Material Data Safety Sheet

1. Chemical Product

Eyelash Extension Adhesive: Sweet Lash (Clear Eyelash Glue)

2. Composition/Information on Ingredients

Ingredient relative%

Cyanoacrylate <95%

Polyalkyl Methacrylate <10%

Poly Isocyanate <10%

Others, <5%

3. Hazards Identification

This product is a colored, solvent borne cyanoacrylate/cyanomethacrylate glue.

Inhalation: vapor can cause headache, nausea, irritation to nose, throat and lungs. Use in ventilated area.

Eye: contact with vapor or liquid may irritate eyes.

Skin: Slightly irritating to skin.

Ingestion: May cause pain, nausea and vomiting.

4.First Aid Measures

Inhalation: Remove victim to fresh air. Provide oxygen if breathing is difficult.

Give artificial respiration if not breathing. Get medical attention immediately.

Eye Contact: immediately flush eyes with water for 15 minutes. If symptoms develop, see a physician.

Skin Contact: Remove contaminated clothing and wipe excess from skin. Wash exposed area with soap and

water. If redness, itching or burning sensation develops, see a physician.

Ingestion: although highly unlikely, seek immediate medical attention.

Note to Physicians: none for this material

5. Fire-Fighting Measures

Extinguishing Media: Dry chemical carbon dioxide, foam or spray as appropriate for surrounding fire.

Fire-Fighting Instructions: Do not enter enclosed or confined fire space without full protective equipment, including

self-contained breathing apparatus to protect against the hazardous effects of combustion products

and oxygen deficiency.

6. Accidental release Measures

Large and Small Spills: Dike and absorb with inert material. Remove all material with use of a vacuum system

or scoop and contain properly for appropriate disposal. Keep spillage and cleaning runoff out of municipal

sewers and open bodies of water. Decontaminate clothing and spill area with detergent and large amounts of


7. Handling and Storage

Keep from freezing. Keep container tightly closed. Containers (even empty) will retain product residue vapors

and are subject to proper waste disposal.

8. Exposure Controls/Personal Protection

The use of gloves impermeable to the specific material advised to prevent skin contact and possible irritation.

9. Physical and Chemical Properties

Physical State: liquid pH: N/A Water solubility: N/A (polymerizes) Boiling Point: 100 degrees C

10. Stability and Reactivity

Hazardous Decomposition Products: Thermal decomposition may yield acrylic monomer, carbon monoxide

and carbon dioxide. Unidentifiable organic compounds in fumes and smoke may be formed in combustion.

11. Disposal Considerations

Disposal: Dispose of unused or contaminated product and materials used in cleaning up spillage in a manner

approved for this material. Consult appropriate regulatory agencies to ascertain proper disposal procedures.

Material Data Safety Sheet

1. Chemical Product:

Adhesive Gel Remover: Sweet Lash Gel Remover

Organic Solvent

2. Composition:

Component   CAS NO.   % by weight (relative)

Gamma Butyl acetone  96-48-0   <80

Dimethylketone  67-64-1   >20

N-Methyl-2-Pyrroldone         872-50-4   >5

Antibiotic Materials  N/A    >0.5

3. Hazards Identification

Potential Health Effects

Eye:  May cause irritation. Symptoms may include stinging, redness, irritation.

Skin:  May cause irritation. Symptoms may include irritation, redness, burning sensation.

Ingestion: May be harmful if swallowed. May cause digestive tract disturbances.  

              The toxicological properties of this substance have not been fully investigated.

Inhalation: Breathing large amounts of this substance may cause respiratory tract irritation.

Chronic: No information found.

4. First Aid Measures

Eye Contact: Flush with water

Skin Contact: Flush with soap and water

Ingestion: If victim is conscious and alert, give 2-4 cupfuls of water or milk. Seek medical attention.

Inhalation: Move individual to fresh air. If symptoms persist, seek medical attention.

Notes to Physician: Treat symptomatically and supportively.

5. Accidental Release Measures

Spills/Leaks: Absorb spill with inert material (i.e. vermiculite, sand, earth) and place in suitable  

                  container. Clean up spills immediately. Provide ventilation.

6. Handling and Storage

Handling: Keep away from heat, sparks and flame. Wash thoroughly after handling. Remove  

             contaminated clothing and wash before reuse. Use with adequate ventilation.

Sorage: Keep container tightly closed when not in use. Store in a cool, dry, well-ventilated area away    

  from incompatible substances.

7. Physical and Chemical Properties

Physical State:  liquid   Color:  clear   Odor:  faint, stimulative

Boiling Point:  90 degrees C  Solubility in water: miscible Specific Gravity/density:  1.02g/cm3

8. Stability and Reactivity

Stable under normal use and conditions.

Avoid contact/proximity to incompatible materials– strong acids, bases and reducing agents.

Hazardous Decomposition Products: carbon monoxide, irritating/toxic fumes, carbon dioxide

Hazardous Polymerization: has not been reported

9. Toxicological Information

Butryolactone-IARC: Group 3 carcinogen

No information available re: epidemiology, neurotoxicity, reproductive effects, mutagenicity, etc.