Request edit access
Reserve a 3D Printer at NPL
Please complete the form below to reserve a 3D printer in our Maker Hub. If a time is not reserved, then it is available for drop-in users on a first come, first served basis.

All of our regular print sessions are a maximum of 4 hour printing blocks (you don't have to use all of it!). An extra 30 minutes is added to each session for the set up and removal of the print. As a courtesy to others, your print must be completed by the end of your time. If you have a longer print, you can schedule your print on a Friday, which is our long print day.

Have questions? Please send an email to makerhub@newmarketpl.ca - we are happy to help!

Email address *
Name *
Your answer
Library barcode *
Your answer
Please watch our Introduction to 3D Printing at NPL video
I confirm that... *
Required
*
Required
*
Required
Reserve a Printer
Below you can reserve time on the Ultimaker 2+ and the Ultimaker 3 printers. You can prepare your gcode file in Cura at home or at the library. Please bring the stl file to the library (even if you created the gcode file at home), just in case there is a problem and you need to edit the print settings.
Most print times are 4-hour blocks. An extra 30 minutes is added to the block so you will have time to load and unload your filament. If you need longer than 4 hours to print, please reserve time on Friday, which is our day for long prints.
Next
Never submit passwords through Google Forms.
This content is neither created nor endorsed by Google. Report Abuse - Terms of Service