Peplink Certified Engineer (PCE) 3.0 - Mini Mock Exam
PCE Mini Mock Exam Format
▶ 30 minute time limit per attempt
▶ Multiple Choice Examination
▶ 15 Questions
▶ 70% Passing Grade
How many AP One Flex devices are needed for the following situation:- Area: 150 meter square outdoor- Number of clients: 20- Devices are installed on poles, 5m from the ground
Not sure; need to do a site survey.
If your cellular WAN is using a limited cellular data plan for failover purpose, which of the following features CANNOT help reduce bandwidth usage?
Enable cellular WAN IP Passthrough.
Choose SmartCheck as health check method.
Set standby state of cellular WAN to "Disconnected" instead of "Remain Connected".
Increase the value of "Health Check Interval".
None of the above.
Which kind of authentication support for L2TP Server does the Balance 380 have?
Which Peplink product can you use to configure Social Wi-Fi Hotspot?
For what reason should you select "Force UDP Encapsulation" when defining an IPsec profile?
To get through a NAT connection.
To increase security.
To gain higher throughput.
To increase privacy.
None of the above.
A customer deploying MAX would like to bring the LTE down if the signal strength gets under a given signal bar to be sure it doesn’t impact the SpeedFusion performance. Which setting should the customer choose?
Web Admin > Connection Details > Cellular Settings > LTE/3G
Web Admin > Connection Details > Signal Threshold Settings > Acceptable Level
Web Admin > Connection Details > Health Check Settings > Health Check Method > SmartCheck
Web Admin > Connection Details > General Settings > IP Passthrough
Web Admin > General Settings > Idle Disconnect
On what platform(s) can you run FusionHub?
Amazon Web Sevices
Citrix Xen server
Microsoft Hyper- V
All of the above
There are two situations when you may still want to use “Lowest Latency” as compare to Fastest Response Time. Which are the two?
For situations where bandwidth is available and duplication of packets is required.
For situations where bandwidth is limited and duplication of packets is not allowed.
For situations where bandwidth is available and duplication of packets is not allowed.
For sending traffic that requires acknowledgement (i.e. TCP stream)
For sending traffic that does not require a response (i.e. single direction UDP Stream)
In which situation is a Captive Portal applied to an SSID instead of a VLAN?
When deploying a Captive Portal to Pepwave MAX cellular routers
When deploying a Captive Portal to Pepwave Access Points only
What is the input power requirement for SD-PMU?
In an existing deployment, the MAX HD4 has 2 Ethernet WAN & 4 LTE connections. However, for emergency planning, the customer needs to add 2 wired WAN for Satellite connection. What is the best way to add the WAN ports?
Purchase USB-to-Ethernet Adapter and connect to the USB port.
Add 2x Balance 20 in front of MAX HD4, cascade to WAN1 & 2, to provide 4 WAN scenario.
Purchase the WAN Port Activation License for MAX HD4 to convert LAN 1-3 to WAN 3-5.
Purchase the BPL-ONE-LC-5WAN license to enable LAN 1-3 as WAN 3-5.
Nothing can be done, need 2 units of MAX HD4 to achieve 4 WAN ports requirement.
Does the SD Switch support routing protocol?
Please select the correct statement that explains the SD-WAN feature Secure VPN.
Peplink routers enable you to build one logical WAN connection using multiple technologies (e.g. xDSL, MPLS, cellular, fiber)
Using InControl 2, network administrators gain full control over their networks using a single interface
Using SpeedFusion VPN technology, branch offices gain secure, local network access to cloud resources
Peplink routers actively monitor WAN quality and make intelligent decisions to direct application traffic flow
MAX BR1 has two SIM slots (A and B), what is their intended use?
To store your extra SIM card safely.
Failover between SIM cards.
Load balancing on both SIM cards.
To get better throughput.
None of the above.
Which parameter does not affect SpeedFusion bonding efficiency?
Link packet loss.
Number of LAN clients.
Buffer bloat in ISP.
This form was created inside of Peplink, Pepwave.
Terms of Service