Request edit access
2020 Problem Solving Tulelake Ag Mech
Cedar Fence Problem Solving
Email address *
Contestant Namehris *
Your answer
Contestant Number: *
Your answer
Chapter Name: *
Your answer
What is the best name for the wooden members covering the bench? *
1 point
Captionless Image
How wide is each member covering the bench? *
1 point
Captionless Image
What is the overall length of the bench surface? *
1 point
Captionless Image
What is the cost (including tax at 8.75%) for the three bench surface members. Assume the douglas fir material cost is $750/M *
1 point
Captionless Image
If the wood screws attaching the bench surface are #10 x 3-1/2" how far do they penetrate, the 2x4's underneath? *
1 point
Captionless Image
If the #10 x 3-1/2" screws costs $.07 each, what is the cost of the screws fastening the bench surface(include tax at 8.75%)? *
1 point
Captionless Image
If the price of Douglas fir 4x4 is $.80/bd-ft, how much will the post cost (including tax at 8.75%)? *
1 point
Captionless Image
How long are the short 2x4? *
1 point
Captionless Image
How high is the bench surface from the floor? *
1 point
Captionless Image
How long are the longer 2x4's? *
1 point
Captionless Image
The total length of the fence is 40'. How many S4S fence boards would be required? *
1 point
Captionless Image
How man 20' lengths of C4 x 5.4 are required *
1 point
Captionless Image
The local steel yard has the following lengths of W8x 31 available are rems (remnants). Which one below is the cheapest and will still suffice? *
1 point
Captionless Image
What are the dimensions of the 1/4" Plate? *
1 point
Captionless Image
How many 5/8" NC Flathead Socket Cap screws are required? *
1 point
Captionless Image
How heavy is a 10' piece of the W8 x 31? *
1 point
Captionless Image
How heavy are (2) 20' pieces of C4 x 5.4? *
1 point
Captionless Image
What is the cross sectional area of the hydraulic cylinder's piston (bore)? *
1 point
Captionless Image
At what angle is the mitered end of the W8 x 31 cut? *
1 point
Captionless Image
If an 8" tall item is shown on a drawing with a (1"=1') scale, how large would it be on the paper? *
1 point
Captionless Image
If the hydraulic pump can deliver 2000 psi (pounds per square inch), how much force can be delivered by the hydraulic cylinder? *
1 point
Captionless Image
For a 40' long fence, how many fence posts would be required? *
1 point
Captionless Image
How many board- feet are in each post? *
1 point
Captionless Image
What size/ kind of nail should be used to fasten the top runner to the fence post *
1 point
Captionless Image
Assuming the current price of pressure-treated 4x4 is $800/ M, determine the cost of 5 posts (including tax) *
1 point
Captionless Image
What is the volume of concrete required for each fence post? *
1 point
Captionless Image
If the fence posts are spaced 8' on-center, how long are the 2x4 stringers? *
1 point
Captionless Image
At Home Depot, 8d hot dipped nails are available in 1lb, 5lb, and 10lb boxes. If there are approximately (140) 8d nails per pound, how many boxes would be required for fastening the fence boards *
1 point
Captionless Image
Submit
Never submit passwords through Google Forms.
This form was created inside of Tulelake Basin Joint Unified School District. Report Abuse