OSHA Fall Protection Test

Yêu cầu quyền truy cập chỉnh sửa

JavaScript không được bật trong trình duyệt của bạn, vì vậy không thể mở tệp này. Hãy bật và tải lại.

Đăng nhập vào Google để lưu tiến trình của bạn. Tìm hiểu thêm

Full Name (First & Last) *

School Name *

1. At what height are exposed workers required to wear fall protection according to the Federal OSHA Construction Industry standard?

10 điểm

a. 4 feet

b. 6 feet

c. 9 feet

d. 12 feet

Xóa lựa chọn

2. What are the three (3) components of a Personal Fall Arrest System?

10 điểm

a. Anchor/Anchorage Connector, Body Wear (Harness) and Connecting Device (Lanyard or Retractable)

b. Body Wear (Harness), Hard Hat and Steel-Toed Boots

c. Body Wear (Harness), Connecting Device (Lanyard or Retractable) and Sturdy Ladder

d. Hard Hat, Safety Glasses and Safety Training

Xóa lựa chọn

3. A Vertical Anchor Point must be capable of supporting how many pounds per attached worker?

10 điểm

a. 300 lbs

b. 2,000 lbs

c. 5,000 lbs

d. 10,000 lbs

Xóa lựa chọn

4. When wearing a full body harness, the fall forces must be limited to a maximum of:

10 điểm

a. 900 lbs

b. 1,000 lbs

c. 1,200 lbs

d. 1,800 lbs

Xóa lựa chọn

5. Who is responsible for inspecting all components of a Personal Fall Arrest System?

10 điểm

a. Only a Competent Person

b. Safety Director

c. The person wearing the Personal Fall Arrest System

d. The Manufacturer

Xóa lựa chọn

6. A properly adjusted full body harness should:

10 điểm

a. Be loose and easy to take off

b. Fit like a comfortable jacket

c. Fit snug but allow for full range of movement

d. Fit tight to prevent slippage

Xóa lựa chọn

7. When using a 6 ft. shock-absorbing lanyard as part of your Fall Arrest System, how do you calculate the necessary fall clearance?

10 điểm

a. Height of Worker + Length of Lanyard + Distance to next level

b. Height of Worker + Length of Lanyard + Shock Absorber Deceleration/Free-Fall Distance + Three (3) ft. Safety Factor

c. Height of Worker + Distance to next level + Three (3) ft. Safety Factor

d. Distance to next level minus the Height of Worker

Xóa lựa chọn

8. After a fall, a shock-absorbing lanyard that has been deployed must be:

10 điểm

a. Inspected before the next use

b. Cut into small pieces

c. Sent back to the manufacturer

d. Taken out of service

Xóa lựa chọn

9. The maximum deceleration distance of a 6' lanyard (elongation once deployed) is:

10 điểm

a. 3 feet (36 inches)

b. 3.5 feet (42 inches)

c. 4 feet (48 inches)

d. Unlimited

Xóa lựa chọn

When using a lanyard for fall arrest, connect the lanyard to the D-ring located on the front of the harness.

10 điểm

a. True

b. False

Xóa lựa chọn

Gửi

Xóa hết câu trả lời

Không bao giờ gửi mật khẩu thông qua Google Biểu mẫu.

Nội dung này không phải do Google tạo ra hay xác nhận. Báo cáo Lạm dụng - Điều khoản Dịch vụ - Chính sách quyền riêng tư

Biểu mẫu