General Safety Test
Please choose the best answer with regards to safety.
Email address *
Last Name *
Your answer
First Name *
Your answer
1. When must all adjusting of a machine's blade take place? *
1 point
2. What should you always do before climbing a scaffold? *
1 point
3. Where should you stand when starting a machine? *
1 point
4. What should you do with scraps after you are done making a cut with a saw? *
1 point
5. Why must you never attract anyone's attention while they are operating a machine? *
1 point
6. What must you do to earn the right to operate any of the power tools in the shop? *
1 point
7. When is it ok for you to use a tool for something other than its intended use? *
1 point
8. When should you not operate a power tool? *
1 point
9. How is the blade or cutting tool on a machine stopped after the power is turned off? *
1 point
10. In the shop, long hair will only be allowed when it: *
1 point
11. What phrase should you remember at all times in the shop? *
1 point
12. When handling heavy or long objects and material, you should: *
1 point
13. Why should any liquid spilled on the floor be wiped up immediately? *
1 point
14. When do you leave a machine running and leave it for any period of time? *
1 point
15. To whom must all accidents be reported? *
1 point
16. Why should you not look around or carry on a conversation when using a power tool? *
1 point
17. When is throwing things in the shop permissible? *
1 point
18. Why is it important for all stock to be properly supported? *
1 point
19. All hand tools and foreign material must be removed from the machine: *
1 point
20. When are you permitted to use a machine with the instructor out of the room? *
1 point
21. Why should you never carry a power tool by the cord? *
1 point
22. What should you do when a machine does not operate properly? *
1 point
23. What is the "Safety Zone" of any machine? *
1 point
24. When should you report an unsafe situation to the instructor? *
1 point
25. At what speed should a machine be running before you start cutting stock? *
1 point
26. Why must safety guards always be kept in place while the machine is running? *
1 point
27. Who should remove a special set-up on a machine after it is used? *
1 point
28. Who has precedence over all other action in the shop? *
1 point
29. Why should you never start or stop a machine for another person? *
1 point
30. Before changing a blade or cutting too, you must: *
1 point
31. When there is a substitute teacher, you are allowed to use machines only if: *
1 point
32. When is "horse play" ever allowed to take place in the shop? *
1 point
33. When is it OK fro you to leave a tool or hardware on a ladder or scaffold? *
1 point
34. What must be done about loose clothing, neckties, long sleeves, and loose aprons when you are working in the shop? *
1 point
35. You should use suitable eye protection: *
1 point
36. Why should you securely fasten all adjustment knobs, screws, fences, and tilting devices before turning on the power? *
1 point
Submit
Never submit passwords through Google Forms.
reCAPTCHA
This form was created inside of Jefferson County Public Schools. Report Abuse - Terms of Service