Request edit access
3in1 Extruder Upgrade - Universal
This is a bolt-on replacement extruder feeder upgrade made from billet Aluminum and PEEK engineering polymer for the following 3D Printers:

Makerbot Replicator 1
Makerbot Replicator 2
Makerbot Replicator 2X

Wanhao Duplicator 4/4X/4S/I3
FlashForge Creator
MagicFirm Mbot3D
CTC Bizer Series
Monprice Maker Select PIII

It is designed and manufactured for long life and durability under extreme temperature (PEEK performs well up to 480*F so it will continue to work if you choose to print ABS/Nylon which requires higher temperature)

Below, you can customize the solution you wish for your printer by selecting modules. If you wish, your kit can include all the parts required to replace your existing extruder feed mechanism including the tool for adjusting spring tension.

CHECK HERE FOR PART AVAILABILITY -> www.devilsinthedetails.ca/inventory.phtml

Also view the full manual, download a ZIP package which contains the installation instructions and STL versions at www.devilsinthedetails.ca.

Each unit will be pre-assembled and test fit onto a NEMA-17 stepper motor for quality control (only if you buy all the components for a complete kit). Each kit weighs 75g per extruder and is shipped out in a bubble mailer envelope by Small Packet Air mail to keep cost minimal. Once the buyer pays by Paypal, the kit will ship out the next day (If there are units available in stock).

If you have any questions, send them to questions@devilsinthedetails.ca and I will get back to you right away. Also, if you don't receive an invoice within a couple of days, email me as well. Thanks.

Want to know more? Check out the development process here:
https://groups.google.com/forum/#!topic/makerbot/SuzXohTGeZs

Which 3D Printer is this for? *
If your printer is not listed, please select Other and give details in the next section.
Required
If you are buying for multiple printers or selected Other, let me know the details.
This will ensure you get the correct hardware.
Your answer
Have you already purchased some modules from here (leave blank if not)?
(i.e. you bought just hardware modules previously or parts for only one extruder and are now upgrading)
Module Selection / Information
Select which modules you want. If you want complete replacements in Aluminum / PEEK, select the components as appropriate for your printer.

Replicator 1 = 1 right extruder module + 1 left extruder module + 2 hardware modules.
Replicator 2 = 1 right extruder module + 1 hardware module.
Replicator 2X = 1 right extruder module + 1 left extruder module + 2 hardware modules.
Duplicator 4 / 4X / 4S = 1 right extruder module + 1 left extruder module + 2 hardware modules.
Duplicator I3 / Monoprice Maker Select PIII = 1 right extruder module + 1 hardware module.

1 full kit fits inside an 8" x 5" shipping envelope. If you order more than 1 kit, they will be divided up into the minimum number of kit shipments.

If you want to try before you buy, it is possible to only order hardware modules for use with printable versions of the extruder module. Be warned that the printed surfaces are not as smooth and therefore do not slide as freely. Also, the printable parts may vary depending on the capabilities / personality of your printer. Later you can come back and upgrade to the Aluminum / PEEK parts by buying just the extruder modules and transferring your hardware.

How many RIGHT extruder modules would you like to buy? *
Each module is $88 US (requires 1 hardware module).
How many LEFT extruder modules would you like to buy? *
Each module is $88 US (requires 1 hardware module).
How many hardware modules would you like to buy? *
Each module is $12 US and is good for 1 extruder module.
Would you like any RIGHT PEEK components (NOT required - spares only)? *
Each spare is $30 US (spare part only)
Would you like any LEFT PEEK components (NOT required - spares only)? *
Each spare is $30 US (spare part only)
Shipping / Contact Information
Shipping is typically as follows for a complete kit and governed by size
(Minimum shipping shown below but may vary depending on what quantity you order):

$9 US for shipping to CAN/US destinations (5-10 Business Days).
$13 US for shipping to International destinations (10-15 Business Days).

Full kit = 150g @ 8" x 5" x 1"

What is your full name? *
If you wish to send it to someone's attention, add their name to the shipping address below.
Your answer
To what postal address would you like to have it shipped? *
Please be as accurate as possible to prevent delays in shipping (I verify addresses using Google maps and ignore any shipping addresses provided through Paypal).
Your answer
What email address would you like your invoice sent to? *
Completing this form is not the final step, you will be sent a Paypal invoice by email.
Your answer
You will receive a PayPal invoice by email shortly!
Submit
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service - Additional Terms