Kit Order Form: Early Bird Jenny (Gen 2)

Request edit access

JavaScript isn't enabled in your browser, so this file can't be opened. Enable and reload.

Kit Order Form: Early Bird Jenny (Gen 2)

Upon clicking "Submit", Timber Tiger Aircraft, Inc. will send an invoice for your selected options. ONLY submit this form if you intend to place an order. Need help ordering? Contact us at nick@timbertigeraircraft.com or (303) 725-5439.

Click Here for More Jenny Information

Timber Tiger Aircraft is the ONLY source for Early Bird Jenny kits and support. Parts and support will not be supplied to those who don't have a serial number from either Early Bird Aircraft (Gen 1) or Timber Tiger Aircraft (Gen 2).

www.TimberTigerAircraft.com

Email *

Pick one or pick all! The entire airplane can be built from just the Basic Kit with the remaining materials sourced by the builder, but the options provided below make life a lot easier for those with less time.

EB Jenny Basic Kit (welded and primed fuselage, includes pre-welded tabs. Includes materials for the seats and landing gear fittings. Also includes blueprints for the rest of the airframe. Requires welding of engine mounts unless specified below.) | $7,500

Flying Surface Kit (Wing ribs, materials, hardware, and turnbuckles for wings and stabilizers, does not include wooden struts as optioned below) | $6,900

Want to save money? Get the MASTER KIT. (Basic Kit, Flying Surface Kit, Epoxied Fuselage, Pre-Welded landing Gear Bracketry, Pre-Welded Seats, Pre-Welded Wing Strut Bracketry, Pre-Routed Wooden Struts, Cowl Kit without Louvers, Windscreens, Pre-Welded Control System, Fuel System | $19,900

QUICK BUILDS AND OTHER OPTIONS (some of these are already included in the Master Kit above):

Fuselage Option: Welding of engine mounts to suit. Please contact for exact pricing | Approximately $500 to $1500

Fuselage Option: Add Front Side Door, Left Side Only | $290

Fuselage Quick Build Option: Labor to Cut, Weld, and Epoxy Prime Landing Gear Bracketry (Supplied in Fuselage Kit as Materials Only) | $990

Fuselage Quick Build Option: Labor to Weld Seats (Supplied in Basic Kit as Materials Only) | $290

Quick Build Option: Labor to Cut, Weld, and Epoxy Prime Wing Strut Bracketry (Supplied in Flying Surface Kit as Materials Only) | $1,490

Wing Quick Build Option: Wooden Wing and Landing Gear Struts, Pre-Routed | $900

Cowl Kit | $1,490 (aluminum top, side, and bottom panels with fiberglass radiator shroud that can be brass-vinyl-wrapped)

Cowl Option: Add Louvers to Cowl as Pictured (This forming process is detailed in the manual if you wish to save some money) | $490

EB Jenny Windscreens, Set of Two Flats | $100

Control System, Pre-Welded With Hardware (Control Sticks, Torque Tube, Pedals) | $990

Fuel Systems (Fuel Lines and Fittings, Fuel Tank) | $990

Extra Wide Wheel Hub Kit (for those who don't want to source a dirt bike wheel) | $590

Front and Rear Seat Harnesses, Four-Point Latch Style | $750

Option: OX-5 Dummy Engine | In the works/Contact for more info

Custom Options: please contact us if you need a customized option

Items Not Shown Above, But Needed For Completion

Engine of your choice, 75-100 hp and 135-225 lbs installed
Propeller
Instrumentation/electrical
Tires and tubes
Covering and paint

Conversion Kits (Coming soon)

The EB Jenny can also be built to approximate the Standard J-1, DeHavilland DH-4, and Laird Swallow (early). If you want to convert your kit to one of these airplanes, select your model here.

Standard J-1 | $500

DeHavilland DH-4 | $500

Laird Swallow (early) | $500

Clear selection

Customer Name, Full *

Mailing Address, Full *

Contact phone number *

Do you want to ship your sub-kit(s) or pick up locally?

Local pickup 1 hour south of Grand Junction, Colorado

Ship it and I'll call you to figure out how much that costs

Clear selection

Payment

Payments are typically made via check or wire. Credit card is fine, but we value your money as much as you do and would rather not give it to a third party. At a minimum, materials costs are due up front. The remaining cost of your options will be due before labor can begin. Paying the full amount up-front will streamline the process of manufacturing your kit. Upon submitting this form, Timber Tiger Aircraft will contact you to discuss your preferred payment schedule.

Shipping Costs

Crating and shipping costs are due just prior to crating/shipping. Price varies by shipping address. Contact for more information. Kits can also be picked up in person.

Lead Times

Current expected lead times for a EB Jenny Basic Kit are a short 8 weeks. This wait time is subject to change as orders are placed and filled. It is our hope to move projects quickly and get builders into the air.

What is the difference between Generation 1 and Generation 2 Jennies?

Gen 1 Jennies were plans-built airplanes supported by Early Bird Aircraft. The airplane was 2/3 scale. Gen 2 Jennies are kits manufactured by Timber Tiger Aircraft. They have a slightly larger fuselage at 3/4 scale, a slightly higher gross weight (Gen 1 Jennies have been operated at higher gross weights with no issues), improved hardware, improved documentation, more accurate looks, more advanced kitting, and reinforcements in key areas.

Gen 2 Jenny shown here

Submission

Upon clicking "Submit", Timber Tiger Aircraft, Inc. will send an invoice for your selected options. ONLY submit this form if you intend to place an order. Not ready to order? Contact us for more information at nick@timbertigeraircraft.com or (303) 725-5439.

A copy of your responses will be emailed to the address you provided.

Submit

Clear form

Never submit passwords through Google Forms.

reCAPTCHA

Privacy Terms

This form was created inside of Timber Tiger Aircraft, Inc.. Report Abuse

Forms