Tut: Programming Wiifree under Windows XP with JDM or cheap pro... http://www.ps2-scene.org/forums/wiifree/53425-tut-programming-wiifr...

Programming Wiifree under Windows XP with JDM or cheap programmer.

- Copy icprog.sys to same destination as Icprog.exe - Start icprog.exe -> if you get an error just ignore this - Go to "Settings" then "Options" then "Programming" - Check "Verify during programming" - Go to "MIsc" and check "Enable NT/2000/XP Driver" and restart ic-prog - Go to "settings" then "hardware" and check if you choose "JDM Programmer" and com1 - Select "PIC12F629" in upper right drop-down box. - Open Wiifree HEX and then you can programm it to PIC. - when pop-up "OsCCAL = 3428h Do you want to use value from file (3FFFh) instead?" press "NO"

Good luck!

This setup works 100% for me, If I wrote something wrong please feel free to correct me.

P.s. thanks for sharing wiifree and thanks to Bonny Gijzen for IC-prog

Attached Files

1 of 1 08/04/2007 11:50

icprog105D.zip (554.7 KB, 672 views)