Safety Quiz
Email address *
First Name *
Your answer
Last Name *
Your answer
S# *
Your answer
Quiz Questions
1. When is it OK to unlock the Slide Stop on the Miter Saw? *
1 point
2. When using the Miter Saw you must always make sure that: *
1 point
3. What should you ALWAYS do before turning on any power tool? *
1 point
4. When using the Miter Saw, your work piece must be pushed against the fence. *
1 point
5. Long hair should be tied back and out of the way before using the Miter Saw. *
1 point
6. When finished working with the Miter Saw you don't need to lock it in the down positioning. *
1 point
7. Loose clothing must be removed or secured before using the Miter Saw. *
1 point
8. When must safety glasses be worn while in the build area? *
1 point
9. When finished working with the Miter Saw you don't need to sweep up your area, IDEA Lab members will do that for you. *
1 point
10. When finished working with the Miter Saw, you must... *
1 point
11. When using the sliding function of the Miter Saw, start cutting with the blade closest to you, plunge downward, and then push the blade forward on its sliders as you cut. *
1 point
12. Metal can be easily cut on the Miter Saw. *
1 point
13. When cutting with the Scroll Saw never place your hands in the blade path. *
1 point
14. Always ________ at the point where the blade is about to cut completely through the wood. If you have too much pressure on the board your hand may slip and go into the blade. *
1 point
15. Before using the Scroll Saw always make sure that... *
1 point
16. Always shut the Scroll Saw off before brushing away any dust or debris from the saw or work piece. *
1 point
17. Before using the Scroll Saw you must always make sure that... *
1 point
18. The Scroll Saw is know for its' ability to cut curves. Can this tool cut 90 degree angles? *
1 point
19. The Scroll Saw blade teeth should be positioned so that the blade cuts on the down stroke. *
1 point
20. If a blade should happen to break what should you do? *
1 point
21. When finished using the Scroll Saw always clean up you work area with a brush and dustpan or vacuum. *
1 point
22. Which of the following would be appropriate on the Scroll Saw? *
1 point
23. You should always secure your work piece in the Drill Press vice before drilling into it. *
1 point
24. Before cutting/drilling with the Drill Press you should always check to make sure that... *
1 point
25. You should ONLY change the speed of the Drill Press while the drill is spinning. *
1 point
26. It is safe to wear loose clothing around the Drill Press. *
1 point
27. When finished using the Drill Press you must always... *
1 point
28. While cutting/drilling it is best practice to use your right hand to control the crank and have your left hand on the power switch in case something goes wrong during the cut. *
1 point
29. It is safe to hold onto your work piece while cutting/drilling with your hand. *
1 point
30. Before using the Drill Press it is important to... *
1 point
31. When operating the Drill Press you should... *
1 point
32. Metals and woods can be cut/drilled in the same fashion. *
1 point
Submit
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service