Drill Press Safety/Operations Quiz
Email address *
which metal should you lubricate with cutting oil before drilling
1 point
Before using a drill press what precautions do you need to take *
1 point
Required
A center punch should be used for a guide... *
1 point
what is the sequence of operations when drilling *
step 1
step 2
step 3
step 4
step 5
step 6
step 7
step 8
Column 9
lubricate
clamp
measure and dimple
clean area/put drill bit away
adjust speed
pull feed lever
insert drill bit
set table elevation
What personal protective equipment should be used when operating a drill presses?
1 point
When operating a drill press you should
1 point
While working on the Drill Press, what is the function of the depth stop?
1 point
What is the purpose of clamping the work piece securely to the table when drilling holes?
1 point
How do you change the speed of a drill press?
1 point
Why should you put a piece of scrap wood under the work piece when drilling a hole through the wood?
1 point
Before starting the drill press, always make sure that:
1 point
A chip brush should be used for removing wood or metal chips.
1 point
The drill should be operated at top speed for all work.
1 point
The long end of the work should be to the right of the operator
1 point
When drilling metal, a pilot hole is not required until the hole size is larger than 3/4 of an inch
1 point
You should wear gloves to protect yourself from burns.
1 point
What safety precautions should you take before turning on the drill press *
1 point
Required
If the drill grabs the metal and spins it, you should grab the piece of metal to keep from damaging it or it fling off.
1 point
Use lubricants while drilling stock to prevent the bit from heating up and dulling
1 point
If you drilling cylindrical stock, you should use a _________ to hold the stock firmly while drilling.
1 point
Submit
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Additional Terms