Copy responder link
Copy
Published
Sign in
Section 1 of 8
[MSE]  ZEM-3 熱電材料性質變溫量測系統預約   : Booking Calendar
您最遲可以在 72 小時前預約該儀器，最早可以預約30天後的儀器時段

ZEM預約注意事項:
1.量測溫度範圍: 高溫模式: 30~600 °C   低溫模式: -120~150 °C
   *低溫模式需額外支付液態氮及前置作業操作費共1350元
2.可量塊材或薄膜
3.為防止腔體汙染，禁止量測加熱後會產生外溢或氣體汙染之樣品
    *請先確認是否量測過 DSC or TGA
4.本儀器目前僅提供委託操作服務
5.如需預約時段請在每週二下午4-6點或三、四 下午1-3點 直接至材料系新館 實驗室:44410 進行安排
6.如無法親自前往實驗室預約可寄信至: n56124618@gs.ncku.edu.tw 進行詢問
7.實際繳交費用會在代測結束後和您進行核對


You can make an appointment for the instrument at the latest 24 hours in advance, and at the earliest 30 days later.

Notes for ZEM Appointment:
1.Measuring temperature range:  High temperature mode : 30~600  °C  
                                                            low  temperature mode :  -120~150°C
*An additional fee of NTD 1350 is required for the low-temperature mode, including pre-operation and
     Liquid nitrogen
2.It can measure bulk or thin film material
3. In order to prevent the contamination of the cavity, it is forbidden to measure samples that will produce 
    spillage or gas pollution after heating
    *Please confirm if DSC or TGA measurements have been conducted previously
4.This instrument currently only offers commission operation services
5.To schedule a time slot, please visit Laboratory 44410 in the new building of the Materials Department on
    Tuesdays from PM 4-6 or on Wednesdays and Thursdays from PM 1-3 5.
6.If you are unable to visit the laboratory in person to make a reservation,
    you can send an email to: n56124618@gs.ncku.edu.tw.
7.The actual charges will be verified with you and your signature after the testing is completed.
This form is automatically collecting emails from all respondents.Change settings
收費標準 (Charges)
請自行準備測量樣品
(Please prepare your own samples for measurement )
Loading image…
Loading...
Loading…
我同意收取上述儀器費用，I agree to the above instrument fee
Question Type
Loading image…
我同意，I agree
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
姓名 (name)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
電子信箱(email)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
所屬系所 (department)
Question Type
Loading image…
本校材料系(所) ,Department of Materials in NCKU.
本校學生, NCKU Student
外校學生, Other school
廠商，Manufacturer
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
Section 2 of 8
材料系教授實驗室 (Lab)
請選擇實驗室, Please select a laboratory
實驗室教授 (Professor)
Question Type
Loading image…
1.
劉浩志 教授
2.
黃肇瑞 教授
3.
林光隆 教授
4.
劉全璞 教授
5.
陳引幹 教授
6.
丁志明 教授
7.
廖駿德 教授
8.
陳貞夙 教授
9.
許聯崇 教授
10.
洪飛義 教授
11.
朱建平 教授
12.
方冠榮 教授
13.
齊孝定 教授
14.
郭瑞昭 教授
15.
郭昌恕 教授
16.
李旺龍 教授
17.
阮至正 教授
18.
林士剛 教授
19.
蘇彥勳 教授
20.
張高碩 教授
21.
許文東 教授
22.
呂國彰 教授
23.
陳嘉勻 教授
24.
徐邦昱 教授
25.
劉俊彥 教授
26.
賴怡旋 教授
27.
陳雨澤 教授
28.
鍾昇恆 教授
29.
鄭文惠 教授
30.
魏百駿 教授
31.
Add option
…
Answer key
(0 points)
Loading...
Loading…
實驗室分機 (Lab ext)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡人姓名 (Name)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡電話 (mobile phone number)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
Section 3 of 8
外系填寫區 ( Other department )
請填寫系所及實驗室教授(ex. 材料系 魏百駿教授 實驗室),  department & professor & Lab
科系 (Department)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
實驗室 (Lab)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
實驗室分機 (Lab ext)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡人姓名 (Name)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡電話 (mobile phone number)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
Section 4 of 8
外校填寫區(Other school)
請填寫學校及實驗室教授(ex. 成大材料 魏百駿 教授 實驗室), school & professor & Lab
學校科系及實驗室 (School & Lab)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
實驗室電話 (Lab ext)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡人姓名 (Name)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡電話 (mobile phone number)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
Section 5 of 8
廠商填寫區 (Manufacturer)
請填寫公司資訊 ( Manufacturer  information)
廠商名稱 (Manufacturer name)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
廠商電話 (ext)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡人姓名 (Name)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
緊急聯絡電話 (mobile phone number)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
Section 6 of 8
選擇預約時段, Booking time
如需預約時段請在每週二下午4-6點或三、四 下午1-3點, 直接至材料系新館 實驗室:44410 進行安排
如無法親自前往實驗室預約者可寄信至: n56124618@gs.ncku.edu.tw 進行詢問
以小時計費
預估測量室溫樣品需約1小時
之後每個溫度點大約需要30分鐘

To schedule a time slot, please visit Laboratory 44410 in the new building of the Materials Department on
Tuesdays from PM 4-6 or on Wednesdays and Thursdays from PM 1-3 5.
If you are unable to visit the laboratory in person to make a reservation,
you can send an email to: n56124618@gs.ncku.edu.tw.
Charging by the hour
Estimated measurement time for room temperature samples is approximately 1 hour, and thereafter, each temperature point will take about 30 minutes.
預約時間
Question Type
Powerred by Calendar event Booking: https://gsuite.google.com/marketplace/app/calendar_event_booking/158334743345
Loading image…
1.
ZEM | Aug 10, 2026 00:00 - 00:00 Aug 11, 2026
2.
ZEM | Aug 11, 2026 00:00 - 00:00 Aug 12, 2026
3.
ZEM | Aug 12, 2026 00:00 - 00:00 Aug 13, 2026
4.
ZEM | Aug 13, 2026 00:00 - 00:00 Aug 14, 2026
5.
ZEM | Aug 14, 2026 00:00 - 00:00 Aug 15, 2026
6.
ZEM | Aug 17, 2026 00:00 - 00:00 Aug 18, 2026
7.
ZEM | Aug 18, 2026 00:00 - 00:00 Aug 19, 2026
8.
ZEM | Aug 19, 2026 00:00 - 00:00 Aug 20, 2026
9.
ZEM | Aug 20, 2026 00:00 - 00:00 Aug 21, 2026
10.
ZEM | Aug 21, 2026 00:00 - 00:00 Aug 22, 2026
11.
ZEM | Aug 24, 2026 00:00 - 00:00 Aug 25, 2026
12.
ZEM | Aug 25, 2026 00:00 - 00:00 Aug 26, 2026
13.
ZEM | Aug 26, 2026 00:00 - 00:00 Aug 27, 2026
14.
ZEM | Aug 27, 2026 00:00 - 00:00 Aug 28, 2026
15.
ZEM | Aug 28, 2026 00:00 - 00:00 Aug 29, 2026
16.
ZEM | Aug 31, 2026 00:00 - 00:00 Sep 1, 2026
17.
ZEM | Sep 1, 2026 00:00 - 00:00 Sep 2, 2026
18.
ZEM | Sep 2, 2026 00:00 - 00:00 Sep 3, 2026
19.
ZEM | Sep 3, 2026 00:00 - 00:00 Sep 4, 2026
20.
ZEM | Sep 4, 2026 00:00 - 00:00 Sep 5, 2026
21.
ZEM | Sep 7, 2026 00:00 - 00:00 Sep 8, 2026
22.
ZEM | Sep 8, 2026 00:00 - 00:00 Sep 9, 2026
23.
ZEM | Sep 9, 2026 00:00 - 00:00 Sep 10, 2026
24.
ZEM | Sep 10, 2026 00:00 - 00:00 Sep 11, 2026
25.
ZEM | Sep 11, 2026 00:00 - 00:00 Sep 12, 2026
26.
ZEM | Sep 14, 2026 00:00 - 00:00 Sep 15, 2026
27.
ZEM | Sep 15, 2026 00:00 - 00:00 Sep 16, 2026
28.
ZEM | Sep 16, 2026 00:00 - 00:00 Sep 17, 2026
29.
ZEM | Sep 17, 2026 00:00 - 00:00 Sep 18, 2026
30.
Add option
…
Answer key
(0 points)
Loading...
Loading…
請仔細閱讀注意事項, Please read the precautions carefully
 ZEM預約注意事項:
1.量測溫度範圍: 高溫模式: 30~600 °C   低溫模式: -120~150 °C
 *低溫模式需額外支付液態氮及前置作業操作費共1350元
2.為防止腔體汙染，禁止量測加熱後會產生外溢或氣體汙染之樣品
    請先確認是否量測過 DSC or TGA

Notes for ZEM Appointment:
1. Measuring temperature range: High temperature mode : 30~600 °C  
                                                            low  temperature mode :  -120~150°C
*An additional fee of NTD 1350 is required for the low-temperature mode, including pre-operation and
     Liquid nitrogen
2. In order to prevent the contamination of the cavity, it is forbidden to measure samples that will produce  
    spillage or gas pollution after heating
    Please confirm if DSC or TGA measurements have been conducted previously
Loading...
Loading…
若未遵守上述注意事項，If the above precautions are not followed,
Question Type
Loading image…
我同意全額負責維修儀器費用, I agree to be fully responsible for the cost of repairing the instrument
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
填表預約以後，請至信箱確認參加，請務必勾選「接受」，才表示「成功」預約該儀器使用時段 , After filling in the form and making an appointment, the system will send a confirmation letter. Please be sure to check "Accept" to indicate "successful" to reserve the instrument period of use.
Question Type
Loading image…
我知道了, I understand
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
Section 7 of 8
代工申請資訊 (Foundry Application Survey)
實驗樣品是否已做過DSC或TGA確認樣品在高溫時不會產生外洩氣體
Question Type
Loading image…
是
否 ,作業人員評估後會再以信件回覆您是否可進行測量
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
量測樣品數 (Sample number)
Question Type
Loading image…
to
1
Label (optional)
10
Label (optional)
Answer key
(0 points)
Loading...
Loading…
請填寫量測模式(Please fill in the measurement mode*)
Question Type
Loading image…
高溫模式 : 30~600 °C (High temperature mode)
低溫模式 : -120~150 °C (Low temperature mode)
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
樣品形狀(Shape of sample)
Question Type
Loading image…
長方體 (Rectangular column)
圓柱體 (Cylinder)
薄膜 (Thin film)
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
請依序填寫樣品長*寬*高 or 直徑*高
( please provide Length*Width *Height or diameter*Height of the material  )

樣品大小範圍 (Sample size range)
*塊材-長方體(bulk-rectangular column)
   最小(Minimum) 1*1*7 mm
   最大(Maximum) 4*4*15 mm
*塊材-圓柱體(bulk-cylinder)
   最小(Minimum) 1*1*7 mm
   最大(Maximum) 4*4*15 mm
*薄膜(Thin film)
  最小(Minimum) 10*4 mm
  最大(Maximum) 11*4 mm
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
請依序寫下樣品名稱 / 簡單描述樣品及測量溫度範圍/條件 
(Please indicate clearly in order Sample name / brief description your sample and measuring temperature range)
ex:Bi2Te3/273~373K/每10K一個點
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
Section 8 of 8
開立發票資訊 (Invoice Information)
由成大研究發展基金會開立，需填寫發票資訊
每月結算費用
Opened by NCKU Research and Development Foundation, need to fill in the invoice information
monthly billing fee
發票抬頭 (統編 ex.國立成功大學69115908), Invoice name
Question Type
Loading image…
國立成功大學 (NCKU) 69115908
Other:
Add option
…
Answer key
(0 points)
Loading...
Loading…
發票寄送收件人 (Invoice to recipient)
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
發票寄送地址 (校內可填學校地址+系館) , Invoice mailing address
Question Type
Loading image…
Answer key
(0 points)
Loading...
Loading…
實際繳交費用
會在代測結束後當場或寄出E-MAIL您進行核對
(The actual payment will be settled either on the spot or sent to you via email for verification after the testing is completed.)
Question Type
Loading image…
我知道了, I understand
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
收到信件回覆後,視同負責人已同意使用,未收到回覆者不可自行使用,若擅自使用,後果請自行負責。 After receiving the e-mail reply, it is deemed that the manager in charge has agreed to use it. Those who have not received a reply cannot use it by themselves. If you use it without authorization, you will be responsible for the consequences.
Question Type
Loading image…
我知道了, I understand
Add option
or
add "Other"
…
Answer key
(0 points)
Loading...
Loading…
Link to Sheets
Insights
Total points distribution
Loading...
Loading responses…
我同意收取上述儀器費用，I agree to the above instrument fee
Copy chart
No responses yet for this question.
姓名 (name)
Copy chart
No responses yet for this question.
電子信箱(email)
Copy chart
No responses yet for this question.
所屬系所 (department)
Copy chart
No responses yet for this question.
材料系教授實驗室 (Lab)
實驗室教授 (Professor)
Copy chart
No responses yet for this question.
實驗室分機 (Lab ext)
Copy chart
No responses yet for this question.
緊急聯絡人姓名 (Name)
Copy chart
No responses yet for this question.
緊急聯絡電話 (mobile phone number)
Copy chart
No responses yet for this question.
外系填寫區 ( Other department )
科系 (Department)
Copy chart
No responses yet for this question.
實驗室 (Lab)
Copy chart
No responses yet for this question.
實驗室分機 (Lab ext)
Copy chart
No responses yet for this question.
緊急聯絡人姓名 (Name)
Copy chart
No responses yet for this question.
緊急聯絡電話 (mobile phone number)
Copy chart
No responses yet for this question.
外校填寫區(Other school)
學校科系及實驗室 (School & Lab)
Copy chart
No responses yet for this question.
實驗室電話 (Lab ext)
Copy chart
No responses yet for this question.
緊急聯絡人姓名 (Name)
Copy chart
No responses yet for this question.
緊急聯絡電話 (mobile phone number)
Copy chart
No responses yet for this question.
廠商填寫區 (Manufacturer)
廠商名稱 (Manufacturer name)
Copy chart
No responses yet for this question.
廠商電話 (ext)
Copy chart
No responses yet for this question.
緊急聯絡人姓名 (Name)
Copy chart
No responses yet for this question.
緊急聯絡電話 (mobile phone number)
Copy chart
No responses yet for this question.
選擇預約時段, Booking time
預約時間
Copy chart
No responses yet for this question.
請仔細閱讀注意事項, Please read the precautions carefully
若未遵守上述注意事項，If the above precautions are not followed,
Copy chart
No responses yet for this question.
填表預約以後，請至信箱確認參加，請務必勾選「接受」，才表示「成功」預約該儀器使用時段 , After filling in the form and making an appointment, the system will send a confirmation letter. Please be sure to check "Accept" to indicate "successful" to reserve the instrument period of use.
Copy chart
No responses yet for this question.
代工申請資訊 (Foundry Application Survey)
實驗樣品是否已做過DSC或TGA確認樣品在高溫時不會產生外洩氣體
Copy chart
No responses yet for this question.
量測樣品數 (Sample number)
Copy chart
No responses yet for this question.
請填寫量測模式(Please fill in the measurement mode*)
Copy chart
No responses yet for this question.
樣品形狀(Shape of sample)
Copy chart
No responses yet for this question.
請依序填寫樣品長*寬*高 or 直徑*高
( please provide Length*Width *Height or diameter*Height of the material  )

樣品大小範圍 (Sample size range)
*塊材-長方體(bulk-rectangular column)
   最小(Minimum) 1*1*7 mm
   最大(Maximum) 4*4*15 mm
*塊材-圓柱體(bulk-cylinder)
   最小(Minimum) 1*1*7 mm
   最大(Maximum) 4*4*15 mm
*薄膜(Thin film)
  最小(Minimum) 10*4 mm
  最大(Maximum) 11*4 mm
No responses yet for this question.
請依序寫下樣品名稱 / 簡單描述樣品及測量溫度範圍/條件 
(Please indicate clearly in order Sample name / brief description your sample and measuring temperature range)
ex:Bi2Te3/273~373K/每10K一個點
No responses yet for this question.
開立發票資訊 (Invoice Information)
發票抬頭 (統編 ex.國立成功大學69115908), Invoice name
Copy chart
No responses yet for this question.
發票寄送收件人 (Invoice to recipient)
Copy chart
No responses yet for this question.
發票寄送地址 (校內可填學校地址+系館) , Invoice mailing address
Copy chart
No responses yet for this question.
實際繳交費用
會在代測結束後當場或寄出E-MAIL您進行核對
(The actual payment will be settled either on the spot or sent to you via email for verification after the testing is completed.)
Copy chart
No responses yet for this question.
收到信件回覆後,視同負責人已同意使用,未收到回覆者不可自行使用,若擅自使用,後果請自行負責。 After receiving the e-mail reply, it is deemed that the manager in charge has agreed to use it. Those who have not received a reply cannot use it by themselves. If you use it without authorization, you will be responsible for the consequences.
Copy chart
No responses yet for this question.
Settings
Responses
Manage how responses are collected and protected
Presentation
Manage how the form and responses are presented
Defaults
Form defaults
Settings applied to this form and new forms
Question defaults
Settings applied to all new questions
.