Safety Quiz
Email address *
What is your name? *
1. Any dangerous condition in the shop must be reported to the teacher: *
1 point
2. When you enter another shop, you must' report to the teacher: *
1 point
3. Guards and other safety devices are for your protection; always:
1 point
Clear selection
Rags soaked with oil, pain, thinner, or flammable liquids must be placed in:
1 point
Clear selection
Gasoline, paints, kerosene, and other flammable liquids are never to be used near:
1 point
Clear selection
Disturbing another student while they are working is:
1 point
Clear selection
Caution another student if you see a violation of:
1 point
Clear selection
When working with hand or power tools, loose clothing and jewelry must be:
1 point
Clear selection
In case of injury, report at once to the:
1 point
Clear selection
10. If equipment does not work properly, shut off the machine and inform the:
1 point
Clear selection
11. Damage to shop equipment and tools must be reported to the teacher:
1 point
Clear selection
Lifting heavy objects can cause injury, if an object is too heavy:
1 point
Clear selection
The proper manner to move about the workshop is:
1 point
Clear selection
The recommended footwear is:
1 point
Clear selection
15. If you have questions about any job or operation, you must ask the:
1 point
Clear selection
Machinery may be operated only by a student who has passed his/her safety test and received permission from the:
1 point
Clear selection
Rivets, washers, and other foreign materials should not be placed in:
1 point
Types of behaviour not permitted include
1 point
Before touching electrical switches, plugs, or receptacles, hands must be completely:
1 point
While working in the metal shop, eye protection must be worn:
1 point
Clear selection
A stream of compressed air must never come in contact with:
1 point
Clear selection
The main power switch should only be turned ON only by the:
0 points
Clear selection
Fires involving electrical equipment should be extinguished with:
1 point
Clear selection
When extinguishing flammable liquids, the best type of extinguisher to use is:
1 point
Clear selection
In order to extinguish or stop a fire quickly, you must know which of the following about the fire extinguishers present in the shop:
1 point
Spilled flammable liquids are a fire hazard and must always be:
1 point
Clear selection
Hazardous chemicals are dangerous to the environment. Always dispose of them by:
1 point
Clear selection
Dizziness,headaches or sickness can all be signs of toxic chemical exposure caused by:
0 points
Clear selection
Be careful when disposing of chemicals, if mixed together, they may cause
1 point
Clear selection
A chemical container label should always list the following:
1 point
Clear selection
Do not carry sharp or pointed tools and materials in your clothing. Hold sharp points or edges:
1 point
Clear selection
Whenever possible, the motion involved in striking objects or cutting materials should be done:
0 points
Clear selection
When using a chisel, you should
1 point
Clear selection
Files should be kept clean to avoid
1 point
Clear selection
Before using a hammer, check the:
1 point
Clear selection
If the Wrench is too small, it is best to:
1 point
Clear selection
Scratch awls are used for:
1 point
Clear selection
Chips, shavings and shards should be cleaned from the benches
1 point
Clear selection
when operating revolving equipment, all jewelry, gloves, and loose clothing must be
1 point
Clear selection
As the drill goes through the material, the pressure must be
1 point
Clear selection
Work to be drilled should be securely held by
1 point
Clear selection
You should not use the grinder if the tool rest is away from the wheel more than:
1 point
Clear selection
When buffing, material must be held:
1 point
Clear selection
Items of clothing must be adjusted so that moving parts of the lathe will not:
1 point
Clear selection
After using the chuck wrench, you should:
1 point
Clear selection
Before using the lathe, make sure that all spinning parts of the lathe will not hit the compound slide during:
1 point
Clear selection
When you leave the lathe, make sure that all spinning parts of the lathe will not hit the compound side during:
1 point
Clear selection
When you leave the lathe, you
1 point
Clear selection
Measuring the work and adjusting, cleaning, or oiling the lathe should be done only:
1 point
Clear selection
Cuts near the chuck or a shoulder should be done:
1 point
Clear selection
When polishing revolving work, the ends of the abrasive cloth should be held
1 point
Clear selection
Chips should be cleaned from the lathe with
1 point
Clear selection
To avoid injury to your hands, you must remember that milling cutters are:
1 point
Clear selection
Revolving milling cutters are especially dangerous. When the cutter is turning, the operator must:
1 point
Clear selection
When using the horizontal or vertical milling machine, it is important to select the correct feed, speed, and direction to prevent:
1 point
Clear selection
To loosen the milling machine arbor nut, you should:
1 point
Clear selection
Rapidly rotating end mills, if used incorrectly, will:
1 point
Clear selection
The blade should be moving before touching the work on the stock; this:
1 point
Clear selection
When the saw is running the operator should
1 point
Clear selection
It is best to set the upper saw guide of the band saw with:
1 point
Clear selection
When it becomes necessary to back out of a saw cut you should:
1 point
Clear selection
Care must be used in cutting arcs or curves so that:
1 point
Clear selection
The abrasive saw must be treated with care because it:
1 point
Clear selection
If the blade binds or gets stuck in the work you should
1 point
Clear selection
Anyone welding, brazing, or watching the flame must wear
1 point
Clear selection
Oil should not be used around welding equipment due to the danger of
1 point
Clear selection
If the skin is exposed to the electric arc, it will be
1 point
Clear selection
When chipping slag you must wear suitable eye and body protection to guard against
1 point
Clear selection
When operating the squaring shear, use only one foot to move the treadle and keep the other foot:
1 point
Clear selection
When using the shear, you should keep your hands:
1 point
Clear selection
A copy of your responses will be emailed to the address you provided.
Submit
Never submit passwords through Google Forms.
reCAPTCHA
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy