Woodworking handtools Quiz Questions

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Email *

Name *

Your name as on your Makespace membership

Membership number *

Your Makespace membership number. If you have not been issued with a membership number, please contact admin@makespace.org to get yours. Thank you.

What material can you cut/shape using hand tools?

sheet metals

acrylic, plastic or ceramic

Plywood

MDF

solid timber

Required

What PPE is required when using handtools? *

Safety goggles

Dust mask

Gloves

None of the above

If uncertain about using a tool for the first time what should you do? *

Ask others for help

Revisit the training

Proceed and assume its ok

Required

If you want to flatten a rough piece of hard wood, which tools should you use? *

Skew rabbet plane

1" bevel edge chisel

Bench plane

Router plane

Which part of a bench plane should you use to advance or retract the blade? *

Blade / Iron

Chip breaker

Lever cap

Sole

Frog

Adjustment knob

What should you not do with a chisel *

Use it on unsecured wood.

Use it when blunt.

Use it without checking the piece for screws, nails, and other metal debris.

Use it to open a tin of paint

Use it to clean dry glue

All of the above

Which saw would you use to remove waste material from dovetails? *

Panel saw

Western saw

Japanese saw

Coping saw

Mortice chisel

All of the above

To limit damage, the following reference tools should not be used with the marking knife. *

straight edge

steel rule

winding sticks

aluminium rule

your finger

Required

What is the correct order of the three basic sharpening steps?

Polishing, grinding, honing

Grinding, honing, polishing

Honing, polishing, grinding

Required

At what angle should the secondary bevel be established? *

23 degrees

30 degrees

35 degrees

55 degrees

Required

Which tool can you use to establish the primary bevel? *

Grinding stones @ 30 degrees

Tormek @ ~23 degrees

Sandpaper glued to a flat surface

The blade of a freshly sharpened chisel

On the Veritas honing guide where is the 0 degree position on the micro bevel? *

3 o'clock

6 o'clock

9 o'clock

12 o'clock

All of the above (the clocks broken!)

Should you use the waterstone straight out of the box? *

No. It must be soaked in water for at least five minutes and then flattened using the coarse diamond stone

Yes

No. It must be soaked in water for at least five minutes

Yes, as long as it is lubricated with oil

No. It must be flattened prior to use using the coarse diamond stone.

What can be done to a plane blade that should not be done to a chisel? *

Grind and hone a camber.

Use the ruler trick.

Assemble it with the chip breaker

None of the above

Required

What would you use the cambered roller on the Veritas Honing Guide for? *

Establish a camber on a bevel edge chisel

Sharpen the handsaws

Establish a camber on a plane blade

Submit a trouble ticket

A copy of your responses will be emailed to the address you provided.

Submit

Clear form

Never submit passwords through Google Forms.

reCAPTCHA

Privacy Terms

This form was created inside of makespace.org. Report Abuse

Forms