Civil engineering quiz

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

This quiz for civil engineers, 10 questions, 5 points per question, choose the answers and submit finally, see your results.
All The Best - Mr. Engineers

In case of Raymond pile

5 points

lengths vary from 6 m to 12 m

diameter of top of piles varies from 40 cm to 60 cm

diameter of pile at bottom varies from 20 cm to 28 cm

thickness of outer shell depends upon pile diameter

all the above

Clear selection

Queen closer may be placed

5 points

in header course

in stretcher course

in header course next to first brick

in stretcher course next to first brick

Clear selection

Dado is usually provided in

5 points

dinning halls

bath rooms

living rooms

verandah

Clear selection

The foundation in which a cantilever beam is provided to join two footings, is known as

5 points

strip footing

strap footing

combined footing

raft footing

Clear selection

The foundations are placed below ground level, to increase

5 points

strength

workability

stability of structure

all the above

Clear selection

Stud(s) of a common wooden partition

5 points

are vertical wooden members

is the upper horizontal wooden member

is the lower horizontal wooden member

are the intermediate horizontal wooden members.

Clear selection

Pick up the correct statement from the following

5 points

inclined borings are made for taking samples under existing structures

inclined borings are occasionally used instead of vertical holes

the spacing of inclined borings is kept such that one bore hole is vertically above the bottom of an adjacent bore hole

all the above.

Clear selection

Pick up the commonly adopted geophysical method in civil engineering from the following

5 points

the seisomic method

electrical resistivity method

gravitational method

magnetic method

both (a) and (b) of the above

Clear selection

To ensure that supporting area of an offset footing of a boundary wall is fully compressive, the C.G. of load must act

5 points

at the centre of the base

within the middle third of the base

within the middle fifth of the base

neither (a), (b) nor (c).

Clear selection

The 9 cm x 9 cm side of a brick as seen in the wall face, is generally known as

5 points

stretcher

face

front

header

side.

Clear selection

Submit

Clear form

Forms

This content is neither created nor endorsed by Google.