KX 2nd L👀K Parts Kit Order

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

The full kit includes the parts to complete the project* but does not include required solder or optional case.
*4002 LCD display, Arduino Nano, Arduino Breakout Board, i2c (Digole) LCD serial interface, Header Pins (5), 2 Row Header
3.9 kΩ & 10 kΩ Resistor, Push Button Reset Switch, 3.5mm Stereo Jack, 4 M-F Jumpers for LCD and Connection Wires 6"

Please complete this form and you will then receive an email response within a day or so with your total cost and an address to pay via PayPal or send an USPS Money Order to complete your purchase. To keep shipping simple we are using flat rate boxes so one price no matter how much you order.

For more information visit- http://www.k8zt.com/2ndlook

Full Kit (with free bonus clear case) *

One (1) Full - KX 2nd L👀K Parts Kit + Clear Case - $55.00

One (1) Full - KX 2nd L👀K Parts Kit + Clear Case - Dayton Special $45.00 (Black on White or White on Black Display Only)

Two (2) Full - KX 2nd L👀K Parts Kit + Clear Case - Dayton Special $85.00 (Black on White or White on Black Display Only)

Two (2) Full - KX 2nd L👀K Parts Kits + 2 Clear Cases - $98.00

Three (3) Full - KX 2nd L👀K Parts Kits + 3 Clear Cases - $140.00

Parts Only (see below)

KX-QRP 2nd L👀K Parts Kit- Please note parts may vary slightly in appearance due to multiple parts suppliers.

Choose your LCD Display for above kit order (colors may vary slightly based on vendor stock) *

Black on Amber (not available with Dayton Special)

Option 6

Black on Yellow-Green (not available with Dayton Special)

Black on White

White on Black

No kit ordered

Other:

Accessories

3.5mm 90° M-M Interface Cable (~6") - $4.50

USB Cable for power (Mini B/ A) - $3.00

DB-9 Male Connector and Shell (to build cable for K3 only, you will also need a 3.5mm M plug and 3 conductor wire- not included)- $2.00

Extra Plastic Cases - NOTE-- no holes are cut or marked, you must do this yourself!

Clear - $4.00

Blue - $4.50

Yellow - $4.50

Orange - $4.50

Pink - $4.50

Green - $4.50 (currently out of stock)

Clear selection

Clear Case- Note these cases do not have any holes for kit. You need to cut your own holes. Clear cases have more robust hinges & clasps. Size ~19.3 x 5.7 x 3.0 cm (~7.7 x 2.25 x 1.2").

Color Cases- Note these cases do not have any holes for kit. You need to cut your own holes. Size ~21.5 x 6.5 x 3.5 cm (~8.3 x 2.3 x 1.3").

Extras & Parts Only shipping (bare parts no support is included)

LCD- 40 Character x 2 Rows with Backlight, Sunlight readable (Black on Amber)- $19.50

LCD- 40 Character x 2 Rows with Backlight, Sunlight readable (Black on Yellow-Green- $19.50

LCD- 40 Character x 2 Rows with Backlight, Sunlight readable (Black on White)- $19.50

LCD- 40 Character x 2 Rows with Backlight, Sunlight readable (white on Black)- $19.50

Digole i2c LCD Backpack with 8x2 pin arrangement for 40 x 2 LCDs - $12.50

Arduino Nano (unprogrammed) - $8.00

Arduino Breakout board- $7.00

Push Button- $2.00

KX2 & KX3 Accessories

5.5mm x 2.1mm 5.5/2.1 DC Power Male to Female Extension Cable w/ Switch (great for powering KX3 & PX3 from one feed) - $15.00

5.5mm x 2.1mm Male to Female DC Power Cable With Mini ATM Auto Fuse Holder - $8.00

12V Male Car Cigarette Lighter Socket Plug Connector On Off Switch (no connector)- $8.00

BNC Male Plug To Dual Binding Post Banana Plug Jack Female Coaxial Connector (great for antenna on KX3 or KX2, just add your own antenna and counterpoise wire) - $5.00

Shipping & Insurance *

USA- $8.00 (USPS Flat Rate Box + Insurance)

Canada - $25.95

Pick up at 2019 Dayton Hamvention Flea Market - No Cost

Other:

Check all boxes after you have read and agree to all informational statements below--

K8ZT is providing these materials as a service to the Ham Radio Community so this is not being ran as a "business". So I will be patient as there is no full time shipping department.

This is an “experimenters kit” and requires some knowledge of basic electronics, soldering and component assembly. I am good with this and will seek local help if necessary. Support from Anthony is limited and only via email.

I understand that this is a request to K8ZT to order the kit(s) and not an actual automated online ordering form. An email will be sent to me with details on my request, a total of cost and an address to send funds via PayPal or USPS Money Order. No credit cards or other forms of payment are currently acceptable. If you prefer to pay in cash and avoid shipping costs, please email me directly (k8zt@arrl.net) I can bring orders to this year’s 2018 Dayton Hamvention Flea Market.

Ordering out of stock parts may delay shipment

Name *

Call Sign

Address *

City *

State or Province or Country (if not US or Canada) *

Zip or Postal Code *

email address (this is where your order information will be sent) please allow a day or so *

How did you find out about KX 2nd Look

CQ Magazine Article

www.k8zt.com

Elecraft Mailing List

Web Search

Word of mouth

On-Air QSO

Other:

Clear selection

Submit

Clear form

Never submit passwords through Google Forms.

This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy

Forms