tb07000_22.2-3Li-ion

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Test to perform

接头方向要对正，不能偏；接头固定牢固，不能松动； The connector direction should be aligned and not biased; the connector is fixed firmly and cannot be loosened;

用充电器和工具验证接头接线是否正确，并检测电池能否正确充放电； Use the charger and tool to verify that the connector is wired correctly and that the battery is properly charged and discharged.

检查塑料件（包括接头盖子）是否正确安装；小卡簧不能遗漏； Check that the plastic parts (including the connector cover) are properly installed; the small circlips should not be missed;

检测防水，打入6Bar气压并在水中静止至少半分钟，无气泡合格； Test the waterproof, enter the 6Bar air pressure into the battery and put in water for half a minute at least, No bubble is OK;

检查电池外观，不能压到密封圈，不能有刮花，不能有螺栓遗漏等现象； Check the appearance of the battery, The Oring cannot jump out of the slot, there must be no scratches, no leakage of bolts, etc.;

电池出货电量保持在21.5~22.5V； Keeping battery 21.5V~22.5V when shipping；

Other:

By *

Comments (Not Mandatory)

Submit

Clear form

Never submit passwords through Google Forms.

This form was created inside of NemoPowerTools.

Does this form look suspicious? Report

Forms