SDIT ,Civil E-QUIZ On General Disciplines of Civil Engineering.

Before sharing this exam customize this description, the title above, and the questions below.

Email address *

Full Name *

Institute/ College *

1] Identify the legend from photography. (Hint: first self-proclaimed Civil Engineer)

1 point

a) John Smeaton.

b) John F Kennedy.

c) T John.

d) John Michael.

Clear selection

2] What is the process of downward movement of water in vadose called?

1 point

a) Infiltration.

b) Filtration.

c) Deposition.

d) Down-flow

Clear selection

3] In nature water may occur in,

1 point

a) Liquid

b) Solid

c) vapours

d) all the above

Clear selection

4] Steel has its yield strength of 400N/mm2 and modulus of elasticity of 2x105MPa. Assuming the materials to obey Hooke’s Law up to yielding. what is the proof resilience?

1 point

a) 0.8N/mm2

b) 0.4N/mm2

c) 0.6N/mm2

d) 0.7N/mm2

Clear selection

5] A structure is said to be linearly elastic if,

1 point

a) Load Is directly proportional to displacement

b) Load is indirectly proportional to displacement.

c) Energy is directly proportional to displacement.

d) Energy is directly proportional to load.

Clear selection

6] The piezometric head in a static liquid,

1 point

a) Varies in the horizontal direction provided the Liquid is continuous.

b) Varies only in the vertical direction

c) Remains constant throughout the liquid

d) Does not vary in the vertical direction.

Clear selection

7] The discharge over a broad crested weir is the maximum when the depth of flow is

1 point

a) H/3

b) H/2

c) 2H/5

d) 2H/3

Clear selection

8] The process of revolving the telescope about its vertical axis in the horizontal plane is,

1 point

a) Transiting

b) Swinging

c) Transmitting

d) Face left

Clear selection

9] The whole circle bearing of a line is 5pie/3 radians, its quadrant bearing is.

1 point

a) N60oW

b) S60oE

c) N60oE

d) S60oW

Clear selection

10] The point on the celestial sphere vertical below the observer’s position is called

1 point

a) Zenith

b) Celestial point

c) Nadir

d) Pole

Clear selection

11] The crushing strength of first-class brick should not be less than

1 point

a) 3.5N/mm2

b) 7.0N/mm2

c) 10.5N/mm2

d) 14.0N/mm2

Clear selection

12] The most common admixtures which is used to accelerate the initial set of concrete is

1 point

a) Gypsum

b) Calcium chloride.

c) Calcium carbonate.

d) No of these

Clear selection

13] Wrought iron consists of carbon up to

1 point

a) 0.25%

b) 1.0%

c) 1.5%

d) 2%

Clear selection

14] The fundamental relationship between dry density, bulk density, and water content is

1 point

a) Bulk density=dry density/ (1+water content)

b) Dry density=bulk density/ (1+water content)

c) Water content=bulk density/ (1+dry density)

d) Water content=bulk density/ (1-dry density)

Clear selection

15] Over consolidation of soils is caused due to

1 point

a) Erosion of overburden.

b) Melting of ice sheets after glaciation.

c) Permanent rise of the water table

d) All the above

Clear selection

16] Critical depth(h) of a channel is,

1 point

a) H=V2/g

b) H=V2/2g

c) H=V/2g

d) H=V/G

Clear selection

17] The number of degrees of freedom of a point in space is,

1 point

a) 3

b) 6

c) 9

d) 1

Clear selection

18] Find the kinematic indeterminacy for the beam in this diagram

1 point

a) 4

b) 3

c) 2

d) 5

Clear selection

19) The minimum number of main steel bars provided in RCC,

1 point

a) Rectangular columns are 4

b) Circular columns are 6

c) Octagonal columns are 8

d) All the above

Clear selection

20) In most cases, for a given loading maximum stress and deflection of an indeterminate structure are ________ than that of a determinate one.

1 point

a) Smaller

b) Larger

c) Smaller for larger load

d) Larger for small load

Clear selection

21) Terzaghi’s formula can be applied for _______

1 point

a) Uniform sand

b) Clay soil

c) Coarse-grained soil

d) Fine-grained soil

Clear selection

22) Which mode allows the user to draw 90-degree straight lines in Auto CAD:

1 point

a) Linear

b) Polar tracking

c) Ortho

d) Osnap

Clear selection

23) Which of the following air pollution control device has maximum efficiency?

1 point

a) Dynamic precipitator

b) Wet cyclonic scrubber

c) Spray tower

d) Electrostatic precipitator

Clear selection

24) In India for the design of roads pedestrian is considered as ______

1 point

a) Element of traffic

b) Intruder in traffic

c) Controller of traffic

d) An essential part of traffic

Clear selection

25) Pick up the incorrect statement from the following: (based on networks in Construction Management and Entrepreneurship, CME)

1 point

a) The tail of the arrow indicates the start of the activity

b) An activity of a project is denoted by an arrow on the network

c) The arrows are drawn to scale from left to right

d) The head of the arrow indicates the end of the activity

Clear selection

26) By providing sufficient edge distance, which of the following failures of the riveted joint can be avoided?

1 point

a) Tension failure of the plate

b) Shear failure of the rivet

c) Crushing failure of the rivet

d) Shear failure of the plate

Clear selection

27) The entrance and exit curves of a rotary have,

1 point

a) Equal radii but pavement width is more at the entrance than at exit curve

b) Equal radii and equal widths of pavement

c) Different radii and different widths of pavement

d) Equal pavement widths but the radius is more at entrance curve than at exit curve

Clear selection

28) Municipal solid waste (MSW) contains a wide variety of materials

1 point

a) True

b) False

Clear selection

29) In which of the following states is rooftop rainwater harvesting a common practice?

1 point

a) Guwahati

b) Shillong

c) Imphal

d) Patna

Clear selection

30) Surge tanks are used,

1 point

a) For storage water

b) To increase the velocity in a pipeline

c) To guard against water hammer

d) None of the above

Clear selection

A copy of your responses will be emailed to the address you provided.

Submit

Never submit passwords through Google Forms.

reCAPTCHA

Privacy Terms

This content is neither created nor endorsed by Google. - Terms of Service - Privacy Policy

Forms