Table saw Safety Quiz
What should be done with articles of clothing such as ties, coats and long sleeves when operating the table saw?
Keep them away from the saw blade
Remove or fasten them out of the way
Do not get close to the saw
Have a student hold them out of the way
Which of the following items should NOT be worn when operating the table saw?
All of these
Personal protective equipment which should be worn when operating the table saw is/are _________.
Both 2 and 3
When setting the table saw up for a job, the saw blade should be checked for
loss of temper
Cracks and missing teeth
After a cut has been completed, what should the operator do before leaving the table saw?
Turn the electrical service off at the circuit breaker or fuse box
Clear the work zone of all members
Make sure the saw blade has stopped turning
Lock the blade
When making a rip or crosscut, how far should the blade extend above the stock being cut?
bottom of gullet
Where should the hands of the operator be when bevel or chamfer cuts are being made?
Slightly to the right of the table edge
In front of the saw blade
Opposite side from which the blade is tilted
One hand on the right and one hand on the let of the blade
Which type of stock should never be ripped on the table saw?
A push stick must be used if material is less than _____ inches in width.
When ripping warped lumber the bow should be turned ___________.
Perpendicular to the blade
What is the accessory used when crosscutting on the table saw?
What does the operator need when long materials are crosscut on the table saw?
A properly adjusted fence
All of the above
This content is neither created nor endorsed by Google.
Terms of Service