Strength of Material
Mock Test 2
1. Bulk modulus is
1 point
Clear selection
2. Young's modulus is
1 point
Clear selection
3. The relation between modulus of elasticity and modulus of rigidity is
1 point
Clear selection
4. The relation between Young’s modulus and bulk modulus is
1 point
Clear selection
5. A metallic bar 300mm*100mm*40mm is subjected to a force of 5KN (tensile), 6KN (tensile) & 4KN (tensile) along x, y & z directions respectively. Determine the change in the volume of the block. Take E=2*10^5 N/mm^2 and Poisson’s ratio=0.25.
1 point
Clear selection
6. A steel rod 5m long and 30mm in diameter is subjected to an axial tensile load of 50KN. Determine the change in length of the rod. Take E=2*10^5 N/mm^2 and Poisson’s ratio=0.25.
1 point
Clear selection
7. A bar of 30mm diameter is subjected to a pull of 60KN. The measured extension on gauge length of 200mm is 0.2mm and change in diameter is 0.004mm. Calculate the Young’s modulus in N/mm^2.
1 point
Clear selection
8. Elongation of a bar due to its own weight is directly proportional of
1 point
Clear selection
9. Hook’s law states within
1 point
Clear selection
10. Stress is expressed as
1 point
Clear selection
11. Determine the bulk modulus of a material, for which Young’s modulus is 1.2*10^5 N/mm^2 and modulus of rigidity is 4.8*10^4 N/mm^2.
1 point
Clear selection
12. The pressure on the fluid is 3MPa. The Young's modulus is 210GPa and the Poisson's ratio is 0.25, the volumetric compressive strain produced is
1 point
Clear selection
13. A brass bar having a cross-sectional area of 1000 mm^2 is subjected to axial forces as shown in the figure. Find the total change in length of the bar. [take E=1.05*10^5 N/mm^2]
1 point
Captionless Image
Clear selection
14. A tapers uniformly from 60mm to 30mm diameter in a length of 300mm. If the rod is subjected to an axial load of 6000N, then the extension of the rod______.[take E=2*10^5 N/mm^2]
1 point
Clear selection
15. The ratio of elongation of a conical and rectangular bar of same length under its own weight is_____.
1 point
Clear selection
16. Which material has highest value of Poisson's ratio?
1 point
Clear selection
17. The graph shows the character of ______.
1 point
Captionless Image
Clear selection
18. A free bar of length L is uniformly heated from 0°C to a temperature of t°C, α is the coefficient of linear expansion and E the modulus of elasticity. The stress in the bar is?
1 point
Clear selection
19. A metal rod is rigidly fixed at its both ends. The temperature of the rod is increased by 100°C. If the coefficient of linear expansion and elastic modulus of the metal rod are 10*10^-6 /°C and 200 GPa respectively then, the stress produced in the rod is ____MPa.
1 point
Clear selection
20. Thermal stress is independent of
1 point
Clear selection
Submit
Clear form
This content is neither created nor endorsed by Google.