Haz Chem 1.0 - Gas cylinders
Quiz for module Haz Chem 1.0 - Gas cylinders (HC_1.0_v3)
Sign in to Google to save your progress. Learn more
Email *
Name *
zID *
Module Document Declaration
This module is based on the following documents which you must have read, and declared as read, and the following videos which you must declare as viewed:

SCI-CHEMSCI-SWP-1513 - Gas Cylinders and Pressure Regulators
UNSW-GUIDE-HS-920 - Gas and Regulator Safety Guideline

PLEASE NOTE:
-> The declaration statement has no bearing on your quiz score.
-> If you have declared the documents as read during a previous quiz attempt, you do not need to declare them as read again.
-> If you have passed the quiz previously but not declared the documents as read, you may declare them as read at any time but you do not need to pass the quiz again.
I declare...
… that I have read the following required documents, and viewed the following required videos (if applicable) for this module and will comply with the instructions and procedures contained within them. (Select all that apply)
Module Quiz
When transporting a gas cylinder, you must: (select all that apply) *
Required
True or false – a cylinder valve outlet has threads that depend on the type of gas contained in the cylinder and therefore require the correct regulator to match. *
When moving a cylinder onto a trolley, you should: (select all that apply) *
Required
To transport a cylinder in the lift you must: (select all that apply) *
Required
True or false - you can ride in the lift with a gas cylinder as long as the cylinder is empty. *
How frequently must portable cylinder mounted gas regulators be overhauled when used with non-corrosie gas? *
True or false - wall-mounted regulators must be tested and calibrated every 6 months and serviced every 12 months. *
True or false - you must avoid the presence of oil, grease or other combustible materials when working with oxygen cylinders and regulators. *
Regulators for flammable gases screw on in which direction? *
Defective or out-of-date regulators should be: (select all that apply) *
Required
True or false – all gas cylinders must be stored upright and secured with chains or straps. *
The inlet pressure gauge of a regulator should be at least: *
Which direction must the regulator Pressure Control Knob be turned to close the regulator? *
When connecting a regulator and opening the gas cylinder valve, you should: *
Which of the following should you ALWAYS do when working with gas cylinders and regulators? (Select all that apply) *
Required
Which of the following should you NEVER do when working with gas cylinders and regulators? (Select all that apply) *
Required
After connecting a regulator, and with the cylinder valve closed, which of the following must you do BEFORE opening the cylinder valve? *
Submit
Clear form
Never submit passwords through Google Forms.
GoogleForms
This content is neither created nor endorsed by Google.