The Simple Checklist
Does your bolt fit within the GO-2 Socket's size range: 10mm to 20mm OR 3/8 to 3/4 inch? *
20 points
Does your bolt have a clear area around it so the GO-2 Socket has room to turn... a minimum diameter of 3 inches of turning clearance around the bolt head? *
20 points
Do you have enough "elbow room" to use pliers to tighten the GO-2 Socket... just in case your bolt requires extreme tightening of the socket? *
20 points
Is your bolt head so damaged that it's starting to look like a 'dome' instead of a normal bolt head? *
20 points
Is your bolt head super thin? *
20 points
Is the bolt "seized"? *
20 points
Did you know? If you purchase from us and things don't work out, we have a 45-Day Buy Back Guarantee. *
OK, We're Done! So... before you hit "Next" below, know that the closer you are to a score of 120, the greater your chances of success. OK, now click "Next" and on the following page click 'Submit'. (Note: After you hit "Next", you may have to scroll up a little bit...)
Submit
This content is neither created nor endorsed by Google.