Paper Drawing Should be Sent Through Courier, Enter Your Address- with your Postal Pincode and Mobile Number.
Your answer
Interested For:
Submit
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Additional Terms