Order Form for various Rigidbot upgrades by Peter Stoneham
This form is to simplify multiple orders - apologies for the discontinued items. You can also review and edit your order after you have submitted the form. Please refer to RigidWiki for full description of items. If you are only purchasing small robust items that can be flat packed into an standard envelope (one dimension no greater than 10mm) then the shipping cost will be around $3.50 - 4.50. Other items will be shipping via a bubble wrap envelope and will usually cost around $US12 - 15 depending on the number of items. There is No Tracking on either service as the tracked service from NZ Post is more than three times the cost. NZ Post estimates delivery in 5-10 working days but from experience some parcels take longer.
How many Dual V6 Mk8 Alloy Mount Kits would you like to order? (SOLD OUT - DISCONTINUED)
Kits cost $US38 and require assembly. Version 2 gets its own wiki entry and includes the height adjustment bar and three custom stainless linear bearing mounts. It is highly recommended that you also order the requisite X-axis Adjustable Timing Belt Idler and Dual Extruder PCB with on-board proximity sensor circuitry. Please see wiki for more details.
Your answer
How many Single V6 Mk8 Mount Kits would you like to order? NOT compatible with RB2 (SOLD OUT - DISCONTINUED)
Kits cost $US30 and require assembly. If you don't have the Stainless Linear Bearing Mounts you will need to order them below. It is highly recommended that you also order the requisite X-axis Adjustable Timing Belt Idler and Single Extruder PCB with on-board proximity sensor circuitry. Please see wiki for more details.
Your answer
How many Mk8 Hobbed Drive Gears would you like? (SOLD OUT - DISCONTINUED)
$2.50ea. After the stepper motor this is probably the most important part of the 3d printers direct drive extruder system. These are high quality Mk8 Hobbed Drive Gears specifically for 1.75mm filament. For after market extruders only.
Your answer
How many Dual Extruder PCB Kits would you like to order? (SOLD OUT - DISCONTINUED)
Kits cost $US16 and require assembly and soldering. A highly recommended add-on to the Dual V6 Mk8 Alloy Mount Kit. It supports an NPN NO 4mm sense distance Inductive or Capacitive Proximity Sensor.
Your answer
Dual Extruder PCB
How many Single Extruder PCB Kits would you like to order? NOT compatible with RB2. (SOLD OUT - DISCONTINUED)
Kits cost $US12 and require assembly and soldering. A highly recommended add-on to the Single V6 Mk8 Alloy Mount Kit. It supports an NPN NO 4mm sense distance Inductive or Capacitive Proximity Sensor.
Your answer
How many Series Connected Stepper Motor Splitter Boards would you like? Compatible with RB1 and RB2 (temporarily out of stock)
Kits cost $US5 each and require assembly and soldering.These adapter boards will split a single z-axis driver to power two z-axis stepper motors in series. It will substantially increase the torque on your z-axis. IMHO an essential upgrade for the Rigidbot controller and all other third party controllers. N.B.You only need one per Controller.
Your answer
Series Stepper Adapter Board
How many ByeBye board Kits would you like to order? NOT compatible with RB2
Kits cost $US12 and require assembly and soldering. This is a revised edition of Marvin Stuart's famous BYEBYE dual extruder breakout board. If you are upgrading to a 3rd party controller this is an essential piece of kit to deal with the print head and heated bed ribbon cables.
Your answer
ByeBye Board
How many Adjustable Timing Belt Idlers would you like? NOT compatible with RB2
Kit (one idler) costs $US14 and requires assembly. For accurate belt tension adjustment and smooth running. Two flanged idler bearings are an excellent match in diameter to 16 and 20 tooth timing pulleys. Also ducks under the heated bed PCB on Y-axis.
Your answer
Adjustable Timing Belt Idler
How many Stepper Motor Mounts would you like? NOT compatible with RB2 (SOLD OUT - DISCONTINUED)
Cost $US5.50 each or a set of four for $US20 (now includes four stainless M3x4 screws per mount). Rigid stainless steel alternative to plastic mount for X, Y and Z axis.
Your answer
Stepper Motor Mount
How many Stainless Linear Bearing Mounts would you like? NOT compatible with RB2
Cost $2.50 each (eight or more $2.25ea). More rigid than the plastic version and perfect for stiffening the z-axis. It also has its own wiki.
Your answer
How many Extruder Height Setting Arms would you like? (SOLD OUT - DISCONTINUED)
Cost $US3. The Height Setting Arm is an upgrade for the original Dual Alloy Mount. It allows you to fix the extruder levels so you can remove and replace the extruders without having to re-level. Only one is required per mount.
Your answer
What is your name please? *
Your answer
What is your email address please? *
This is the address that I will send a PayPal invoice to. When you make the payment be sure to include the correct postal address as this will be where I send the goods to.
Your answer
Anything else you would like to ask, add or explain regarding your order?
Your comments really make a difference especially if your order is not the run of the mill - it saves me second guessing whether you have ordered correctly or not.
Your answer
Submit
Never submit passwords through Google Forms.
This form was created inside of VirtuaLight. Report Abuse - Terms of Service