Bench Tool Safety quiz

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Email *

the Drill press does not require safety glasses because its speed can be adjusted *

5 points

False

True

check all basic usage safety instructions for the CNC router table *

5 points

turn on /plug in the spindle water coolant

wear sandals to keep your feet cool

secure the part to be cut so that it CANNOT move

test your program to ensure the machine does crash

wear safety glasses

turn on the coolant and air pressure for the cutting tip thats being used.

Required

horseplay around benchtop tool (drill press,cnc,lathe) is okay because robotics is about having fun *

5 points

true

false

how do we hold materials when we are using in the Bench Grinder? *

5 points

jam materials into the top opf the grinding wheel with lots of force and jerk it around

lay materials onto the hand rest and gently push the material in with just enough force to sand the edges

where is the stop switch on the horizontal band saw? *

5 points

near the motor

on the back

near the front where you lift the head, press the switch DOWN to disable.

Check all Shop tools that is it dangerous to have Loose sleeves, long hair, hoodie strings or anything that can catch when in operation. even if its another person operating it. *

5 points

Drill press

CNC Router Table

Bench Grinder

Chop Saw / Mitre saw

Belt Sander

Thunder Laser

Lathe

horizontal Band saw

Required

where is the emergency stop button on the drill press? *

5 points

Left side

Right side

Top side underneath the lid

on the front, with no covers very easy to press quickly

mark all the basic usage instructions for using the thunder laser *

5 points

turn on the laser cooler to prevent overheating the laser

ensure the exhaust fan is on for venting out smoke

make sure the laser lenses are clear so they dont build up heat and melt

make sure the pressurized air is enabled to prevent flame ups when the laser is cutting

wear steel toes shoes

Required

the chop saw /mitre saw is always dangerous because it has no safety features and a button press spins up the 15" saw blade. *

5 points

true, the chop saw is unsafe because it was designed with professionals in mind

false, chop saws are for children so it has lots of safety features built in

when using the CNC router table it is safe to walk away while it runs a program? *

5 points

True

False

can operators leave the "chuck" in the lathe when operating it? *

5 points

true, it will just spin around

false, it will fly off or jam the machine

where is the Emergency stop located on the thunder laser? *

5 points

Bottom side

Left side

Right side

Top side

where is the emergency stop button on the Lathe? *

5 points

in the cabinet below

on the front near the knobs

at the top by pressing the big red button

where is the belt sander shut off switch *

5 points

down low on the front, pulling the switch towards you disables the machine

under the belt.

when using the chop saw, it cuts so fast that clamping material is not needed. *

5 points

true, it cuts so fast how could anything go wrong?

false, any object to be cut must be completly secure before attempting to make any cut.

what safety equipment is needed when the thunder laser has its lid or side panels open? *

5 points

Hair tied back

Laser blocking safety glasses

normal safety glasses

steel toed boots

when the drill press has lots of metal shaving spinning from the drill bit its best to let them fling off instead of stopping the machine and clearing it by hand. *

5 points

True

False

how do we hold materials when we are using in the belt sander? *

5 points

jam materials into the sander with lots of force and jerk it around

lay materials onto the rest and gently push the material in with just enough force to sand the edges

Where is the Emergency stop located on the CNC router table? *

5 points

on the spindle head near the cutting tool

mounted on the side of the table

on the controller box at the end of the machine labelled E-Stop

when switching off a bench grinder you can walk away immediately *

5 points

true, its okay to let the grinding wheels spin down without supervision

false, the bench grinder has lots of built up speed that must be safely slowed down before walking away.

when using the Drill press you can hold the material to be drilled because you have a strong grip *

5 points

true, my grip is stronger than a 2hp motor

false, material to be drilled should be secured in a vice or clamp.

Submit

Clear form

This content is neither created nor endorsed by Google. - Terms of Service - Privacy Policy

Does this form look suspicious? Report

Forms