HyperBDR Checklist for Linux/Windows to Huawei Cloud - Intranet VPN Access (Object Storage)
Please make sure you can access  https://docs.oneprocloud.com/

Checklist for HyperBDR . Linux/Windows to Huawei Cloud in Object Storage Model by Intranet VPN Access: Please ensure completion of all steps before utilizing HyperBDR.
Project Name *
Your answer
1. Linux/Windows Pre-Settings Ⅰ

  • The steps in this section are not mandatory for the steps in other sections, but please ensure it is completed before the start of DR.
1.1. According to the Support Matrix, check whether the disaster recovery host meets the disaster recovery requirements.
 *
Not Ready
Completed
HyperBDR Support Matrix https://365.kdocs.cn/l/ctsKIt85ScaM
1.2. Configure Linux/Windows host time synchronization service.
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#configure-the-time-synchronization-service-for-the-source-host
1.3. Verify the time synchronization of the source Agent host with UTC.
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#verify-that-the-time-on-the-source-host-is-synchronized-with-coordinated-universal-time-utc
2. Huawei Cloud Pre-Configurations
  • Please ensure that all steps in this section have been completed before proceeding to the next steps.
2.1. Set up Huawei Cloud IAM disaster recovery account. 
 *
  • Create a Huawei Cloud IAM account according to the documentation, allocate the necessary permissions, and provide the corresponding Access Key ID and Access Secret Key.
  • Note: The Huawei Cloud IAM account is used to invoke API interfaces of the target cloud during disaster recovery (such as creating access to cloud resources and storing disaster recovery data). When setting up the IAM account, download the corresponding Access Key and Access Secret Key. Please send the account information along with the AK/SK via email.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#create-huawei-cloud-iam-account-for-dr-purpose
2.2. Huawei Cloud Quota Check. 
 *
  • Verify the remaining resource quotas under the Huawei Cloud account according to the documentation.
  • Note: During the disaster recovery process, it is crucial to ensure that the remaining resource quotas in the cloud account are sufficient to support data synchronization and disaster recovery. To prevent potential failure due to insufficient quotas during disaster recovery, it is necessary to perform a resource quota check before initiating the disaster recovery. If the remaining resource quotas in the Huawei Cloud account are insufficient, clean up unnecessary resources in the account or apply for an expansion of Huawei Cloud resource quotas.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#huawei-cloud-platform-account-quota-check
2.3. Download Windows/Linux image. 
 *
  • Windows images are primarily used for disaster recovery with UEFI Windows as the source host.
  • Linux images are used in block storage mode and serve as the base image for cloud sync gateway creation.
  • These two images serve as tools for HyperBDR and are required when configuring HyperBDR.
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.  
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#image-download
2.4. Upload and import custom Windows/Linux image to Huawei Cloud.
 *
  • After completing step 2.3, proceed this step with the work.
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.  
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#upload-image-to-huawei-cloud-object-storage https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#import-image
2.5. Create and configure VPC (Virtual Private Cloud) network and subnet. 
 *
  • Follow the Huawei Cloud documentation at Link to create a VPC (Virtual Private Cloud) network and subnet.
  • Establish your network according to the following disaster recovery network scenarios:
    1. Intranet VPN Access:
    If accessing through an intranet VPN, create a DR VPC network and place the HyperBDR ECS cloud host in this network.
    2. Disaster Recovery VPC:
    A dedicated VPC network and subnet for HyperBDR disaster recovery backup, connected through VPN to the local IDC for intranet connectivity.
    3. Business VPC:
    Business VPC network and subnet used for disaster recovery Takeover / Drill.
  • This step is essential for deploying and using HyperBDR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#configure-vpc-subnet
2.6. Create security group for disaster recovery hosts. 
 *
  • Create security group policies for the HyperBDR disaster recovery ECS (Elastic Cloud Server) host according to the documentation.
  • Security groups are primarily used during the configuration of the HyperBDR disaster recovery ECS host, allowing the necessary disaster recovery port access policies.
  • This step is essential for deploying and using HyperBDR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#create-hyperbdr-security-group
2.7. Create an ECS  instance for the installation of HyperBDR. 
 *
  • Follow the instructions in the documentation at Link to Create ECS for HyperBDR to create an ECS (Elastic Cloud Server) instance.
  • This step is essential for deploying and using HyperBDR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#create-ecs-for-hyperbdr
2.8. Disaster recovery product installation package download. 
 *
  • This step is essential for deploying and using HyperBDR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/hyperbdr-vmware-pre-settings.html#download-hyperbdr-installation-package
2.9. HyperBDR installation and deployment. 
 *
  • This step is essential for deploying and using HyperBDR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/hyperbdr-vmware-pre-settings.html#install-hyperbdr
2.10. (Option 2: Intranet VPN Access) Create and configure VPN service. 
 *
  • If your DR Environment is connected to the Intranet of the production site through Huawei Cloud, you need to purchase the Huawei cloud VPN service and configure the Huawei cloud to connect to the On-perms network.
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#vpn-setup
2.11. (Option 2: Intranet VPN Access) Create VPC Endpoint Service. https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#create-huawei-vpc-endpoint
 *
  • If your disaster recovery environment is interconnected with the production site's intranet through VPN, and the production site needs to access HyperBDR and OBS services via VPN intranet during disaster recovery, you will need to purchase and configure VPC Endpoint services on Huawei Cloud.
  • Two VPC Endpoint services need to be purchased, one for OBS and the other for DNS.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#create-huawei-vpc-endpoint
2.12. (Option 2: Intranet VPN access) Configure  the network device of the Agent host for intranet VPN access to use Huawei Cloud intranet DNS address. 
 *
  • Configure the network devices such as switches, in the the Agent host's network according to the document to add the Huawei Cloud internal DNS address.
  • If your disaster recovery environment is interconnected with the production site's internal network through Huawei Cloud VPN, after creating the VPC endpoint service, it's necessary to add Huawei Cloud intranet OBS VPC endpoint service resolution addresses to the network where the Agent host in the production site is located.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#option-2-intranet-vpn-access-configure-huawei-cloud-intranet-dns-address-for-the-network-device-where-the-agent-host-reside
2.13. Configure cross-VPC network access between the disaster recovery VPC and the business VPC. 
 *
  • During Huawei Cloud disaster recovery, when a disaster recovery host needs to be restored to the planned production business VPC, it is necessary to configure a cross-VPC peering connection in Huawei Cloud. This involves setting up a peering connection between the disaster recovery VPC and the business VPC, and adding peering connection routes. This configuration is primarily used during disaster recovery to allow the HyperBDR in the disaster recovery VPC to access the business VPC through the intranet and recover virtual machines for data recovery.
  • If all disaster recovery hosts of a customer need to be restored in different business VPCs planned in Huawei Cloud and there is a requirement for cross-VPC access, it is necessary to configure peering connections between the business VPCs. This ensures that after the subsequent business recovery, normal cross-VPC business interactions can take place.
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#create-huawei-vpc-peering
2.14. Test cross-VPC intranet network connectivity. 
 *
  • After completing step 2.13, proceed with the validation work.
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#test-the-network-connectivity-between-the-disaster-recovery-vpc-and-the-business-vpc https://docs.oneprocloud.com/userguide/poc/huaweicloud-pre-settings.html#test-the-network-connectivity-between-business-vpc
3. Linux/Windows Pre-Settings Ⅱ
  • Please ensure that all steps in Section 2 have been completed before proceeding with the steps in this section.
3.1. (Option 2: Intranet VPN Access) Test the connectivity from the Agent host to the Huawei Cloud OBS intranet network. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#option-2-internal-vpn-access-test-the-connectivity-between-the-agent-host-and-huawei-cloud-obs
3.2. (Option 2: Intranet VPN Access) Test the connectivity from the Agent host to Huawei Cloud HyperBDR Console intranet network. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#option-2-internal-vpn-access-test-network-connectivity-from-source-host-to-hyperbdr-console
3.3. Install the Agent on the source Linux host. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#install-agent-on-the-source-linux-host
3.4. Antivirus Software inspection and measureon source Windows host. 
 *
  • Please perform this step before proceeding with step 3.5.
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#antivirus-software-inspection-and-measures-on-source-windows-host
3.5. Install the Agent on the source Windows host. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#install-agent-on-the-source-windows-host
3.6. Verify that the source Agent host is registered on the HyperBDR platform. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/agent-pre-settings.html#verify-the-agent-registration-of-the-source-host
4. HyperBDR Preparation
  • Please ensure that all steps in Section 2 have been completed before proceeding with the steps in this section.
4.1. HyperBDR trial license application. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/hyperbdr-vmware-pre-settings.html#apply-for-hyperbdr-license
4.2. Configure and add Huawei Cloud Object Storage. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/hyperbdr-vmware-pre-settings.html#add-object-storage
4.3. Configure and add Huawei Cloud DR platform. 
 *
  • This step is not mandatory during the initial preparation phase, but please ensure it is completed before the start of DR.
Not Ready
Completed
https://docs.oneprocloud.com/userguide/poc/hyperbdr-vmware-pre-settings.html#add-object-dr-gateway
Get link
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. - Terms of Service - Privacy Policy

Does this form look suspicious? Report

Google Forms