JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.
3D Printer Ultimaker Quiz Questions
Sign in to Google
to save your progress.
Learn more
* Indicates required question
Email
*
Your email
Name
*
Your name as on your Makespace membership
Your answer
Membership number
*
Your Makespace membership number. If you have not been issued with a membership number, please contact
admin@makespace.org
to get yours. Thank you.
Your answer
Which material(s) can be used in the ABS printers?
*
ABS
PLA
TPU
Required
Which material(s) can be used in the PLA printers?
*
ABS
PLA
TPU
Required
What size filament do our printers use?
*
1.75mm
2.85mm
5mm
0.4mm
Required
What size nozzle must you configure cura to use?
*
0.1mm
0.4mm
4mm
It doesn’t matter
Required
What will reducing the layer height do?
*
Improve the print quality
Required
How should makespace filament be stored?
*
With the loose end secured in through the small holes in the spool that match the filament diameter
In the correct box for the material type
In a humidity controlled box with both clips closed and the power lead connected
Required
How should you report a broken or faulty printer?
*
Raise a trouble ticket via the desktop shortcut on the computer
Put a sign on the printer
Required
If there is an accident:
*
Stop the equipment, use the first aid kit above the sink in the mainspace next to the big Makespace logo, use the phone to call 999 if needed, inform management in an email to
management@makespace.org
Tell the owners next time you see them
Only be concerned if you are bleeding
Note what happened and try to avoid doing that again in the future
Which part of the printer can reach temperatures of 260C and poses a burn hazard?
*
The heated bed
The nozzle
The power switch
The drive mechanism
Required
Which parts of the printer can reach temperatures of 100C and poses a burn hazard?
*
The heated bed
The nozzle
The power switch
The drive mechanism
Required
What materials/surface can you use to help your print stick to the bed on the PLA printers?
*
Purple glue stick
Hair spray
Engine oil
Clean printing bed
Required
What materials/surface can you use to help your print stick to the bed on the ABS printers?
*
Purple glue stick
Hair spray
Cheese
Clean printing bed
Required
Which of these jobs must only be done by an owner?
*
Bed levelling
Replace nozzle
Glass bed cleaning that requires the removal of the bed
Atomic/Cold Pulls to clear the nozzle
Required
How can you immediately cancel a print?
*
From the menu, Tune -> Abort
Remove the memory card
Turn off the printer
Required
Which types of material will you be able to print after completing this induction?
*
ABS
Nylon
PETG
PLA
Woodfill-PLA
TPU
Required
How hot can the extruder nozzle get?
80 °C
100 °C
180 °C
260 °C
340 °C
Clear selection
Which temperature is recommended for the build plate for printing ABS?
*
80 °C
100 °C
180 °C
260 °C
340 °C
Your PLA print's first layer isn't sticking to the bed. What can you do to fix this?
*
Level the bed using the appropriate function in the printer menu
Apply purple gluestick
Switch to a different printer
Clean the bed with isopropal alcohol wipes
Switch to a different filament
Increase the brim size
Apply hairspray to the printbed
Decrease the print speed
Required
What can you do to make print removal easier?
*
Remove print as soon as it completes so that the bed is still warm
Use a razorblade or similiar item to get under the print's edge
Once you have a gap at the edge use the removal tool to lever the part off the bed
Let the printer and part cool down before attempting removal
Remove the bed from the printer
None of the above
Required
A copy of your responses will be emailed to the address you provided.
Submit
Clear form
Never submit passwords through Google Forms.
reCAPTCHA
Privacy
Terms
This form was created inside of makespace.org.
Report Abuse
Forms
