SafeLogic Xtreme Quiz

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

First Name *

Last Name *

Company *

Email Address *

Address *

City *

State *

Zip/Postal Code *

Country *

#1. SafeLogic Xtreme is a redundant safe lock. This means that: *

In order to open the safe, you have to enter a code and dial the SpinDial combination

the lock opens by entering a valid code or by dialing the correct SpinDial combination

It cannot be operated in Dual Mode

All of the above

#2. The SafeLogic Xtreme is an EMP-proof safe lock because *

This lock can withstand any level of EMP attack and still open with an electronic code

Even if you encounter electronic malfunction due to an EMP blast, you will still be able to open your lock with the correct mechanical SpinDial combination

EMP can be harnessed to open this lock

None of the above

#3. The SafeLogic Xtreme has how many codes/combinations *

(1) Super Code, (1) User Code and a mechanical combination

(2) User codes and (2) mechanical combinations

1 User Code and a mechanical combination

#4. Installing a SafeLogic Xtreme is *

Easy if you follow the directions step - by step

Easy as pie, throw the instructions away!

A complicated process that requires you to remove the back cover

None of the above

#5. The first step to install the SafeLogic Xtreme is *

Install the spindle in the lock body

Thread the lock cable through the spindle hole and install the DialRing

Remove the lock body back cover

None of the above

#6. In order to properly size the spindle *

Measure the door thickness (DT) and add 1"

Use the spindle to measure the door thickness and then add 3/4"

Install the lock, insert the spindle, install the bolt (screw) into the spindle at the DialRing hub and mark the spindle flush with the lock cover, or measure the thickness of the door and add 1-3/4"

None of the above

#7. The clear plastic tube is *

inserted into the spindle hole to protect the lock cable when the spindle is turning

cut to the door thickness (DT)

placed so that it protrudes beyond the mounting plate and engages with the cavity on the lock body

All of the above

#8. When installing the DialRing, you should *

tighten the bolts (screws) down firmly

leave the bolts (screws) loose so that you can adjust the turning action of the Dial

not install the bolts (screws) until after the spindle is installed

None of the above

#9. In order to insert the bolt in the lower mounting hole of the DialRing you must *

Disassemble the Dial Ring

Rotate the Dial so that the access hole allows you to insert the bolt (screw)

Install the bolts (screw) only in the visible holes, dont worry about putting a bolt in the lower mounting hole.

All of the above

#10 The plastic tube included in the accessory kit *

is to be used to magnify the numbers on the Dial Ring

makes a decent pea shooter

is used to protect the lock cable from the turning of the spindle inside the spindle hole

All of the above

#11 After the DialRing is installed, the next step is *

Insert the precut plastic tube into the spindle hole, then install the lock body onto the mounting plate, ensuring the lock cable is not pinched or crushed under the lock body

Remove the back cover of the lock body to orient the cam correctly in the lock body

Test the mechanical combination

None of the above

#12 With the lock body installed it is now time to install the spindle, you should *

Push the spindle into the lock from the DialRing Side

Install the precut spindle into the lock with the drilled and tapped hole end first

Lock down the SpinDial Release at 0 and ensure that the 3 small Phillips head bolts (screws) are visible in all 3 Locator ports, then insert the pre-cut spindle with the drilled and tapped end first

None of the above

#13 Now that the spindle is inserted, the next step is *

Test the mechanical combination

Run the electronic default codes

Install the bolt (screw) into the drilled and tapped hole of the spindle at the DialRing hub and tighten the small Phillips head bolts in the Locator ports.

Loosen the Phillips head bolts (screw) in the Locator ports

#14 Now that the spindle is properly installed and fixed in place *

Dial the combination 4 to the right, 3 to the left, 2 to the right, and left to open.

Connect the lock cable to the lock body, install a fresh 9v battery, install the EntryPad on the DialRing and test the mechanical combination

Ensure that there is no debris in the lock body and re-install the back cover of the lock

None of the above

#15 The Default codes in the SafeLogic Xtreme are *

There are no default codes

The Super code is 50-50-50

Super (or Manager Code) Code is 111111; and the User Code is 123456

None of the above

#16 The Default SpinDial combination is *

1-2-3-4-5-6

50-25-50

All wheels are set on 50 (50-50-50)

1-1-1-1-1-1

#17 To change the Super Code from the default *

Enter 0-0-0-0-0-0, then enter the default User Code of 1-2-3-4-5-6, now enter new 10 digit Super Code and Repeat

Enter the Super Code and hold the last digit of the Super Code until you hear the second set of beeps, now press 1

Enter 0-0-0-0-0-0, then enter the default Super Code 1-1-1-1-1-1, now enter new 6 digit Super Code and Repeat

You should never change the Super Code (dont pick this one: ALWAYS change the Super Code or provide both the Super Code plus User Code to the safe lock owner)

#18 The SafeLogic Xtreme is *

A mechanical lock with an electronic code overide

An electronic lock with a mechanical overide

2 separate and distinct locks in one standard foot print

#19 To open the SafeLogic Xtreme with a valid code *

Enter the valid 6 digit code and then pull up on the SpinDial Release and rotate the lock to open it

Enter a valid code and turn the handle of the safe

Enter a valid code and cross your fingers

All of the above

#20 The SafeLogic Xtreme is *

A good option for gun safe and commercial safe owners

A good option to provide convenient Push Button access to your safe with a high security mechanical access for backup

An amazing engineering feat

A pretty cool safe lock

My answer to ensure customers can always open their safe, no matter what.

All of the above (HINT: Pick this one!!)

#21 This is not a graded question, but please let me know what you think of the SafeLogic Xtreme. And thanks for taking the quiz. *

Submit

Clear form

Never submit passwords through Google Forms.

This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy

Forms