Online/ Mock Test-22

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

TOPIC NAME:- HAND TOOLS (BY-N.K.RATHOD WIREMAN INSTRUCTOR ) MCQ-3

1) Which saw is used to cut across the grain of the wood?

3 points

Clear selection

2) What portable power tool is used to make straight cuts in wood?

3 points

Clear selection

3 ) James measures and marks a board correctly. If he saws on the waste side of the line and leaves the line, the size of the board will be:

3 points

A) longer than needed.

B) shorter than needed.

C) thicker than needed.

D) the appropriate length.

Clear selection

4) What picture is it

3 points

A) Pliers

B) Rope

C) Wrench

D) Drill

Clear selection

5) What picture is it

3 points

A) Pliers

B) Rope

C) Wrench

D) Scissors

Clear selection

6) A hammer drill is used to drill holes in:

3 points

A) metal.

B) plastic.

C) masonry.

D) wood.

Clear selection

7) A try square is used to mark:

3 points

A) 15° angles.

B) 30° angles.

C) curves.

D) 90° angles.

Clear selection

8) What hand tool should be used before starting to drill a hole in metal with a portable electric drill?

3 points

A) center punch

B) cold chisel

C) countersink

D) screwdriver

Clear selection

9) What pliers are used to reach into recessed areas?

3 points

A) long-nose pliers

B) side-cutting pliers

C) slip-joint pliers

D) vise-grip pliers

Clear selection

10) steel hand tool with small sharp teeth used for sharpening or shaping.

3 points

A) metal vise

B) steel file

C) chalk line

D) chalk line

Clear selection

11) A small carpenter's plane used on end grains of wood.

3 points

A) jack plane

B) back saw

C) quick clamp

D) block plane

Clear selection

12) A sliding square mounted on a steel rule, used to mark a "square" line, find level, or measure.

3 points

A) try square

B) combination square

C) coping saw

D) speed square

Clear selection

13) A tool used to measure "to scale".

3 points

A) steel file

B) bench ruler

C) scratch awl

D) architect ruler

Clear selection

14) A common tool with a rubber head designed to protect the surface being struck.

3 points

A) claw hammer

B) ball peen hammer

C) tack hammer

D) rubber hammer

Clear selection

15) An adjustable carpenter's tool for identifying and marking angles.

3 points

A) sliding t-bevel

B) wood chisel

C) coping saw

D) level

Clear selection

16) A retractable tool used to measure.

3 points

A) coping saw

B) cloth measuring tape

C) measuring tape

D) smoothing plane

Clear selection

17) A small portable drill held and operated by hand.

3 points

A) wood chisel

B) hack saw

C) chalk line

D) hand drill

Clear selection

18) A tool having one end of the head hemispherical and used in working metal.

3 points

A) claw hammer

B ) ball peen hammer

C) tack hammer

D) rubber hammer

Clear selection

19) A tool used to put in slotted screws.

3 points

A) cloth measuring tape

B ) claw hammer

C) flat head screw driver

D) phillips head screw driver

Clear selection

20) Woodworking tool used to mark a line at 90 degrees to the edge of the wood or find "square".

3 points

A) rip saw

B ) speed square

C) try square

D) jack plane

Clear selection

Submit

Clear form

Forms

This content is neither created nor endorsed by Google.