INTERNATIONAL EUROPE CLASS INSPECTION ENTRY FORM
Please enter your boat data below and hit the 'Submit' button. You will get pdf file with your form by e-mail.
Please print it and have with you at inspection reception desk.
You will be able to correct your response later and use this form, once filled, for other events, changing only necessary items (e.g replaced parts).
WARNING: If you are to enter more than one boat (e.g for friend or as a coach), DO NOT use link to previously entered data from confirmation e-mail, nor "edit your response" link on confirmation screen. That will result in overwriting previously entered data (and is appropriate use if you need to correct something).
Instead, use original link from event page or link called "submit another response" on confirmation screen.

For any topic regarding this form contact us directly at:

europeclassmeasurement@gmail com

Have fun!

IECU technical team
0. Header data
0.0. Event *
Select the event. If you only filling or correcting your boat data for future, please use "@None, just data recording""
0.1. National letters *
0.2. Sail number without national letters *
1.1. Name *
This is your given name, like "John" or "Amelie"
1.2. Surname *
This is name of your family, e.g "Smith"
1.3. E-mail address *
At this address you will get the inspection entry form as pdf file or some communication about this form. It will not be used for anything else.
1.3.1. Communication about upcoming events
Would you like to receive e-mail, with link to this form before the next event?
Clear selection
1.4. Gender *
1.5. Date of birth *
MM
/
DD
/
YYYY
1.6. Weight (kg), e.g. 53.6 *
1.7. Height (cm), e.g. 165 *
2. National Certificate or part 9 of measurement form
That is certificate issued by your national association (or national association note in part 9 of the measurement form if there is no certificate). Please enter data as in certificate.
2.1. National certificate Issued by *
name of organization issuing the certificate
2.2. Date of certificate issue *
MM
/
DD
/
YYYY
2.3. Sail number (with national letters) in certificate *
2.4. Personal sail number, if any (with national letters)
2.5. World Sailing/ISAF/IYRU plaque number *
2.6. Name of measurer or person who signed certificate *
If you can not read it, just enter "unreadable"
2.7 Hull weight in certificate (kg), e.g. 44.8 *
2.8. Weight of corrector weight(s) (kg) *
if none please enter 0
2.9. Quantity of corrector weight(s) *
if none please enter 0
2.10. Date of hull first measurement if in certificate
MM
/
DD
/
YYYY
3. Measurement Form parts 1 & 2 - Hull
Please enter data as in part 1 and points 2.20 - 2.21 of Measurement Form
3.1. Hull Make *
3.2.World Sailing/ISAF/IYRU plaque number *
3.3. Name of measurer *
If you can not read it, just enter "unreadable"
3.4. Hull weight without corrector weight(s) (kg), e.g. 44.63 *
3.5.Weight of corrector weight(s) (kg), e.g. 0.320 *
if none please enter 0
3.6. Quantity of corrector weights *
if none please enter 0
3.7. Hull last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other".
Clear selection
4. Measurement Form Part 3 - Centreboard
Enter data as in point 3.0 of Measurement Form
4.1. Make *
4.2. Identifying code *
4.3. Name of measurer *
Should you could not read it, just enter "unreadable"
4.4. Date first measured *
MM
/
DD
/
YYYY
4.5. CB last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other"
Clear selection
5. Measurement Form Part 3 - Rudder blade
Enter data as in point 3.8 of Measurement Form
5.1. Make *
5.2. Identifying code *
5.3. Name of measurer *
Should you could not read it, just enter "unreadable"
5.4. Date first measured *
MM
/
DD
/
YYYY
5.5. Rudder blade last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other"
Clear selection
6. Measurement Form Part 3 - Rudderstock
Enter data as in point 3.15 of Measurement Form
6.1. Make *
6.2. Identifying code *
6.3. Name of measurer *
Should you could not read it, just enter "unreadable"
6.4. Date first measured *
MM
/
DD
/
YYYY
6.5. Rudderstock last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other"
Clear selection
7. Measurement Form Part 4 - Mast
Enter data as in points 4a1, 4a2, 4b2 of Measurement Form Part 4 - Mast
7.1. Make *
7.2. AMS sticker number
ussually 4 digit code found in point 4.a1 under" AMS fee for.......received". NOT AMC that is long code like 9F07141M05
7.3. Identifying code *
ussually 4 (SCS) or 5 (Ceilidh) digit number often found as "other manufacturers ID number on the mast" in point 4.a2 of MF
7.4. Name of measurer *
Should you could not read it, just enter "unreadable"
7.5. Date first measured *
MM
/
DD
/
YYYY
7.6. Weight of corrector weight (s) (kg), e.g. 0.020 *
if none please enter 0
7.7. Mast last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other"
Clear selection
8. Measurement Form Part 4 - Boom
Enter data as in points 4a1, 4a2, 4b2 of Measurement Form Part 4 - Mast
8.1. Make *
8.2. AMS sticker number
usually 4 digit code starting with B found in point 4a1 under" AMS fee for.......received". NOT AMC that is long code like 2R06071B01
8.3. Identifying code *
ussually found as "Other manufacturer ID numbers" if none, enter AMS sticker number (the same as in point above)
8.4. Name of measurer *
Should you could not read it, just enter "unreadable"
8.5. Date first measured *
MM
/
DD
/
YYYY
8.6. Weight of corrector weight(s) (kg), e.g. 0.032 *
if none please enter 0
8.7. Boom last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other"
Clear selection
9. Measurement Form Part 5 - Sail 1
Enter data as in point 5.1 in Measurement Form of Sail 1
9.1. Make *
9.2. IECU label number
9.3. Name of measurer *
Should you could not read it, just enter "unreadable"
9.4. Date first measured *
MM
/
DD
/
YYYY
9.4. Sail 1 last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other"
Clear selection
10. Measurement Form Part 5 - Sail 2 (optional)
Enter data as in point 5.1 in Measurement Form of Sail 2
10.1. Make
Clear selection
10.2. IECU label number
10.3. Name of measurer
Should you could not read it, just enter "unreadable"
10.4. Date first measured
MM
/
DD
/
YYYY
10.4. Sail 2 last time inspected and not altered since then
if it is first time or equipment has been altered, enter "N/A" in "Other"
Clear selection
11. Thank you!
11.1. Comments
Any comments to the data entered or the form itself. Those comments will not show in printed inspection entry form, but will be available for IECU and event measurer.
Submit
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Privacy Policy