Published using Google Docs
#New Pass Admin Guide_Primary
Updated automatically every 5 minutes

Pass Mobile App

Most Recent Version:

iOS - 1.2.0 (312)

Android - 1.2.0 (312)

The Pass Administrator Guide contains instructions that will guide Admins through the Pass setup and configuration process.  It is also a general reference tool for all functionality available to those with the “Admin” user role in Pass.   For basic operation of your Pass system, please reference your Pass Teacher/Staff Guide.

The Table of Contents below is organized to follow the Control Panel menu tabs found in the Pass system.  Each topic / subtopic is hyperlinked to the specific section of the Pass Admin Guide, where you will find relevant and necessary information to assist you in the setup and management of your Pass system. The Miscellaneous section contains additional information that you may find helpful as you build and understand the system.  If you have any questions, please contact us through the Pass Help Desk Portal: https://support.securly.com.

Table of Contents

     Click on the hyperlinked title or use “Ctrl+F” or “Command+F” to search the document by keyword(s).    ).          

Getting Started

Logging In

Profile Settings

Admin Training Checklist

Teacher/Staff Training Checklist

Control Panel Settings

District & School Insights

Reports

Tardy Settings

Visitor Settings

Queue Settings

Behavior Management

Limits

Users (User Management)

System Settings

Modules

File Uploads

Retained

Help Desk

Miscellaneous

Technical Info

Training Resources

Additional Information

Expanded Table of Contents

GETTING STARTED

As mentioned above the “Getting Started” module is designed to guide you through the necessary items that must be addressed in order to set up and customize your Pass system. Your Project Manager (PM) can help you identify which steps you need to complete in order to prepare your Pass system for training and general use.  There may be some features or modules in the system that your school chooses not to use, which means you can skip these sections.  

VIDEO ALERT:  

Please watch the “Control Panel Overview” video found on the Pass Training Video Index (Admins).

Logging In

Your PM will provide you with detailed instructions to log into your Pass system for the first time.  Most likely you will be using your school email and corresponding password (for your school’s authentication type).  The general Pass URL is pass.securly.com/login, which then provides login links for various types of authentication, such as Google, Clever, etc.  

 

The chart below provides direct URL links for various types of login methods.  These direct links save users a step in the login process. This may especially be helpful if your school pushes the URL link out to users and/or creates shortcuts.

Direct URL

User Login Type

https://pass.securly.com/login

Manual

https://pass.securly.com/glogin

Google

https://pass.securly.com/clogin

Clever

https://pass.securly.com/ologin

Microsoft O365

https://pass.securly.com/classlinklogin

ClassLink

VIDEO ALERT:  

Please watch the “Accessing the System” video found on the Pass Training Video Index (Admins).

Return to Table of Contents

Profile Settings

My Profile

My Locations

My Profile - As an Admin, you can update your profile at any time.  From the dashboard, click the gear icon underneath the name of your school.  

On the Profile Settings page, you can make adjustments to your profile (My profile) and/or associate yourself with locations (My locations) in your building.

To make adjustments to your profile, click the gear icon underneath the name of your school, click My profile, and make any adjustments necessary to your profile settings.  The following items can be adjusted on this page:

Please see the screenshot below for more details.  (Teachers and Staff will also need to update their Pass Profile Settings once they log in.)

REMEMBER:

If you happen to choose a PIN that is being used by someone else, you will receive the following message:  “Error - Unable to update profile. PIN already assigned to another adult.”

My Locations - Any adult can associate with a location.  Once associated with a location(s), passes created to that location will appear on your Dashboard.  To associate with a location, click the gear icon below the name of your school and click My locations.  On the popup in the Add location field, (1) type the name of the location OR (2) click in the Add location field and then scroll down the list and click on the desired location.

If the Auto Check-in module (Modules tab in the Control Panel) is enabled, you can assign that location a Check-in PIN that students’ will enter on their device when they enter that location.  To add a location PIN, click the Edit pencil, click in the PIN field, and add the PIN.  Then click Save changes.   

My locations - Setting an Auto Check-in PIN

Student’s Device using the Check-in PIN

REMEMBER:  

You can update your Profile Settings at any time.

Return to Table of Contents

Control Panel

District & School Insights  

         

          Advanced Reporting

          Scheduled Reports

Advanced Reporting

With this reporting feature, admin users are able to get a snapshot of Pass usage and trends in their school and/or across their district if they have membership in those schools.

IMPORTANT NOTE:

If you need to add/roster district admin to your school, please click HERE for those details.  

REMEMBER: 

  • Information will not be updated in real time. All data will be from yesterday and before.
  • These reports are compiling large amounts of data. Please be patient and allow your report time to load and display.

To access the District & School Insights tab, under the Control Panel, click Reports → District & School Insights.

Using the School dropdown menu, admins can choose to view data from one school or multiple schools (as long as they have membership in those other schools).  Click Apply once the school(s) is/are chosen.

One School Chosen

Multiple Schools Chosen

The first three graphs are static and provide an overview of Pass usage within a school/district:

User Roles and % Logged In

Admin can see the total number of users shared by role (Admins, Teachers, Staff, Students) and percentage of those who have logged in.

School Year Pass Breakdown

This chart shows how different pass types are being used throughout the year. An admin will see if all pass types are being used and how much each pass type is being used in relation to the other pass types. A school/district could have zero or very low usage of a particular pass type based on a school system's configuration or utilization.  (Hover over the different sections to see the specific number of passes for that pass type.)

School Year Pass Trend Chart

The School Year Pass Trend Chart compares pass usage month by month, this year versus last year.

Specific School/District Pass Data

To dig even deeper into your school's/district's data, you can choose a specific date range. You can also select which Data Points to include on your District & School Insights page.

Under the School Year Pass Trend chart, click the date field and choose the desired date range. To the right, click the four (4) squares to personalize your data dashboard with the desired Data Points.

Date Range

Data will be displayed as follows:

  • Previous Day - Using hours of the day (default)
  • This Week - Using days of this week
  • This Month - Using days of this month
  • This Year - Using months of the school year
  • Custom Range

Personalize Dashboard

Customize the Data Dashboard by selecting which charts to display and in which order.

  • Select All Charts to be displayed

OR

  • Check the boxes of the individual charts

  • To move the order in which the charts are displayed, click on the dots to the left of the chart and move it to the desired position.

  • Click Restore Default or Save when finished

 

Pass Breakdown - Shows an admin if all pass types are being used and how much each pass type is being used in relation to the other pass types during the specified date range. A school/district could have zero or very low usage of a particular pass type based on a school system's configuration or utilization.

Pass Trend - Highlights daily pass activity for the selected time period.

Most Passes Granted By Schools  - Compare pass usage across different schools.  Click Table View to see more detailed information.  (The names of the school(s) selected will be displayed on the chart.)

Most Passes Taken - Shows which students (top 5) are taking the most passes.  To see the names of these students, click Reveal Names.  Click View More to see a listing of the top 20 student pass takers.

Top Five Students

View More

Most Passes Granted - Illustrates which adults (top 5) are granting the most passes.  To see the names of these adults, click Reveal Names.  Click View More to see a listing of the top 20 adult pass granters.  (This data will include any adult who interacted with a pass, NOT just the adult who activated the pass.)

Top Five Adult Pass Granters

View More

Tardy Infractions - Tracks tardies over time, including late passes.

Pass Breakdown by Graduation Year - Shows pass usage by graduation year.

Most Frequented Locations - Displays which locations students visit most often.

Top Five Locations

View More

Average Pass Duration - Shows the average length of time for each type of pass.

Contact Control - Illustrates prevented interactions between students who should be kept apart.

Visitors Trend - Tracks the number of visitors over time.

Zero Granters - Shows adults who haven't granted any passes.

QUICK TIP:

Based on what the data reveals, admins can make adjustments in their Pass system to school-wide limits, certain locations, or specific students.

Export Options

Admin have three (3) different export options to share Pass data, and they live in the top right corner of the District & School Insights page.

Download Report (CSV format)

When the Download Report option is clicked, a Download Report popup will appear where an admin can check the boxes of the data points to be downloaded.  When finished, click Download.

The files of the selected data points can be found in your Downloads folder on your computer.

Email Report

When the Email Report option is chosen, an admin can then select the data points and click Send to Email. Those selected files will then be emailed to that user’s email address, as listed in Pass.

 

Scheduled Report

The Scheduled Report option allows an admin to schedule the selected data points to be emailed to them at the chosen frequency until the selected end date.

To schedule a report, click the gear icon.  On the popup screen, an admin can select from the following options:

Click OK when finished.

Return to Table of Contents

Reports

Summary Reports

        Now Reports

        Background Reports

Meet-up Report

Pass Totals

Summary Reports

Summary Reports provide Admin users with aggregated data about their school's overall system usage.  These reports can be run for Locations (pass destination), Adults (pass granters), or Students (pass takers).  

Now Reports

Using the Now Report is a quick way to see high-level information about pass locations/destinations, pass granters, and pass takers. The time frame for a Summary Report will default to today’s date, but the date can be adjusted and the data can be filtered and sorted as needed.

From the Control Panel menu, click on Reports → Summary Reports.

Click Choose One.  From the dropdown menu, select the report that you would like to run:

Once the report has been selected, choose your search parameters (filtering options):

QUICK TIP:  

You can start by selecting your report and date range, running the report, and then adjusting the other parameters as needed.

When all of your parameters have been selected, click Search.  Your results will appear on the screen. To alter the parameters, adjust the dropdowns and click Search again. To perform another search, click Clear all, redefine your parameters, and click Search.

The search results on the bottom half of the screen show total passes by destination or name, total number of passes, total amount of instructional time that has been missed, and then time out of the classroom per different pass types.

Locations (pass destination): This will show how many passes have been written to each location. This data will not include passes to individuals and may therefore differ from other reported numbers.

Adults (pass granters): This report will provide a list of adults and the number of passes they have interacted with. The data will include passes on which they have used their PIN, passes that they approved on their dashboard, and Auto Passes that were created by students from that adult.  (It will NOT include specific PIN usage data, though.)

Students (pass takers): This will generate a list of students who have used Pass and how many passes they've taken. This includes all types of passes except for Missed Appointment Passes.

When searching for Students (pass takers), you can also include the Student Number, if desired.

Finally, you can download this information for any reason simply by clicking on the download icon in the upper right corner of the screen.

Return to Reports

Return to Table of Contents

Background Reports

Admins can also run Background Reports. These are larger reports that contain more data than a standard report can quickly display.

To run a Background Report, select Background Reports, choose one of the three report options -  Locations (pass destinations), Adults (pass granters), or Students (pass takers) - choose the date range and any other parameters that need to be set, and click Create.

Once you click Create, on the table below, you will see the report that is being generated.  On the right side of the screen under the Status column, you will see the status Processing, which means the report is running in the background and can be downloaded later. You will get an audible sound notification (if sound is enabled on your browser and in Pass) when the report is ready to be downloaded.  Click on the Notification Bell in the top right corner to get the status of the report.

Notification Bell and Message

When ready, you will see the Processed status, and the report is ready to be downloaded.  Click on the three(3) dots under the Action column and click Download.

With the report downloaded, you can then manipulate, sort, and/or print the report as needed. (Color and boldfacing added for display purposes only.)

Once the report is processed, in addition to the Download option, you also have these three options:

  • Rerun - Once a report has been processed, it is available to download for one calendar year. You can rerun the report and download as needed.

  • Duplicate - This option will pre-fill the report fields with the information from this current report. You can then modify and update the parameters and click Create to run the report. 
  • For instance, if you run the following report on October 1st - Background Reports → Locations (pass destination) → Time frame (07/01/2024-06/30/2025) - you will get all of the data for your locations from the beginning of school through September 30th.  If you duplicate the report at the end of each subsequent month, you will get all of the data on your locations from the beginning of school through the end of that particular month. (July-Oct, July-Nov, July-Dec, etc)  Once downloaded, you can sort, manipulate, and/or print the results as needed.
  • Delete - If your reports list is too large, you can choose to delete reports at any time.  Any Admin can delete any report; be sure to check with the “Requested by” individual before deleting their report.

Return to Reports

Return to Table of Contents

Meet-up Report

This report allows you to identify how many times a specific student (Student A) has been on a pass simultaneously with other students. Any students who were on a pass at the same time as Student A in the given date range will be shown on the list. There is a column that will show how many times they have had overlapping passes. If the students shared a starting location or a destination, that will be indicated with a "yes" in the last column.  If further research is needed, the History screen will provide details of dates, time, locations, etc.

To gather information about a student possibly meeting up with another student, click on Meet-up Report.

Click Student and select the name of the student from the drop-down menu OR type the name of the student.  Click in the date field and select the date range.  Then click on the blue Search button.

Your Meet-up data will appear in the table below. You will see how many times that student has had overlapping passes with other students.  The last column shows whether or not the students have shared a departing location or a destination.  (If the number of overlapping passes is relatively high and there is a shared location, that likely indicates a meet-up situation.)

To add the Students’ ID number to your data report, click the Columns icon and check the Student ID box.  The students’ ID numbers will appear to the left of their names.

If need be, you can download the data to a CSV or an Excel file OR print the info.

You also have the ability to sort and/or search the columns as needed.

Return to Reports

Return to Table of Contents

Pass Totals Report

Admins can run a Pass Totals report that displays the total number of passes and the totals for each pass type for a specified date range.

From the left navigation menu under the Control Panel, click Reports → Pass Totals.  

Choose the school year and the date range desired from the dropdown boxes for the report.  (The current school year and today’s date will be the defaults for these parameters.)

Click Submit.  (Depending on the size of the report, it may take time before the report is ready.)  You can navigate away from this page while the report is created. When the report is ready, a green “New” icon will appear on the Pass Totals tab on the left menu.  Then click Reload.  The report will be displayed on the table.

 

The Total Passes, along with the pass type totals, for the specified date range will be displayed. If the end date for the date range is today or in the future AND passes have occurred after the report has been run, you can Re-run the report to get the updated totals.  You can also download the report as needed.

Re-run Report

If the end date for the date range is today or in the future AND passes have occurred after the report has been run, you can Re-run the report to get the updated totals.

When downloaded, the name of the file will include the name of the school as well as the date range of the report.  (The columns of the report below have been modified for easier viewing.)

Return to Reports

Return to Table of Contents

Tardy Settings

This feature will assist school Admins in seeing Tardy trends both with students arriving Late to School (LTS) and Late to Class (LTC).  You will be able to track these infractions in different ways, as well as create separate consequence ladders.  Click on the link below to access the Pass Tardy Management Guide.

Pass Tardy Management Guide - Admins

Return to Table of Contents

Visitor Settings

Visitor Management is designed to help admins streamline guest check-in, validate visitor identities, and keep the school campus safe.  Click on the link below to access the Visitor Admin Guide.

Visitor Admin Guide

Return to Table of Contents

Queue Settings

        Auto Queue Clearing

        Enable Queue for Locations

                Set Queue Location Limits

On the Queue Settings page, admins can set up automatic Queue Clearing Times (not required for queues to function in the school) and select Queue Locations for which queues will function.

Add Auto Queue Clear Time

Adding Clear Times will clear all queues at the times selected for the specified locations included in Queue Management. (You can choose to clear the Queues manually, if you choose not to set any Auto Queue Clearing Times.)

IMPORTANT NOTE:

  • At the Clear Times listed in Queue Settings, the queues for your specified locations will be cleared automatically.
  • Click the Clear Queue button, if you need to clear the Queue prior to the clear times listed in Queue Settings, and Confirm your action.

To add a queue time, follow these steps:

  1. Under the Control Panel, click Queue Settings.
  2. Click Enter label for selected time and type the label for this Clear Time (Period 1 End Time, End of Block 3, etc.).
  3. Click Enter Clear Time. In the dropdown, select the desired Clear Time
  4. Under Recurrence, select the day(s) on which to clear the queue at this time.
  5. Click Add to List. (The Clear Time will be displayed on the right side of the screen.)

Repeat these steps to add the Clear Times that are needed for your school (i.e. - regular bell schedule, A/B block schedules, 2-hour delay schedule, flex period schedule, etc.).

Once the Clear Times have been created, you can manage them using the icons and toggle switch to the right of each Clear Time.

To edit a Clear Time, click the Edit icon to the right of that Clear Time (1), make the appropriate changes on the left side of the screen (2), and click Save Changes (3).

To delete a Clear Time, click on the Trash icon to the right of that Clear Time and click Confirm on the popup. The Clear Time will disappear from the list of Clear Times.

To turn off all Clear Times, click on the toggle to the right of “Switch off all”. To make them all active again, click on the toggle to the right of “Switch on all”.

To turn off specific Clear Times, click the toggle(s) to the right of those specific Clear Times. To turn those specific Clear Times back on, click on the appropriate toggle(s) again.

Return to Queue Settings

Return to Table of Contents

Enable Queue for Locations

All of the locations listed in your Pass system are eligible for Queue Management; however, you will need to select the locations that will allow students to “wait in line” for a pass AND set limits for those queue locations.

To select locations, on the Queue Settings page, scroll to ENABLE QUEUE FOR LOCATIONS. You can enable all locations (click on the toggle for Switch on all), or you can click on the toggle of individual locations (click on the toggle for each location desired). Use the Search box to quickly find a location.

Set Queue Location Limits

Using the list of Queue Locations:

Edit a Location

Add a Location

Return to Queue Settings

Return to Table of Contents

Limits

Admins can use the data found in Pass Reports to create pass limits for the building, students, and/or locations.  Using the Pass Blocking functionality allows admins to block passes for all users for a specified period of time, including daily and weekly blocks.

Limit Student Pass

          Editing / Deleting Student Limits

          Copying Inactive Limits to

                    Upcoming School Year

Limit Location Max Cap

Limit Active Pass

Limit Location Availability

          Copying Inactive Location

                    Availability Limits to  

                    Upcoming School Year

Contact Control (A/B Polarity)

Pass Blocking

          Implementing a “10/10” Rule

The Limit options can be accessed from the left menu under the Control Panel or from the Create button found in the upper right corner of the screen.

Left Menu

Create Button

Return to Limits

Return to Table of Contents

Limit Student Pass

Limit Student Pass provides an Administrator with the ability to set limits on the number of student-created passes.  Teacher-created passes and appointment passes DO NOT count against a student’s pass limit.)

To add a limit, click on the blue Create button in the upper right corner of the screen and select the Limit Active Pass option and complete the fields; or from the Control Panel menu, click on Limits → Limit Student Pass.  On this screen, click the blue + Limit button in the upper right corner and complete the fields.  When finished, click the blue Create button.

QUICK TIP:  

When choosing your student, the multi-select dropdown will allow you to select one or more students at a time.

To add a student's name:

Limits → Limit Student Pass

Adding a Pass Limit:

Pass Limits can be set for the following:

  1. All Students - A limit is set for all student users.
  2. Selected Students - A limit is set for specific student(s), who are added to the system individually by searching the student name.
  3. Grad Year Students - A limit is set for all students of a specific Grad Year, if Grad Year is being sent/included to Pass for each student.
  4. CSV Student List - A limit is set for all students included on a CSV file, which is uploaded to the system. (The file only needs to contain a list of the student email addresses.  There is a sample file available for download once this option is selected in the system.)

If you choose to upload a CSV Student List, you can easily track the status of that file on the Limit Student Pass page.  In the upper left corner of the page, click Files.  The file name, status, and the date the file was uploaded will be displayed.

Searching for specific students

If you have a large number of students who have limitations, you may find the Active/Inactive tabs, Search window, filter (select Group Limits, Individual Students, and/or Student Number and then click the blue Filter button), and column sort/search functionalities beneficial.

To search for a specific student, under the “Student” column, click in the Search by name field and type the name of the student.  Utilize one of the following search parameters:

Return to Limits

Return to Table of Contents

Editing / Deleting Student Limit Entries

Once a limit has been set, it will show in the list on the Limit Student Pass screen.  Admins can make changes to an active limit by clicking on the three (3) dots to the right of the limit and choosing the appropriate option - Edit or Delete.

To Edit a specific student pass limit, click the three dots to the far right of the student’s name and click Edit.  On the popup screen, make the appropriate changes and then click Update.  (Info that is grayed out cannot be edited.)  The change will be reflected in the table.

To delete student pass limits, admins have two options: delete individual entries or bulk delete entries.

Delete individual entries:  Click the three dots to the far right of the student’s name and click Delete.  On the popup screen, click Confirm.  The entry will be deleted from the table.

Bulk delete entries:  Check the boxes to the left of the students’ names that you wish to delete and then click Delete to the right of Bulk actions under the Active/Inactive tabs. On the popup screen, click Confirm.  The entries will be deleted from the table.

QUICK TIPS:

  • If a student has two weekly limits (a school-wide daily limit of 2 and a personal daily limit of 10), the system will recognize the most restrictive limit. The student will only be allowed to create 2 passes a day. Same logic works with two weekly or two monthly limits.

  • Stacking the limits (creating daily, weekly, and/or monthly limits) for a student is currently not available in the Pass system.

VIDEO ALERT:  

Please watch the “Setting Student Pass Limits” video found on the Pass Training Video Index (Admins).

Return to Limits

Return to Table of Contents

Teacher Screens:

When a student creates a pass but has a limit set, the teacher may not know this based on the active dashboard.  The dashboard shows the teacher how many passes the student has used that day but not if there’s a limit set or what the limit is.  Teachers will need to be aware of this in case students say to them that they can’t create a pass.  (Please see the student screen example in the next section.)

The Teacher (Admin or Staff user) is still able to create a Teacher Pass or Appointment Pass for students who have used their limited number of passes.  If a Teacher creates a pass for a student with a limit, the teacher will see the following information on the Teacher Pass screen regarding the student’s pass limit.

REMEMBER:  

Please note that “Today’s Passes” indicate ALL Pass types.

Student Screens:

When a limit has been set, below is what a student will see when creating a pass.

Below is what a student will see when they attempt to exceed the set limit.

 

Return to Limits

Return to Table of Contents

Copying Inactive Limits to Upcoming School Year

Admins have the ability to copy inactive student pass limits to the upcoming school year, eliminating the need to re-create those same limits each year.

To copy specific student pass limits, under the Control Panel, click Limits → Limit Student Pass.  On the Limit Student Pass page, click Inactive.  All of the previous limits will appear.

Click the box(es) to the left of the entries that need to be copied to the current school year.  Then click the Bulk actions button: Copy to Current School Year.  On the popup that appears, adjust the dates of these limits as needed and then click Submit.  The selected student pass limits will become active limits for the current school year.

Return to Limits

Return to Table of Contents

Limit Location Max Cap (Location Limit)

Limit Location Max Cap allows an Admin to limit how many students a specified location can accept.  Admins, teachers, and staff members can initiate setting this limit, from their Pass dashboards, for locations with which they are associated in their “My locations” section of their Profile Settings.  (More info is shown below.)

In addition, an Admin can click on the “Limit Location Max Cap” menu to view or set limits for rooms with which he/she may not be associated with or to which no one would be associated.  (This can also be accessed from the blue “Create” button.)  The following screen appears where the Admin can set a max capacity limit for any location that is already created in the Pass system.

To create a limit, click on the blue Create button in the upper right corner and select the Limit Location Max Cap option, OR under the Control Panel on the left menu, click Limits → Limit Location Max Cap → blue + Limit button in the upper right corner.

On the white popup screen, type in the desired limit for that location, click Select locations, and use the multi-select dropdown to select one or more locations at a time.  To add a location, click in the Select locations field, type the name, or scroll for the name, of that location.  Click on that location.  If other locations are needed, type or search for those locations and click on those locations to add them. When finished, click Create.

The Location Max Capacities will show on Admin, Staff, and Teacher Pass dashboards for the rooms/locations with which that user is associated in their Profile Settings → My locations.  Users linked to a location (in their Profile Settings) can click on Room Capacities on the dashboard and edit the location max capacity setting, as shown below.

Students will not be able to create a pass to a location that has reached its max capacity limit.  They will receive a message letting them know this limit has been reached.

Teachers who are creating a Teacher Pass for a student and the location has reached its max capacity limit will receive the following message.  Teachers can choose to activate the pass (or not) in this situation.  

VIDEO ALERT:  

Please watch the “Setting a Limit Location Max Cap” video found on the Pass Training Video Index (Admins).

Return to Limits

Return to Table of Contents

Limit Active Pass (Building Limit)

This limit allows an Admin to set how many passes can be active at one time in the building.  The Admin specifies which pass types count towards the active pass limit, such as Student (STU), Teacher (TCH), and Kiosk (KSK).  Appointment Passes cannot be included in this limit.  By default they will take place regardless of this limit setting.

The active pass limit shows on all Teacher, Staff, and Admin Pass dashboards; but only an Admin can adjust the limit.  When a pass is initiated and the limit has been reached, the following message appears to the user:  “Hall traffic limit reached. Please try again later.”   Please see below for additional details specific to each user role.  

Administrator

Below is where the Active Pass Limit shows on all Pass dashboards.  An Admin user can click on this to adjust the limit settings, as shown below.

Admins can also access the active pass limit settings from the Create button on the top menu bar and from the Control Panel menu as shown below.  

At the following screen, an Admin enters the active pass limit in the Set Limit field and selects which types of passes should be included - STU passes, TCH Passes, and/or KSK passes.  In addition, when including Teacher passes, the Admin can select whether or not to allow teachers to override this limit.  (Toggle to the right to allow teachers to override the limit; toggle to the left if teachers are not allowed to override the limit.)

Teacher/Staff

Teachers and Staff members will be able to see the Active Pass Limit on their dashboard once this has been set by an Admin.  They can click on this to see the details but cannot make changes.  

When there is no Active Pass Limit set, the dashboard will show a dash in this area, as shown below.

QUICK TIP:

  • It is also possible to set the limit to equal “0”, which will slow down or stop the traffic in your hallways.  Appointment Passes and any pass types that were not included in the limit may still take place.

It is also possible to set the limit to equal “0”, which will slow down or stop the traffic in your hallways.  Appointment Passes and any pass types that were not included in the limit may still take place.  

Teacher Pass - Here is what a teacher or staff member will see when attempting to create a Teacher Pass (if this type of pass is included) when the Active Pass Limit has been reached:

Student Pass - When a student initiates a standard pass or a pass in Kiosk mode, below is what they will see when the Active Pass Limit has been reached:

Standard Pass

Kiosk Mode Pass

VIDEO ALERT:  

Please watch the “Setting the Active Pass Limit” video found on the Pass Training Video Index (Admins).

Return to Limits

Return to Table of Contents

Limit Location Availability (Location Restriction)

The Limit Location Availability feature allows Admins to set up “Access Denied” or “Members Only” locations for students.  The settings screen shown below can be accessed from the Pass Limit / Blocking  menu or from the blue “Create” button.  

To create a limit, click on the blue Create button in the upper right corner and select the Limit Location Availability option, OR under the Control Panel on the left menu, click Limits → Limit Location Availability → blue + Limit button in the upper right corner.

On the popup screen, complete the following fields:

Click Create when finished.  The limitation will appear on the screen.

Once a Limit Location Availability has been added to the system, Admins can view and manage (End or Delete) these limits.  To End or Delete a limit, click on the three(3) dots to the right of the limitation and make the appropriate choice.  If you have a large number of students who have limitations, you may find the Active/Inactive tabs, Search window, filter (select Student Number and then click the blue Filter button), and column sort/search functionalities beneficial.

Access Denied Information

If a student misbehaves in a certain location or otherwise needs a restriction, you can set up an “Access Denied” limit for that student.  The student will have a notification on their Pass screen that they have a location restriction, but it will not specify what location.  (See the example below.)  The “Access Denied” location will not appear in that student’s “Destination” drop down list.  A student with a location restriction could still be given a Teacher Pass by a Teacher or Staff member to that location, but there is an alert on the Teacher Pass for the teacher or staff member.  (This is also shown below.)

Members Only Information

Conversely, you can set up a room as a “Members Only” and give students access to the location for a set date range.  This might work well for Off Campus Lunch, Stretch Break (for IEP or other exceptional students), certain bathrooms, etc.  Only students who are given membership to this location will have this option in their “Destination” drop-down list.  It is also important to note that if a room has been used for “Members Only" but currently has no members (students attached to that room), then it will appear to all students.

VIDEO ALERT:  

Please watch the “Setting a Limit Location Availability” video found on the Pass Training Video Index (Admins).

Return to Limits

Return to Table of Contents

Copying Inactive Location Availability Limits  to Upcoming School Year

Admins have the ability to copy inactive location availability limits to the upcoming school year, eliminating the need to re-create those same limits each year.

To copy specific location availability limits, under the Control Panel, click Limits → Limit Location Availability.  On the Limit Location Availability page, click Inactive.  All of the previous limits will appear.

Click the box(es) to the left of the entries that need to be copied to the current school year.  Then click the Bulk actions button: Copy to Current School Year.  On the popup that appears, adjust the dates of these limits as needed and then click Submit.  The selected student pass limits will become active limits for the current school year.

Return to Limits

Return to Table of Contents

Contact Control (A/B Polarity)

Contact Control allows an Admin to keep pairs of students from being out of the classroom on an active pass at the same time.  An Admin can access the settings screen from the blue Create button in the upper right corner and selecting the Contact Control option or from under the Control Panel menu → Limits → Contact Control (A/B Polarity). 

Blue Create Button

Limits → Contact Control (A/B Polarity)

On the popup window, click in the Find Student fields for Student A and Student B and scroll through the list of student names to select the pair of students.  If an Admin note is added (optional), it will only be visible to other admins on the Contact Control page.  (Consider describing in this field why the Contact Control was set up for this set of students.)  Then click Create.

Admins can also customize the message that students will see if they are set up for Contact Control and the limit is triggered.  To edit the default message, click on the white Message button in the upper right corner.  On the popup screen, write the desired message.  When finished, click Save.

Once the pair of students has been added, an Admin can see how many times this restriction is triggered by looking at the Summary report on the screen (shown below).  An Admin can also click on the Detailed report, which provides additional information, such as which student was on an active pass, what their destination was, and which student was prevented.  It also includes the attempted from (web vs. app), date, and time details.

The Admin can also inactivate the limitation by clicking on the green Active button.  To make that limitation active again, simply click on the red Inactive button.  To delete the limitation completely, click on the three(3) dots to the right of that entry and click on Delete.

  

REMEMBER:  

If more than two (2) students are not allowed in the hallway at the same time, multiple “pairings” for these students will need to be entered.  (For example: Student 1 and Student 2, Student 1 and Student 3, Student 2 and Student 3, etc.)

Additional items that Admins may want to consider before activating Contact Control:

Student Screen with Contact Control:

Below is what the second student will see in Pass when their “partner” is out on an active pass.  

This message appears when the student clicks the “Submit” button.

Teacher Pass Message:

The red message below appears for Admins, Teachers, and Staff members when creating a Teacher Pass for a student whose partner already has an active pass.  The system will allow the Teacher or Staff member to create the pass, if desired.  

In the reverse scenario, if student A is on a Teacher Pass and their partner (student B) attempts to create a pass, student B will not be able to create the pass and will receive the designated student message.  

Contact Control and Appointment Pass:

If one student is out on an active Appointment (APT) Pass or is awaiting approval for an APT pass, the partner will not be able to create a pass.  If a student is out on a student-initiated pass, a Teacher, Admin, or Staff member will be able to create an immediate APT pass for the partner.

VIDEO ALERT:  

Please watch the “Contract Control (A/B Polarity” video found on the Pass Training Video Index (Admins).

Return to Limits

Return to Table of Contents

Pass Blocking

Pass Blocking provides an admin with the ability to block passes for all users for a specified period of time, including daily and weekly blocks.  This can be done for specific types of passes (Student-initiated Pass, Teacher Pass, Kiosk Pass, and/or Appointment Pass) or all passes.  When a Pass Blocking Period is created, users will not be able to initiate a new pass.  The admin can create a message for students already out on a pass with specific instructions on what to do during the pass blocking period.  (For example: Please go to the nearest classroom immediately.)

To create pass blocks for your school, under the Control Panel, click on Limits → Pass Blocking or click on the blue Create button in the upper right corner and click on the light blue Pass Blocking tile.

To create a pass block, click on the blue + Block button in the top right corner of the screen.  Choose the following when creating the block:

When finished, click the blue Create button.

 

An active pass block can be edited or deleted.  An expired pass block can be deleted.  To take action on a particular block, click on the three (3) dots to the right of that particular block and choose Edit or Delete.  If editing a pass block, click Edit, make the appropriate changes to that particular block, and then click Update. If deleting a pass block, click Delete and then the red Confirm button.

QUICK TIP:

  • Need to "Pause" a Pass Block?  Follow these steps:
  • Click the three (3) dots to the right of the block
  • Click Edit
  • Deselect the Pass Types that are currently blocked
  • Click Update
  • To reinstate the Pass Block, follow these steps:
  • Click the three (3) dots to the right of the block
  • Click Edit
  • Select the Pass Types to be blocked
  • Click Update

Active Pass Block

Expired Pass Block

Dashboard Screen:

During the pass block, all adults will see the details of the pass block on their Dashboard.

Teacher Screen:

If a pass block has been set to include Teacher Passes or Appointment Passes, the teacher will see the message below when creating a Teacher Pass or Appointment Pass.

Student Screens:

Students will see the following message when trying to create a new pass during a pass block period of time.

If a student is out on a pass when the pass block is set and has a device with him/her, he/she will receive the following message on his/her Pass screen.  The messages to the students (or instructions) are customized by the Admin who set up the pass block period.

Return to Limits

Return to Table of Contents

Implementing a “10/10” Rule

Some admins desire to set a “10/10” Rule (or a “5/5” Rule) so as to block passes during the first 10 minutes and last 10 minutes of a period/block.   To create this type of block, use your bell schedule to create the blocks (two per period - one at the beginning and one at the end).  See the following illustration and then adjust your pass blocks according to your schedule.  

Five-period Day with a Flex Period

Period

Start Time

End Time

Blocks Created

Repeat

1

7:45AM

9:00AM

7:45AM - 7:55AM

8:50AM - 9:00AM

Daily

2

9:05AM

10:20AM

9:05AM - 9:15AM

10:10AM - 10:20AM

Daily

3

10:25AM

11:40AM

10:25AM - 10:35AM

11:30AM - 11:40AM

Daily

4

11:45AM

1:00PM

11:45AM - 11:55AM

12:50PM - 1:00PM

Daily

5

1:05PM

2:20PM

1:05PM - 1:15PM

2:10PM - 2:20PM

Daily

Flex

2:25PM

3:15PM

2:25PM - 2:35PM

3:05PM - 3:15PM

Daily

NOTE:  In the event that you want to have some flexibility with your “10/10” pass blocks, select the Weekly repeat option and then choose the days of the week that you desire the blocks to be in force.

VIDEO ALERT:  

Please watch the “Setting Up Pass Blocking” video found on the Pass Training Video Index (Admins).

Return to Limits

Return to Table of Contents

Users

Main Users

          User Table

Substitute Users

          Substitutes Interacting with Student Passes

          Directions for Substitutes

Archived Users

__________________________________________

Rostering and Managing Users

Understanding Roles

Rostering Users

          Securly Sync

          Third-Party Providers (ClassLink, Clever, etc.)

                    Additional Third-party Provider Notes

          User CSV File

                    Creating a CSV User File

                              Best Practices 

                    Uploading a CSV User File

          Manual (Individual) Users

                    Password Guidelines

                    Steps for Adding a Manual (Individual) User

Maintaining Users (Editing or Archiving)

          Editing a User

          Archiving (Removing) Users

                    Auto-archiving Users

                    Manually Archive Users

Users

The options under the Users tab (Main Users, Substitute Users, and Archived Users) allow admins to manage the users in their Pass system.

Main Users

On this page, you can see who has access to your Pass system.

The four blue tiles across the top provide snapshots of the different role users (STUDENTS - 1, TEACHERS - 2, STAFF - 3, and ADMIN - 4) in your school.  For each user, you can see the total number of users, the number of users added via file upload, the number of users who have been invited via email, and the number of users who have logged in.

Admin users have several options regarding users on this page.  Click on the link below for more information about each of these options.

User Table

The User Table allows admins to see and interact with the list of individual users in their Pass system.  From the Table, admins can do the following:

Return to User Management

Return to Table of Contents

Substitute Users

The primary substitute workflow in Pass is for an Admin to create a substitute account and provide the substitute with a unique PIN to enter on a student’s device in order to approve a pass.  The substitute does not have full access to Pass or the dashboard; they will NOT log in to the system.  

In order to add a Substitute, go to the Control Panel menu, click on Users > Substitute Users.  Click the blue “+ New Substitute” button in the upper right corner.  Enter the corresponding information. Click Create when finished.

REMEMBER:

Substitute accounts can be specific to a person or could be generic and reused with different subs that work in your building.

You can choose to enter a PIN or have the system generate a PIN for the sub account.  Setting your own PIN may be more favorable and allow you to keep the PIN simple for the sub to remember.

Return to User Management

Return to Table of Contents

Substitutes Interacting with Student Passes

Substitutes can interact with student passes in two ways: on the student’s device or on a kiosk.  Either way, they will enter their PIN.

Approving a Student’s Pass - Student’s Device

To APPROVE a student’s pass - Student’s Device

Click on the teacher’s name

on the student’s device.

Enter your PIN and click APPROVE.  The student may now leave the classroom.

QUICK TIP:

Pick up the student’s device, enter your PIN, and hand the device back to the student.  (This process will help to keep your PIN secure.)

To END a student’s pass - Student’s Device

When the student returns to the classroom, click on the Location.

Enter your PIN and

click END/KEEP.

Return to User Management

Return to Table of Contents

Approving a Pass - Kiosk

If approving a student’s pass from a Kiosk, the sub will enter his PIN and click Approve after the student has entered the appropriate information.

Directions for Substitutes

Here is a document template of Directions for Substitutes.  (This document will open in a new browser tab.  Copy and paste this information into a document for your school.  If you prefer to request a different document format from us, please contact the Pass Help Desk.)

REMEMBER:

If a substitute has a school email address and/or you want the substitute to have full teacher access to Pass, add them through one of the other methods mentioned above in the Rostering Users section.

Return to User Management

Return to Table of Contents

Printing Student Digital ID Cards

The setup for student digital ID cards is automated and requires no additional actions from you.

You can print your students’ digital ID cards from your Pass system.

Under the Control Panel, click Users and then Main Users.  On the next screen, click Print Student Digital IDs.  

 

A popup will appear alerting you that your Digital Student ID cards are being prepared.  Click Okay.  When the file is ready for download, you can find it on your Dashboard.

Go to your Dashboard.  When the file is ready to be downloaded, you will see the following message toward the top of your screen.  Click Download.  (The download will be available for 90 minutes.  If you don’t click Download in the 90-minute window, you will need to repeat the aforementioned steps.)

Once downloaded, you can print your students’ digital ID cards.

REMEMBER:  

You can NOT print a single student ID, and you can NOT manipulate the layout to fit a sheet of badges.)

Return to User Management

Return to Table of Contents

Importing Student Photos

You can easily upload your students’ photos into your Pass system by following the guidelines and steps outlined below.

To upload your student’s photos, click on “Users” and then “Main Users”.  On the “Main Users” screen, click on “import Student Photos” and follow the instructions on the next screen.

On the white popup screen, read through the directions and make sure that your students’ photos meet the requirements.  When ready, browse for your photos’ file and then “Submit” your students’ photos.

After uploading your students’ photos into your Pass system, there is nothing more for you to do. Please allow 48 hours for your photos to appear in your Pass system.  If you do not see your photos after that time frame, please create a Help Desk ticket so we can assist you.

After your initial student photo upload, you can upload additional students’ photos using the same process.

Once student photos are uploaded into Pass, they can be accessed/viewed in the following locations: Dashboard (active or ended passes), History, Appointment Pass, or Users (Main Users)

Control Panel → Main Users screen (Pass Admins can view photos for any user that has an uploaded photo by clicking on the blue hyperlink shown below.)

 Admin/Teacher/Staff Dashboard:

Student Pass screen:

Student without a photo uploaded (silhouette will appear):

Return to User Management

Return to Table of Contents

Rostering and Managing Users

Understanding Roles in the Pass System

As you prepare to add users to your Pass system, please be aware of the four user roles and the access level of each user.

Admin

Access to the Main Navigation Menu, Control Panel, and Management of system settings

Teacher

Access to the Main Navigation Menu (NOT the Control Panel)

There is no difference in functionality between these two roles.

  • Teachers - manage student hall passes and monitor student movement 
  • Staff - need access to the Pass system but aren't classroom teachers

Staff (non-teacher personnel - nurse, librarian, media center specialist, SRO, guidance counselor, etc.)

Access to the Main Navigation Menu (NOT the Control Panel)

Student

Access to the Student Menu

Return to User Management

Return to Table of Contents

Rostering Users

Rostering Users is the process of adding users into the Pass system as active users.  There are multiple ways this can happen:

Please see below for more details about each of these.

Once users are rostered into Pass, they will need to log into the system using one of the available "authentication" methods. Single sign-on options include Google, Microsoft, ClassLink, or Clever. Manual authentication is also an option, but the user must have a valid email address.

Securly Sync

The primary user rostering option available to clients is through our solution called “Securly Sync”. This solution can connect to various student information systems- such as a OneRoster API, PowerSchool Plug-in - or we can obtain the information with CSV files via SFTP. Please read this document for more details about Securly Sync.  Once users are rostered via Securly Sync, additional data-sharing options or syncs will be available.

Return to User Management

Return to Table of Contents

Third-party Providers

While the preferred method of rostering users is via Securly Sync, clients who are using ClassLink or Clever will be able to use these methods for the foreseeable future. 

The resources below are provided for reference for clients who need to connect via one of these methods.

Third Party

Additional Third-party Provider Notes

Once the connection with one of the third-party providers has been set up and the sync has taken place, please review the list of users that have been imported to confirm that all users have been added to the system.  This can be done on the Pass “Main Users” screen.  Please see the items below for more details:

REMEMBER:  

  • The only student data that is collected from ClassLink or Clever includes the following:  first name, last name, email address, role, grad year (student), and ID number (student).
  • Admin do have the ability to update roles within the Pass system, and they are sticky.  Once changed, the changes will remain in the system.  

Return to User Management

Return to Table of Contents

Users via CSV File Upload

If your school does not use ClassLink or Clever but utilizes Google or Microsoft, your users will be able to log into Pass (or authenticate) using Google/Microsoft credentials.  In order to add your users to the Pass system, you will need to create a User CSV File.  The details for the file format are listed in the section below.  Uploading the file can be done from the Main Users screen through the “Import Users” button (also shown below) or by sending the file via SFTP (Secure File Transfer Protocol).

If sending the User CSV file(s) via SFTP, credentials will be provided to you by your Client Project Manager.  Many clients coordinate with their IT Departments to automate the process to pull the user file from their SIS (Student Information System) and automatically send this to the Pass server each night or on a regular basis.   Please discuss the details with your implementing Client Project Manager; or if you’ve already implemented Pass and wish to add this feature, contact the Pass Help Desk for assistance.   

Return to User Management

Return to Table of Contents

Creating a User CSV File 

The Pass system provides school Admins with access to upload a CSV file of user information in order to create accounts for users who are not shared from Securly Sync or a third party (ClassLink, Clever, etc.). Below is the required file format when uploading users into Pass.

firstname

lastname

email

role

gradyear

status

idnumber

Sam

Lee

sam@schooldomain.org

admin

1

Nicole

Ward

nicole@schooldomain.org

teacher

1

Betty

Smith

betty@schooldomain.org

staff

1

Amy

Dodd

amy@schooldomain.org

student

2025

1

234567

It is very important that the column headers in the file match exactly what is shown above (bolded and highlighted for emphasis).  The system uses the column headers to match data to the correct fields in Pass.  If they are not exact, the system will not be able to process the file.  (Capital vs. lowercase letters do not matter throughout the file.)  Below are additional details for each piece of data included in the file:

firstname

Required fields - provide first and last name or desired display name  

  • Hyphens and apostrophes are accepted

lastname

email

Required field

  • User(s) will not be added if the email field is blank
  • Confirm email domain(s) match what was given for system setup (@schooldomain.org)

role

Required field

  • The only four options are: admin, teacher, staff, or student
  • The role determines the privileges you want them to have in Pass
  • If the field is left blank, the “student” role will be given to the user

gradyear

Optional but preferred field

  • Grad year should be in a 4-digit year format (2027 - not 27)
  • If not provided, then leave this column blank on the file - do not use “null” or “0” (zero) in this column
  • Graduation year is used to enable certain functionality within the system, which will not be available if this data is not provided

status

Required field

  • Enter “Active” or “1” in the Status field to add users to your system or keep existing users active
  • Do not enter any of the following values in this field:  “Inactive”, “0”, or “Archive”  
  • Entering one of these values can cause the user to be put into an “Inactive” status, which should not be used in Pass.  
  • If a user no longer needs access to Pass, remove them from the file.
  • Click here for information about removing users who no longer need access.

idnumber

Optional field

  • Needed for students if you plan to send student photos for use within the system and for setting Kiosk passwords
  • Leave fields blank if not sending this data

User File Management Best Practices

  1. Please create and manage a primary user file(s) for ongoing user management purposes.  Each file upload should contain ALL users that you wish to be active in the system and not just new users.  Here are the recommended file options:

             - or -

QUICK TIP:  

We recommend that you use the same file name each time you upload your file, which will overwrite the previous file.

  1. To add new users, add them to the existing file that has all the other users and upload the file again.

QUICK TIP:  

If you don’t have your primary file, it is possible to click the “Download CSV” button on the Pass Main Users screen to create a new master file.  From here, you can add/remove users as needed, remove the unnecessary columns, and then upload the file into the system.

  1. To remove users who no longer need access to Pass, drop them off the existing file and upload the file again.  They will be automatically archived (removed) from the system.

  1. Editing User Data:  Currently, all user data can be edited by uploading a new file.
  1. If the “idnumber” field is filled in, a change can be made to the email address and the user record and data is retained.  
  2. If the “idnumber” field is blank and the email is changed, a new user will be created.  (For students, the ‘old’ user record will be archived.  In this situation, the historical data will be attached to the original user record/email.)

  1. If you are using Securly Sync, ClassLink, or Clever, ONLY upload users via a file who are NOT included in the sync. Please allow 30 minutes for your file to show in the “File Uploads” screen and overnight for new users to be added to the system.

VIDEO ALERT:  

Please watch the “How to Create User CSV Files” video found on the Pass Training Video Index (Admins).

Return to User Management

Return to Table of Contents

Uploading a User CSV File

Below are the steps for uploading a user CSV file directly into the Pass system.  When a file is uploaded through the Pass interface, it is stored in a client-specific directory on the server.  Admins can view uploaded files from the Control Panel menu option → File Uploads.  (Please see additional details below.)

  1. From the Users → Main Users screen, click Import Users.  The screen below will appear.
  1. The screen contains helpful instructions and a link to a sample CSV file.
  2. The user CSV file will need to be created before you can proceed with the steps below.  

  1. Once the file has been created, click on Browse, select your user file, and click Submit.

  1. The following window and message will appear.  By clicking the HERE, the “File Uploads” menu screen will appear. (Clicking “X” will just close this window and take you back to the Main Users screen.)

  1. Below is the “File Uploads” screen where Admins can view their uploaded files.
  1. Files will not be processed instantaneously but put in a queue for processing.  This process can take anywhere from 24-48 hours for the data in “Processed” files to be fully integrated into Pass, depending on the volume of files in the queue.  
  2. The file “Status” will show one of the following:  
  1. Queued - File is in line to be processed.
  2. Pending - File is waiting to be processed.
  3. In Process- File is currently being processed.
  4. Processed - File has been processed successfully.  Check the Main Users screen for new users.  (This does not necessarily mean that ALL data was added to the system.  If there was an error in the data or a blank field, the record may have been skipped.)
  5. Failed - File processing was not successful.  Check the following:

(After making the necessary adjustments to the file, re-upload the adjusted file or contact the Pass Help Desk for assistance.)  

  1. The green “Processed” status will appear once the file has been successfully uploaded.

  1. Newly added users will be noted on the Main Users page (see the blue boxes below) as well as on the user list.  (Note:  Screenshot of the user list does not show all new users in this example.  Newly added users will have an “Added” button to the left of their name.)

Return to User Management

Return to Table of Contents

Manual (Individual) Users

Users can be added to the system individually from the “Users” screen in Pass. When adding users individually, the user will be able to log into Pass by using an assigned “manual” password OR through Google or Microsoft single sign-on (SSO).  

IMPORTANT NOTE:  

As security is important to us, we require users to utilize a valid email address when logging into Pass.  You can read more here. Users are required to validate their email address when logging into the system “manually” using a password assigned in Pass. (This does not apply to those using a single sign-on method such as Google, Microsoft, ClassLink, or Clever.)

Return to User Management

Return to Table of Contents

Password Guidelines

The following guidelines apply when designating a Pass password for a manually-authenticated user.

  • Passwords must have a minimum of 8 characters and a maximum of 64.
  • Passwords should contain a mix of upper and lower case letters, numbers, and at least one special character.
  • Please avoid common words as a part of your password.

Return to User Management

Return to Table of Contents

Steps to Add an Individual User

In order to add a user individually, under the Control Panel, click Users → Main Users.  On the Main Users page, click Add User (full access)

.

Click “Yes” at the message shown below - if you wish to proceed.  Please see the additional notes below:

VIDEO ALERT:  

Please watch the “How to Reset Passwords for Manual Users” video found on the Pass Training Video Index (Admins).

On the “Add User” screen, the following information should be selected or entered:  

Click Submit when finished.

Adults

Students

Below is the Pass login page showing where “manually authenticated” users enter their credentials to log into the system.

Return to User Management

Return to Table of Contents

Maintaining Users (Editing or Archiving)

Editing a User

Pass will allow Admins to edit a user’s record directly in the system; but if the user is rostered from a sync with a third-party source or via User CSV File upload, then the data will revert back upon the next sync/upload if the data is not changed at the source. (There is one exception to this, which is the “Role” field. If this is updated for an adult directly in the system, it will not revert back.)

REMEMBER:

The source of data for most schools, who roster users into Pass from a third-party source, is the school’s Student Information System or “SIS”. In these cases, it’s probably necessary to contact your IT professional who manages the SIS in order to edit a user’s information in the SIS. Once the edit is made, this will be updated in the third-party system and subsequently in Pass, as the system syncs.  

For schools that roster users via user CSV file, it is possible to make an edit to most of the user data fields directly on the file and reload this into the system.  Please see the Create & Manage CSV User Files document about editing via the user file.

For users who have been added manually, you can easily edit the user's information from within Pass.  Below is the Pass “Users” screen where edits can be made. From this screen, click the three (3) dots under the “Actions” column for the desired user and click EDIT. On the “Update User” screen, make the necessary changes and click Update.

Return to User Management

Return to Table of Contents

Archiving (Removing) Users

“Archiving” users refers to removing them from the system so they no longer have access and do not appear throughout the system on future dates. Historical data is retained with the user record and displayed in the system for dates the user was active. In addition, if the user record is returned (or “unarchived”), the historical data will be reinstated in the system.

REMEMBER:  

Users who have been archived will appear on the Archived Users page for 90 days.

 

There are two ways that users can be archived in Pass:  auto-archiving and manual archiving. Each is described below in more detail. It is also important to understand more about the “Prevent From Archiving” (PFA) option on a user’s record in Pass. Please see the details below.  

Prevent From Archiving (PFA)

This button, which is located on the “Add/Update User” window (shown below), is an “override” button that can be used to prevent users from being “auto-archived” when your school is using multiple rostering methods to add users to Pass.

Toggle “on” → If you do not want the user to be archived when they are not included in a third-party sync or a user file upload. (i.e. - If you don't want Admins/Staff, who are not being shared, to be archived when the third-party sync happens.)

Toggle “off” → If the user will be included in future third-party syncs or a user file upload. This will allow them to be auto-archived through that source in the future. (i.e. - Adding a student to Pass before they’ve been added to the third-party source.)

IMPORTANT NOTES:

When a user is originally added to Pass via third-party sync or file upload, the PFA toggle defaults to “off”, so that the user can be auto-archived when they are removed from the sync/file.

When a user is originally added to Pass manually by an Admin via the system interface, the PFA toggle defaults to “on” so that the user is NOT auto-archived when a third-party sync or file upload takes place.

Return to User Management

Return to Table of Contents

Auto-Archiving Users

When a user no longer needs access to the system, the process to remove or “archive” them will largely depend on how they were “originally” added and whether or not the “Prevent From Archiving” (PFA) toggle is on/off. The ideal process is for the system to “auto-archive” most, if not all, users who no longer need access, therefore streamlining the user management process for administrators.  

  

The system can “auto-archive” both students and adults who have been rostered (added) to Pass from a third-party source or via a user CSV file. When a user is removed from the third-party source OR the user CSV file and the next sync/upload takes place, the system will automatically archive the user(s). (NOTE:  If the PFA toggle has been turned on for a user, they will not be auto-archived when removed from the sync/file.)

Return to User Management

Return to Table of Contents

Manually Archiving Users

Pass Admins have the ability to manually archive all users in the system, regardless of whether the “Prevent from Archiving” toggle is on. This includes users who were rostered via user CSV file, third-party sync, or who have been manually added directly to the system.  

IMPORTANT NOTE: 

  • If an Admin manually archives a user that was originally added via user CSV file or third-party sync and that user is not removed from the file or third-party sync, they will be returned as an active user (“unarchived”) in Pass upon the next file upload or sync.

To manually archive a user, complete the following steps in Pass:

  1. Navigate to Users → Main Users.
  2. To archive an individual user, search for the user, click on the checkbox to the left of the user’s name, and click ARCHIVE.

OR

To archive multiple users at the same time, locate the users, click the checkboxes to the left of the user's names, and then click ARCHIVE.

  1. Archived users can be found by clicking on Users → Archived Users.

 

To view archived users, follow these steps:

To restore an archived user to active status, follow these steps:

OR

To view and manage archived users, go to the Control Panel menu > Users > Archived Users.  From this screen (shown below), you can search for archived users that have not yet been completely removed from the system and “unarchive” users, if needed.  

REMEMBER:

Users who have been archived in the last 90 days will appear on this page.

Return to User Management

Return to Table of Contents

System Settings

Auto Pass

Pass Times

Periods

Locations (rooms)

Manage “Favorite Locations and People”

Manage Order

Pass Transparency

Auto Pass

Auto Pass is an optional feature that allows schools to make certain types of passes available for students to start and stop, start only or stop only without requiring a teacher’s digital approval.

REMEMBER:  

Auto Pass availability is associated with the adult’s account.  Auto Pass functionality will only work when the “from” field is a person.  It will not work from a location.

This setup is a 2-step process.

Step 1

Step 2 

Step 1 - You will choose the locations in the building that can be utilized as Auto Pass locations.  

From the Control Panel menu, click on System Settings → Auto Pass.

To add Auto Pass locations:

Once your locations have been selected, they will appear on the Auto Pass page.

To remove a location from the Auto Pass location list:

Step 2 - Teachers can choose which locations to use as Auto Pass locations for their classroom from their own Dashboard.

Once this feature is activated by an admin, the “Auto Passes” tile will appear on the dashboard.  Click on the edit pencil to select the Auto Pass locations and any limits that you would like to apply.

When choosing those locations, adult users can choose to have the students do the following:

Users can also limit the number of students who are out of their classroom on an Auto Pass at any given time.

REMEMBER:  

Limits can be adjusted throughout the day to meet the needs of certain classes.  Users can “Turn off” the Auto Pass functionality for one class and then reset the limit for another class, both with just a few clicks.  Remember to click Submit any time you make a change to this screen.

Following the pass protocols that have been set up in each user’s location, students can create passes to those Auto Pass locations the same way that they create their own passes.  Once permission has been given to leave the classroom, the student can then START his own pass from his own device by clicking on the Play button.

When the student returns to the classroom, the student can end the pass by clicking on the STOP button on their device, or the teacher can end the pass from his Dashboard by clicking END/KEEP.

VIDEO ALERT:  

Please watch the “Enabling Auto Pass” video found on the Pass Training Video Index (Admins).

Return to System Settings

Return to Table of Contents

Pass Times

Setting pass times in your Pass system allows you to control the amount of time passes stay on the Dashboard.  Default times are set in the system, and you can easily adjust these times to fit the needs of your building.

Before making adjustments to your times, below is a description of each one.

To adjust your Pass Times, from the Control Panel menu, click on System Settings > Pass Times.

Click in the box(es) of the time(s) you would like to adjust, make the appropriate change(s), and

Click Save settings before leaving the screen.

REMEMBER:  

The system will end all passes at midnight if there are any passes still running at that time.

VIDEO ALERT:  

Please watch the “Pass Time Settings” video found on the Pass Training Video Index (Admins).

Return to System Settings

Return to Table of Contents

Periods

Periods in Pass are a visual association for appointment times. They are only used for information purposes for Appointment Passes. We are not importing student schedules or tying defined Periods to a bell schedule at this time.

From the Control Panel menu, click on System Settings > Periods.

To add periods/blocks, click the blue + Create button in the top right corner of the screen and enter the name of your period/block.  Click Submit.   Repeat this process until you have added all of your periods or blocks.

To change the order of any created period/block, use the directional button to the left of the period/block and drag it to the desired location.  To edit or delete an existing period or block, click on the three (3) dots under the Action column and select the desired action.  When deleting a period/block, a popup screen will appear.  Click Confirm if you are sure you want to continue with this action.

VIDEO ALERT:  

Please watch the “Adding/Editing Periods” video found on the Pass Training Video Index (Admins).

Return to System Settings

Return to Table of Contents

Locations (rooms)

From the Control Panel menu, click on System Settings → Locations (rooms).

To add a location to your system, click the blue + Location button in the top right corner of the screen.

Enter/Select the following information on the popup screen and then click Submit:

Location name

Name the location or room.

Icon

Select an icon that represents that location.  (Click on the dots below the icons to see more options.)

Trip type 

Layover - The student leaves point A and goes to point B and then returns to point A and is checked out/in at each location by different people.

One Way - The student leaves point A and goes to point B and is checked out/in at each location by different people and does not return to the original destination.

Roundtrip -  The student is going to an unattended location and returning to the original destination.

Comment type

Mandatory - Students are required to make a comment on the pass.

Optional - Students are not required to make a comment.

Hidden - Students do not need to make a comment on the pass.

Extended Pass (Optional)

(Check the box and select the time frame for this location.)

The red dots to the right of the information indicated a required field.  Remember to click Submit when finished adding each location.

REMEMBER:

Individual teacher classrooms should NOT be added here.  Students will use the teacher’s names to create passes to/from teacher classrooms.  (If you do add teacher’s rooms here, it may cause confusion for the students when making a pass, because that “teacher’s name/room” will show up twice.)

Admin, Staff, and Teachers can “associate” themselves to the rooms/locations in which they work so that they can monitor passes to/from those locations.  (For example, an admin may associate with the Main Office or Guidance Office.)

There is an option to “Import Rooms” from a CSV file.  

  • Click on the CSV button and follow the instructions on the Pass screen.  There is a sample file available that shows the column headers and data required.   (If you upload a Locations file, you can easily track the status on the Locations (rooms) page.  In the upper left corner, simply click Files.  The name of the file, status, and date created will be displayed on the screen.)

IMPORTANT NOTE:  

  • If you upload a "locations" file that contains a location/room that already exists in your Pass system, the upload will fail.  

VIDEO ALERT:  

Please watch the “Adding/Editing Locations (rooms)” video found on the Pass Training Video Index (Admins).

Return to System Settings

Return to Table of Contents

Manage “Favorite Locations and People”

An Admin can also manage favorite rooms and people from Locations (rooms) screen.  These favorites will appear on the adult’s screen (Teacher Pass) and on the student’s screen when creating a pass.  You can select up to 10 locations as favorites for your school. Teachers and students can further customize their favorites, as well.

To select a location as a favorite:

Selected favorite locations will have a blue star to the left of the location.

To edit a location (change the name, icon, comment, pass type, or status):

To change just the icon of a location, click on the icon to the left of the location OR click Edit to the far right of the location, make the appropriate change to the icon for that location, and then click Update.

Return to System Settings

Return to Table of Contents

Manage Order

To change the order in which your favorites appear on the adults’ and students’ screens, click Manage favorites, click on the directional arrow to the left of the location and place it in the correct order.  To remove a favorite location, click the Trash Can to the right of the location.  Remember to click Save before leaving this screen.

When finished, students and adults will see these Locations (rooms) and icons in the same order whenever they create a pass.

Student-created Pass

Teacher Pass

Kiosk

Return to System Settings

Return to Table of Contents

Pass Transparency

By default Pass allows Teachers and Staff to see all active and ended passes, including Appointment Passes and History for the entire school building.  If a school would like to limit its Teachers/Staff to view only ended passes they are associated with, then "Pass Transparency" can be turned off.  (Teachers/Staff can still see all active passes but only while they are active on the dashboard.  They will not be able to see ended passes anywhere in the system unless they were associated with the pass.)  

The Pass Transparency setting screen (shown below) can be accessed from the Control Panel by clicking System Settings → Pass Transparency.

When Pass Transparency is turned off, admins can then specify certain teachers/staff to be allowed to keep pass transparency.  

REMEMBER:  

Admins will always have Pass Transparency turned on.

To turn Pass Transparency off:

Once your adults who need Pass Transparency have been added, they will appear on the Pass Transparency page.

To remove an adult from the Pass Transparency list, click on the three(3) dots under the Action column on the right side of the screen for that adult and click Delete.  On the popup window, click Confirm, which will then remove the location from your list.

VIDEO ALERT: 

Please watch the “Pass Transparency” video found on the Pass Training Video Index (Admins).

Return to System Settings

Return to Table of Contents

Modules

Appointment Pass Module

        Email Notifications

        Options

        Student Appointment Requests

Tardy Management Module

        Capturing Tardy Infractions

                CSV Uploads

                Teacher Pass

                Kiosk

                Student Late Pass (SLP)

Visitor Management Module

        Front Desk Users - Visitor Adults

Queue Management Module 

Auto Check-in Module

Kiosk Module

Digital ID Card

        Printing ID Cards

Retain Extra Passes

Appointment Pass Module

Appointments allow adult users to schedule time with students. These can be used for immediate meetings or for scheduling meetings ahead of time.

If your school is interested in using the Appointment Pass feature, you will need to make sure this module is enabled.  To activate this feature and make the “Appointments” menu option available to your users, to the right of Appointment Pass, slide the toggle to the right.

Email Notifications

Please be aware of the following:

Check the box if you want students to receive 20-minute and 5-minute appointment email reminders (in addition to the in-application reminders).

Morning Agenda emails will be sent to all USERS ("From" adult, "To" adult, and the student) involved with the appointments scheduled that day.   (They will NOT be sent for an appointment to a Location, even if users are associated with that location.)  In order to receive this email, the appointment must be made the previous day. If you would like to prevent the Morning Agenda email from being sent to adults and/or students, check the appropriate box(es).

Options

By default, admins have the ability to edit other user’s Appointment Passes. Check the corresponding box if you DO NOT want admins to be able to edit another user’s Appointment Passes.

VIDEO ALERT:  

Please watch the “Turning on Appointment Pass & Notifications” video found on the Pass Training Video Index (Admins).  Additional training videos related to Appointment Pass can be accessed in the Teacher/Staff training material.

Return to Modules

Return to Table of Contents

Student Appointment Pass Requests

The section shown below (from the Modules screen) is what controls whether or not your school has enabled the functionality for students to make appointment requests to adults and/or specific locations.  When at least one of the options below is checked, this will enable the “Appointment Pass” create option on the student’s Pass screen (also shown below).

Once enabled by an Admin, the adults can specify whether they will allow student appointment requests to be made to them by selecting "Yes” or “No" in their Profile Settings.  For Rooms/Locations to receive appointment requests from a student, an Admin must go to the Locations (rooms) page and toggle the specific room/location to “Yes” in order for the student to send a request.  If “No” is selected for a location on the Locations (rooms) page, that location will not appear as an option for the student when creating the request.

Profile Settings

Locations (rooms)

All student appointment requests must be “Confirmed” by the adult receiving the request in order for them to take place.  Please see the Student Appointment Pass “Requests” (sAPT) section at the end of this manual for additional details.  

Return to Modules

Return to Table of Contents

Tardy Management Module

Capturing Tardy Infractions

Schools have several options for inputting Late to School (LTS) and Late to Class (LTC) instances into the Pass system.

Option #1 - CSV Upload

Option #2 - Teacher Pass (TCH)

Option #3 - Kiosk

Option #4 - Student Late Pass (SLP)

In the Control Panel, click on Modules.  Make sure Tardy Management is toggled to the “On” position.  You will have several options to input Late to School (LTS) and/or Late to Class (LTC) infractions into Pass. You can choose one or a combination of the following options.

Option #1 - CSV Upload - For LTC or LTS infractions, schools can upload that information via a CSV file directly into Pass.  (Sample LTC/LTS files can be found in the system.)

Return to Modules

Return to Table of Contents

Option #2 - Teacher Pass - The school can allow the Teacher Pass (TCH) to have two checkboxes that allow an Admin to designate the TCH pass as a LTS or LTC pass.

The school can further decide to (1) allow All Adults to see the LTS or LTC buttons on a TCH pass and to access Tardy Reports and Tardy Detentions & Appointment List.

OR (2) allow only specific teachers/staff (in addition to Admins) to see the LTS or LTC buttons on a TCH pass and to access Tardy Reports and Tardy Detention & Appointment List.

If the second option is chosen, click the Add Adults button, click + Assign button in the top right corner, type or select the names of those adults from the dropdown menu, and then click Allow. You can also click Tardy Settings, click Tardy Adults, click the + Assign button, type or select the names of those adults, and then click Allow.

Return to Modules

Return to Table of Contents

Option #3 - Kiosk - Admins can allow students to mark passes created on a Kiosk as LTC and/or LTS.  Check the LTC and/or the LTS boxes as shown on the screenshot below.

For a student to create an LTC/LTS pass on a Kiosk, the student will click on New Pass, select the Destination (Teacher’s name) from the dropdown menu or favorites, add the reason for the tardy, click the appropriate LTS/LTC option, and then click Submit.  

On the next screen, the student will add the corresponding User Authentication information (enter email and passcode, swipe their card, or scan their Barcode/QR code).

Additional Info:

While students can also enter their passcode in the "Swipe your card" field or "Type in barcode/QR code" field, it is not the intended functionality for these authentication methods.

 

The adult will then enter their PIN and click Approve OR Approve the pass from their Dashboard.  A LTS badge or LTC badge will appear to the left of the student’s name, indicating that this is a tardy pass.

Late to School Badge

Late to Class Badge

When the student arrives to class, that adult will END/KEEP the student’s pass, and that student’s tardy infraction will be recorded in the Pass system.


REMEMBER:

Any adult who interacts with that pass can edit it to remove the LTC/LTS or switch it if they are allowed access in Modules as well.

Any adult who has access to Tardy Management will have the ability to filter passes on both the Dashboard and History tabs.

Dashboard Filtering Options

History Filtering Options

Return to Modules

Return to Table of Contents

Option #4 - Student Late Pass (SLP) - Admins can allow students to mark passes as LTC or LTS from the student’s device.  Under the Tardy Management Module on the Modules page, check the LTC and/or the LTS boxes as shown on the screenshot below.

From the student’s Dashboard, the student will click Create Pass (1). On the Create Pass screen, the student will click Late (2), choose the teacher/location (3) (typically the adult for which the student is late), add a Reason (4), click Late to School or Late to Class (5), and then click Submit (6).  The student’s Late pass will automatically be approved and simultaneously ended by the system (7).

For adults, the Student Late Pass (SLP) will appear on both the Dashboard under the Both and Ended pass tabs and on the History page.  

SLP Items to Note:

  • The student will select only the destination (adult or locations), but the SLP will present the same adult/location name for the starting and ending point “from/to”.

  • The SLP will not count toward any limits or pass blocks.
  • Adults will NOT need to approve the SLP.  It will automatically be started and stopped.
  • Students will not be able to create an SLP to an adult who is Out of Office (OOO).
  • The SLP will be visible in Today’s history (admin and student), Pass History, and Dashboard, but not in the Summary report or Meet-up report.
  • Only the adults associated with the pass and admin will be able to edit the LTC or LTS designation within the same day. In that case, the pass will remain an SLP.
  • Detentions that are earned as a result of tardies will be assigned overnight.

  • If the LTC/LTS designation is removed, added, or edited, the SLP will remain as an ended pass on the Dashboard and in History.  The adult who removes the badge will have an automatic comment generated that says “LTS/LTC removed/added/edited by (user’s name) at 0:00am/pm”.

             Adult’s Dashboard Comment:

             Student’s Screen:

The last option on the Modules page is for admins to decide if they want to allow students to see the consequence ladder on their device.  If they do wish for this to be seen, they need to check the box “Yes.”

Return to Modules

Return to Table of Contents

Visitor Management Module

Once in your Pass system, you will need to make sure that your Visitor Module is activated.  To do so, under the Control Panel, click Modules.  On that page, scroll down to Visitor Module and slide the toggle to the right.    

Return to Modules

Return to Table of Contents

Front Desk Users - Visitor Adults

When activated, you can then choose which adults will have access to Visitor Management in your school.  Choosing the first option will allow all adults access to Visitor Management.  Choosing the second option will allow you to select which adults in your Pass system will have access to Visitor Management.  

If you choose the second option, click Add Adults from the Modules page or click Visitor Settings on the Control Panel and click Visitor Adults.

On the Visitor Adults page, click the blue + Assign (Add Staff) button in the top right corner.  A white popup window will appear.

You have two options to assign adults who can check in visitors.

  1. Check the “Select adults” box and then select adults by typing their name in the “Adult visitor front desk staff” box or clicking in the box and clicking on the names of the individuals who should be allowed to check-in visitors.  When finished selecting these adults, click the blue Allow button.  (If you added a person by mistake and need to delete that person from the list, click on the blue trash can to the right of their name.)

  1. Check the “Upload file” box, click Download Example file to see how the CSV file should be formatted, create your file, save it, click “Select a file to upload” and choose the correct file, and then Allow.

Your Visitor Adults will appear on the table. If you need to remove someone from the list, simply click on the three (3) dots to the right of that person’s name, click Delete, and then click the red Confirm button. That person will be removed from the list of Visitor Adults.

REMEMBER:  

You can amend the list of Visitor Adults at any time.

Return to Modules

Return to Table of Contents

Queue Management Module

Queue Management allows an automatic queue to form when certain locations reach their maximum capacity. For these locations, once the capacity is reached, subsequent students attempting to create passes there will be added to the line. Students will receive real-time updates on their queue position and the student and teacher will both be notified when it's their turn.

To enable the Queue, in the Control Panel, click Modules, scroll to Queue Management, and  slide the toggle on the right side of the screen to the right.

Once enabled, you will see Queue Settings under the Control Panel. Click on Queue Settings to manage your Queue.

ADDITIONAL INFO:

For the daily functionality of Queue Management, please reference the Pass Teacher/Staff Guide.

Return to Modules

Return to Table of Contents

Behavior Management Module

Behavior Management enables students to earn points for demonstrating positive behavior. Adults have the ability to award and redeem these points, while students can track what they have accumulated and spent. Additionally, point categories can be fully customized, including automated rewards for students who arrive to school and class on time.

To enable Behavior Management, in the Admin Control Panel, click Modules and switch to Behavior Management and slide the toggle to the right.

Once enabled, you will see Behavior Management on the left menu, and

Behavior Management Settings under the Admin Control Panel.

Behavior Management Settings (under Queue Settings)

        Core Value

        Positive Behaviors

        Automated Points

        Customized Theme

        Redeeming Points

Once enabled from the Modules page, Behavior Management can be customized to fit your school and needs.

Core Value

Core Values are the categories used to organize Behavior Management points. You will need at least one Core Value enabled in order to utilize Behavior Management. When adults are awarding student points, they will see these values in the drop-down menu.

There are pre-filled core values that can be used or edited. To customize the Core Values, click in the Action column on the table. You can Delete, temporarily Disable, or Edit the value. In the edit box, you can rename the value, add a description, choose a color association, and enable or disable the value. Once the changes are made, click Submit to save.

Core Values can be added by clicking the “Add Core Value” badge and filling out the required information. Core Values can be added by clicking the “Add Positive Behavior” badge and filling out the required information. Behaviors can also be added via CSV file, see the Creating a Behavior Management CSV section for details.

Positive Behaviors

Students earn points for demonstrating specific actions called Positive Behaviors. Each of these behaviors is linked to a corresponding Core Value and color-coded for consistency. Adults will select the specific Positive Behavior from a drop-down menu when awarding points.

There are some Positive Behaviors already created, you can review and edit them as needed. To customize the Behaviors, click in the Action column on the table. You can Delete, temporarily Disable, or Edit the value. In the edit box, you can select the associated Core Value, rename the behavior, set the number of points awarded, and add a description. Once the changes are made, click Submit to save.

Positive Behaviors can be added by clicking the “Add Positive Behavior” badge and filling out the required information. Behaviors can also be added via CSV file, see the Creating a Behavior Management CSV section for details.

Creating a Behavior Management CSV

Behaviors can also be added via CSV file. Click the Upload CSV badge and download the sample file. Add the requested data, ensuring that the headers match the sample file exactly. The file columns are: Core Value, Positive Behavior, Award Description, Color, Points, and Status. Once the file is created, upload it in the Upload CSV pop-up.

Assign a color by adding the first letter of the color as listed on the key:

  1. Water (W)
  2. Periwinkle (P)
  3. Teal (T)
  4. Raspberry (R)
  5. Orange (O)
  6. Green (G)
  7. Leaf (L)
  8. Strawberry (S)
  9. Cloud (C)

To associate multiple Positive Behaviors with a Core Value, simply repeat the Core Value on multiple rows.

As you change and update your settings, keep in mind that each new CSV will overwrite the last. To add a new behavior or value, add it to the bottom of your current file and reupload. Do not upload a file with only the new data as this will cause existing settings to be removed.

*Please note, if you choose to customize your theme, the CSV upload headings will not reflect customizations.

Automated Points

Automated Points works together with Tardy Management to let the system do the work for you. This can be used in connection with Late to School (LTS), Late the Class (LTC), or both. Students will be awarded points when they have no LTS or LTC passes in the selected timeframe.

Switch on the toggle for one or both tardy options. Then, select the frequency (daily, weekly, or monthly), the associated Core Value, and the number of points to be awarded. Click Save to apply the changes.

Customized Theme

If your school uses different terms or verbiage, the Customized Theme allows you to customize Behavior Management. On this tab, you can rename the Behavior Management module, Core Value, Positive Behaviors, and Points. To make these changes, slide the toggle, type in the boxes (25 character limit), and click Save.

Redeeming Points

Adult users can use the Behavior Management tab to award, correct, or redeem student points. This process is outlined in the Pass Teacher/Staff Guide. For a smooth experience, be sure to communicate to your staff expectations for point redemption.

Auto Check-In Module

If your school is interested in using the Auto Check-In PIN feature in Pass, please click the switch to the “On” position shown below.  This will enable admins, staff, and teachers access to set a public PIN in their profile for any location to which they are associated.  Students can then enter this public PIN on their pass upon entering that particular location.  This is the only step a Pass Admin needs to take in order to set up and enable this functionality in the system.  

Return to Modules

Return to Table of Contents

Kiosk Module

Enabling the Kiosk module will allow students to create passes from a single device in situations where they might not have access to their own device.

To activate the Kiosk functionality in your school, slide the Kiosk toggle to the right, and your Kiosk options will be displayed.

#1         Toggle Kiosk Mode “On” or “Off”.

Check the appropriate boxes

#2          Set Kiosk Passcode to be Student Number - Automatically assigns the Student ID Number in Pass as

                 the student’s passcode.

#3        Block students from setting and changing their own passcodes - Prevents students from accessing and

                 editing their own passcode.

#4        Student Input Methods - Check the box to choose your default kiosk input method. All options will be

                 available to students when creating passes using a kiosk. 

#5        Disable the ability to direct launch a kiosk - Removes the “Launch” button from the

                 adults’ Kiosk screens.  

#6        Default Domain for Kiosk - If you have multiple email domains, choose the student

domain as your default for Kiosks.

Student Passcode Options:

  1. Student Passcode Management
  2. CSV File Import of Student Passcodes
  3. Barcode or Magnetic Strip Scanning
  4. Student ID Number as Kiosk Passcode

Student Passcode Management:  Allow students to designate their Kiosk passcode by entering their own Kiosk passcode in their Pass profile, shown below. The student is solely responsible for managing this passcode, although an Admin can reset the passcode.  This will be the setting unless a checkmark is entered in the “Block Students from Setting and Changing Their Own Passcodes” on the Modules → Kiosk setting screen.

To reset a student’s Kiosk passcode, go to Users → Main Users → search for the student → click Edit → enter the new passcode in the “Kiosk Passcode” field → click Update.

CSV File Import of Student Passcodes:  Assign students their Kiosk passcode by importing a CSV file in the Pass Users interface. Click on the Import Kiosk Passcode button on the Main Users screen.

REMEMBER:  

If the Import Kiosk Passcode button is missing on the Main Users page, click Modules, scroll down to Kiosk,  and de-select Set Kiosk Passcode to be Student Number.

To track the status of the Kiosk Passcode CSV file, click Users → Main Users.  On this page, under the Import Users box, click Kiosk PC.  The file name and status will be displayed on the screen.  

   

Barcode or Magnetic Strip Scanning:  There is a third option to select either barcode (Barcode As Default Login) or magnetic strip scanning (Card As Default Login).  

Student ID Number as Kiosk Passcode:  A fourth option would be to allow a student’s ID number to serve as the student’s Kiosk Passcode. Click on the “Set Kiosk Passcode to be Student Number” under the Kiosk Module.

Other factors to consider include:

REMEMBER:  

Kiosk Passcodes are case-sensitive.  If your student ID makes use of capital letters (ST-48319, for example) and you are using student ID numbers as the students’ Kiosk passcodes, your students will need to utilize capital letters when entering their Kiosk passcodes.

VIDEO ALERT:  

Please watch the “Kiosk - Admin Setup Instructions” video found on the Pass Training Video Index (Admins).

Quick Tip:  

Additional Kiosk information can also be found in the Pass Teacher/Staff Guide.

Return to Modules

Return to User Management

Return to Table of Contents

Digital ID Cards

Your school now has access to digital student ID cards.  These ID cards are created for all students and have the following information on each card:

The student’s information (along with the barcode/QR Code/NSPH, if selected) will be displayed on the student’s screen when the student selects “Digital ID” on their device.

No choices selected

QR Code as Default with NSPH selected

Barcode as Default with NSPH selected

Return to Modules

Return to Table of Contents

Printing Digital ID Cards

You can print your students’ ID cards from your Pass system.

Under the Control Panel, click Users and then Main Users.  On the next screen, click Print Student Digital IDs.  

 

A popup will appear alerting you that your Digital Student ID cards are being prepared.  Click Okay.  When the file is ready for download, you can find it on your Dashboard.

Go to your Dashboard.  When the file is ready to be downloaded, you will see the following message toward the top of your screen.  Click Download.  (The download will be available for 90 minutes.  If you don’t click Download in the 90-minute window, you will need to repeat the aforementioned steps.)

Once downloaded, you can print your students’ digital ID cards.

Return to Modules

Return to Table of Contents

Retain Extra Passes

When enabled, this functionality allows schools to retain the Appointment passes and Appointment requests that do not become passes and therefore would normally not be available in history.  

Some states require Admins to be able to see any communication between a student and adult, and these types of passes do allow students and adults to make comments to one another.  

All regular passes that could also have communication on them are available in History.

Return to Modules

Return to Table of Contents

File Uploads

The File Uploads screen allows an Admin to view “User” files that have been uploaded to their Pass system. These files could be sent by the school via SFTP or uploaded directly through the system interface from the User Management →Main Users screen and Import Users option.

In both instances, the file is stored on the Pass SFTP server and the details are displayed on the File Uploads screen for system administrators to view. When files are uploaded they will not be processed instantaneously but put in a queue for processing. It will take 24-48 hours for the data in processed files to be fully integrated into Pass.

IMPORTANT NOTE:  

It will take 24-48 hours for the data in processed files to be fully integrated into your Pass system.

Once a file has been uploaded, it will go through the following statuses until it processes successfully or fails.

Return to File Uploads

Return to Table of Contents

Retained

When enabled (Retain Extra Passes - Modules), this feature allows schools to retain the Appointment Passes and Appointment Requests that do not become passes and therefore would normally not be available in History. (Some states require admins the ability to see any communication between a student and an adult, and these types of passes do not allow students and adults to make comments to one another.)

To see this particular data, under the Control Panel, click Retained (1).  On the Retained page, select the parameters for your search - Types (2), School Year(3), and Date Range (4).  When ready, click Submit (5).  Your results will be displayed on the table below.

REMEMBER:

  • All regular passes that also could have communication on them are available in History.
  • You can download this data as needed.

Return to Table of Contents

Help Desk

As you have questions about your Pass system that are not answered in our documentation/tutorial videos under the Training tab, please use this link or the one found on our Help Desk page to create a help desk ticket.

You can also access and subscribe to our status page - Securly System Status -  to get updates if we are experiencing any kind of system outage or loss of key/essential functionality.

Return to Help Desk

Return to Table of Contents

Miscellaneous

Technical Information

          Technical Coordination

          Pass System Status Page

          Web Accessibility Features

          Pass Help Desk Information

          Pass Improvement / New Feature Requests

          Staying Logged in to your Pass System

          Student - “You are Locked” Message

Technical Coordination

If this has not already been addressed, please coordinate with your technical department to have the following items completed.  

  1. For transferring any data files to us, please use the following host:

sftpgw.eduspiresolutions.org (connect via port 22 using SFTP)

  1. Please allowlist all emails from the following domains so you can receive application notifications from our systems.
  1. If your organization typically allowlists specific domains, or if any of your users are having difficulty accessing our application from inside your network, please allowlist the domains listed below:
  1. Please allowlist our server as noted below and prioritize for access through any firewall or network security options you have in place, if accessing our applications via URL name is not sufficient:

Application

Host / IP Addresses

SFTP (all applications) - port 22

sftpgw.eduspiresolutions.org

SFTP IPs

3.84.138.115

3.215.108.42

NAT Gateway (all applications) - port 443

23.22.236.58

3.223.48.151

WAF (external firewall)

156.154.120.170

Return to Technical Information

Return to Table of Contents

Pass System Status Page

The following link provides access to the Pass system status page.  This page (along with our Help Desk Portal) will be updated with major disruptive system events, such as system outages or loss of key functionality. 

Pass System Status Page

Return to Technical Information

Return to Table of Contents

Web Accessibility Features

Securly has made Pass fully accessible under various ADA requirements via the web browser. The current set of accessibility requirements that are most widely used are called “WCAG 2.1”, which provides various accessibility options for changing the size, colors, font, using screen readers, etc. The icon displayed below is available on the Pass screen for ALL users.  This is located in the bottom right corner of the screen.  If settings are enabled, they remain available until the user clears their cache for their browser.  If/when this is done, the accessibility features will need to be reselected.

 

VIDEO ALERT:  

Please watch the “Web Accessibility Features” video found on the Pass Training Video Index (Admins)

Please know that the Accessibility Widget can impact the functionality of Pass.  By choosing the “Reset Settings” button within the widget, you will clear any previously set features and be able to troubleshoot if the widget is causing a negative impact on your use of Pass.  If you wish to remove the widget, choose the “Hide Interface” button within the widget.  This will allow you to tab through Pass without turning on accessibility features.  If you would like to bring it back, you would need to clear the cookies from your browser.

Return to Technical Information

Return to Table of Contents

Pass Help Desk Information

The Pass Help Desk portal is designed to provide Pass Admins with a way to submit various types of support requests and questions to our team.  Once a school has implemented Pass and the Project Manager closes the “Implementation” ticket, all requests for support should be entered into the Pass Help Desk portal.  This should be done by someone with “Admin” role access at the school.  The Pass Help Desk link and information should not be shared with Teachers, Staff, or Students.  Below are links to Pass Help Desk information.  These can also be found by Admins in Pass under the “Help Desk Portal” menu.

Return to Technical Information

Return to Table of Contents

Pass Improvement/New Feature Requests

We value your feedback and suggestions on how to improve the Pass system.  As you become more familiar with Pass and think of ways to make the functionality even better or maybe even want to see a feature added to the system, there is an easy way to share that request with us.  Follow the steps below to submit an enhancement ticket.

  1. Go to Support.securly.com
  2. Click Submit a support ticket

  1. Under Submit a request, select Pass Support
  2. Enter the following information
  1. Email address
  2. Subject of request
  3. Detailed description of the enhancement
  4. Choose a Pass Request Category
  1. Suggest a new Feature or Improvement
  2. Enter your School Name
  3. Enter your District Name
  1. Click SUBMIT

Return to Technical Information

Return to Table of Contents

Staying Logged in to your Pass System

The length of time that you remain logged into your Pass system depends on the method that was used to log in.

Web Browser - If you used a web browser to log in, you will remain logged in until midnight in your time zone, when the system will automatically log you out.  If you do not log out of the system at the end of your workday, the next day it may appear that you are still logged in; but once you try to interact with the program, you will be redirected to the log-in page.

Kiosk - Once generated, your Kiosk will remain active for at least 10 days as long as the computer isn’t turned off or the browser isn’t closed.  If the computer is turned off or the browser is closed, you will need to log back into your Pass system and launch your Kiosk again (or if using the K-login method, re-enter the code).

Mobile App - Once you’ve downloaded the app and logged in, you will remain logged in until you log out of the app or remove the app from your device. Depending on your settings, you may need to log back in after an App version update.

Return to Technical Information

Return to Table of Contents

Student - “You are Locked” Message

This message and screen will appear to a student who has attempted multiple times (5) to enter an adult’s PIN to approve a pass.  After the fifth attempt, the student will be logged out of the system.

At this point, you can enter any valid adult PIN (set in each user's Profile Settings) to unlock the device.  If the student logs back in and continues to enter an incorrect PIN, after the 10th attempt, the student will be logged out again, and the admin will get a banner message.  

The student will be locked out of his account for four (4) hours.  The message will stay on the admin’s dashboard until the admin clicks on the “X” to close it.  Closing the message will not affect the four-hour lock.

Return to Technical Information

Return to Table of Contents

Training Resources

Implementation Training Checklists

Training - Adults / Students

          Teacher / Staff Training

          Student Training

Pass Training Video Index - Admins

Unique Uses of Pass

Implementation Training Checklists

The documents listed below coincide with the Admin Training and Teacher Training webinars for schools that are setting up Pass for the first time.  Please feel free to share these links with the appropriate users in your school.

Return to Training Resources

Return to Table of Contents

Training - Adults / Students

Below are some tips and resources available to help with your Pass training plan.  These recommendations are geared toward clients doing a “Self Serve” implementation.  (“Streamlined” implementation clients have access to group training webinars and should have received documentation and registration links for this training.)  

There are many training resources available directly in the Pass system, which are customized for each user role.  The training resources available in Pass are the most recent, updated versions.  (Anything marked with an asterisk below is available directly in Pass from the “Training” menu.)

  1. Teacher/Staff Training
  1. Resources
  1. Pass Teacher/Staff Guide*
  2. Teacher/Staff Training Videos*
  3. Guides or Videos created internally by school
  4. Live Pass Training Webinars
  1. Multiple days/times available
  2. Easy registration process
  1. Confirmation email sent to participants
  2. Easy cancellation process from the Confirmation email, if cancellation is necessary
  1. Planning Tips
  1. Identify the best time, place, and method for introducing Pass to teachers and staff.
  2. Consider asking teachers/staff to watch the Overview of Pass (for Teachers/Staff/Admin) video prior to the training session.
  3. Another option to consider having your teachers and staff watch the videos on the Teacher/Staff Pass Online Training document and then hold a Q & A session at a staff meeting.
  4. Show teachers/staff where the training guide and videos are located in Pass so they can use these tools later if needed.  (These can be found in the “Training” menu within Pass.)
  5. Share any internal policies and procedures with teachers/staff that they will need to know.
  6. Inform teachers/staff of their responsibilities for introducing Pass to the students and explain the details of that plan.
  7. Make sure everyone understands the timeline and rollout schedule, including your PM.
  1. Tips for Conducting In-person Teacher/Staff Training
  1. If someone is planning to demonstrate the system “live” to this group, make sure the necessary sample users exist in the system and confirm the login credentials.
  1. It is usually nice to have at least 1 teacher, 1 staff and 2 students as sample users to utilize during a training session.  
  2. Point out the red bubble on the student device and blue bubble on the teacher’s dashboard that shows how many passes the student has already done today.  Very helpful feature!
  1. Prepare and practice ahead of time what types of passes should be shown as examples during this training session:
  1. Roundtrip - This type of pass does not have another adult approving or entering a PIN at the destination.  Instead, the student goes to the destination and returns to the same teacher/location.  The system expects the same person to approve the pass upon leaving and returning.  Examples usually include: Bathroom, Locker, Water Fountain
  1. First pass - Show the teacher entering PIN on student device to approve the pass.
  2. Second pass - Show the teacher approving the pass from the dashboard.
  1. Layover - This pass is similar to a layover at an airport.  The layover may be a quick connection, or they may need to wait a few minutes before returning, or they may not return at all.  An example might be the Media Center or the Main Office. A student goes to a destination, like the Media Center, and may check in and out quickly if the Librarian has their reserved book ready, or the student may be checked in at that location and then need to wait for the Librarian to process the book before leaving and returning to the place of origin.
  2. Show options for destination approvals & demonstrate as desired: Arrived, In/Out, End/Keep.
  1. Show entering comments on the pass.
  1. One Way - This pass is not as common as the two listed above, so you may or may not want to demonstrate this or cover it with your group.  It is where the student is leaving point A or Teacher A and going to point B and they will not return.  Some examples may be:  a pass when a student is leaving for early dismissal (when a school has that as a specific location) or to a testing room where the student could be there for a few hours.  The approvals or PINs on the pass are from different people.  
  1. Check with a Pass Admin to see if your school has any One Way destinations or pass types set up.  If so, you may want to include this as a sample during training.  
  1. Prepare for showing other Pass features and functionality that your school will use.  These may include:  Reviewing the menu options on the teacher dashboard, Auto Pass, Appointment Pass, Kiosk Mode, and various limits or settings that may be set or you plan to use, etc.
  2. If doing a “live” system training or demonstration with multiple users, log into a different browser for each user.  (Not just a different browser tab, but a completely different browser or incognito window.)
  3. Provide some time for teachers and staff to ‘practice’ or play around in the Pass system.

 

  1. Student Training
  1. Resources
  1. Pass Student Guide
  2. Training Videos 
  3. Guides or Videos created internally by school
  1. These may be helpful since internal policies and procedures can be incorporated.  
  1. Planning Tips
  1. Identify the best method for introducing Pass to the students.
  2. Prepare Teachers to introduce Pass to the students during a homeroom or study hall.
  1. Teachers could show the Overview of Pass for Students video to the class (or have them watch this on their own).  There is also a Student Pass Online Training document with recommended videos to use for training students.  
  1. Teachers should be prepared to help students log into Pass based on the school’s login method.
  1. Teachers could present and demonstrate Pass for the students, if desired.
  1. In this case, the teacher will need to walk them through logging into Pass and creating a pass.  The teacher can approve some passes from the Pass dashboard and some from the student devices.  
  2. If using Appointment Pass, review this feature with the students and remind them to look for upcoming Appointment Passes by clicking on the “Appointment Pass” menu option and reviewing the information.  (If Student Appointment Requests will be used, it would be good to introduce this to the students.)
  1. Teachers should show students where the training videos and QRC are located in Pass so they can use these tools later if needed.
  2. Teachers can review some of the school and classroom guidelines for using Pass during this time.  
  3. Allow for practice time between teacher and students during this session.
  1. Tips for Conducting In-person Student Training
  1. If necessary, provide sample users and Pass login credentials to anyone demonstrating multiple users and various functions, etc.
  2. If doing a “live” system training or demonstration with multiple users, log into a different browser for each user.  (Not just a different browser tab, but a completely different browser or incognito window.)

Return to Training Resources

Return to Table of Contents

Pass Training Video Index for Admins

The following document provides a list of all Pass training videos that are available to Admins and all other users.  This document is also available in the Pass “Training” menu under Documents and Video Tutorials.  

Return to Training Resources

Return to Table of Contents

Unique Uses of Pass

The document linked below outlines several unique workflows to assist admins with student movement in their building.

Return to Training Resources

Return to Table of Contents

Additional Information

View Profile Settings of Users

Banner Notifications

Out of Office

Student Appointment Requests

          Important sAPT Information - Admins

          Setting Locations for sAPT Requests

          Important sAPT Information - Students

          Student Appointment Passes on the Dashboard

Spanish Translation Option - Students

Pass Mobile App Information

View Profile Settings of Users

Admins can view (Read Only) a user’s Profile Settings from the Main Users screen. This view includes the following information:

To view a user’s settings, click Users, click Main Users, search for the specific user, and click the three (3) dots to the left of the user’s name under the Action column. Click View to see that user’s Profile Settings.  (Reminder: The information displayed is Read Only. You cannot change any of this information on behalf of a user.)

Main Users Screen

My profile

My locations

Utilizing this Feature

If a teacher reports that passes are being approved with their name without their interaction, a student may have guessed their PIN. You can view the adult's PIN and, if necessary, direct that adult user to update their PIN in their Profile Settings. 

If a student or teacher reports that an adult cannot be found when creating a pass, they may have turned off the ability for passes to be created to/from them. You can view their answer to “Passes to/from you” to verify that it is toggled On. This can be changed in the adult user’s Profile.

If an adult user reports that their My Passes dashboard is showing other people’s passes, they may have associated themselves with an unnecessary location. You can view their location associations and recommend removing bathrooms, drinking fountains, and other locations.

Return to Additional Information

Return to Table of Contents

Banner Notifications

Admin users will be able to see notifications related to school-wide Pass Blocks, Out of Office instances, Consequence Ladder updates, and Student ID Cards.

To end an Out of Office instance early, click on the Out of Office tab on the left hand menu, click on the three (3) dots to the right of that instance, and click End OR click on the “X” to the right of the Out of Office instance on the Dashboard.

To download and print your Student ID Cards, click on the blue DOWNLOAD button and then click the print icon.

Return to Additional Information

Return to Table of Contents

Out of Office

The Out of Office feature in Pass provides any Admin, Teacher, or Staff user with the opportunity to indicate that they are not available for a designated period of time to approve passes in the system.  The system will notify and stop the student from creating a pass to the user that has set an out of office notification.  The user will indicate the date and designate the time period as shown below.

Admins can set their own Out of Office or they can set an Out of Office for another user.  Admins can also see all Out of Office notifications that have been set by Teachers and Staff.  The Out of Office menu can be accessed from the main menu on the left or from the blue “Create” button, as shown below.  

Click the blue + Out of Office button in the upper right corner, and then complete the form.  click Create before leaving the page.

User - Choose yourself (My leave) or any location with which you’ve associated yourself in your User Profile section.

Presets - 30-minute increments

Specific Date and Time of OOO

Repeat - Choose the repetition for this OOO instance (No Repetition, Daily, Weekly, Monthly)

A comment is NOT required but can be added if you wish to share why you are not available during this specific time.

Additionally, you can see your current and completed OOO instances.  If you need to do one of the following - find a specific OOO instance, download this list for future reference, or act on an OOO instance - use the “Search” option, click on the Download icon, or click on the vertical three (3) dots under the “Action” column. If editing an Out of Office instance, you will be able to modify the “End time” and “End on” date (if applicable).

A dashboard message will appear for the user when they have an active Out of Office.  This message indicates when the Out of Office will end.  There will also be a green “On” indicator on the left Out of Office menu.  There is an “X” that provides the user with an easy way to end the Out of Office without having to go back into the full menu.  Please see below.  

Below is the message that a student will receive when trying to create a pass TO an adult who has an active Out of Office.  

It is not recommended to set an Out of Office for Teachers who are out sick and a substitute is covering for them.  Students may still need to create passes to/from their “regular” teacher so the substitute can use their assigned PIN to approve the pass.  

VIDEO ALERT:

Please watch the “Creating an Out of Office" video located on the Pass Training Video Index (Admins).

Return to Additional Information

Return to Table of Contents

Student Appointment Pass “Requests” (sAPT)

There is an optional feature in Pass that schools can turn on to allow students to send Appointment Pass “Requests” to an Admin, Teacher, Staff member or a specific location.  Prior to enabling this, we strongly suggest that you communicate to your staff and students regarding this functionality, as it will impact many, if not all, of your users. 

VIDEO ALERT:  

Please see the “Student Appointment Request (Admins)” video on the Pass Training Video Index (Admins).

Return to Additional Information

Return to Table of Contents

Important sAPT Information - Admins

In order to activate the Student Appointment Pass (sAPT) module, go to the “Modules List” menu on the Control Panel to access the following screen and select all four options or any desired combination of the four.

When an Admin selects one or more of the options that specify to whom or what location students can request an appointment pass to, this is automatically updated/saved and will activate the student APT pass functionality.  

IMPORTANT NOTE:  

It is highly recommended to communicate with staff and students regarding these new features prior to activating.

 

When a Teacher, Admin, or Staff group is checked on the settings screen, as allowing student appointment pass requests, individual users will have the option to say “YES” or “NO” to allow student appointment pass requests to them individually.  Click Update after making a change to your Profile Settings.

When enabled, the question below will appear in the user’s Pass Profile Settings.  Even if the adult answers “Yes” in their profile (the switch toggled to the right), specific appointment requests can be “Denied” if it does not suit their schedule, etc.  

Return to Additional Information

Return to Table of Contents

Setting Locations for Student APT (sAPT) Pass Requests

When a school would like students to be able to make an APT pass request to a location, such as the Nurse, Main Office, etc., an Admin will need to check the box next to “Locations” on the Appointment Pass Settings screen, as shown below.  

It may be important to review the “Locations (rooms)” list after enabling sAPT Requests for Locations. Admins will be able to select “No” for any location to which they do not want students to make APT pass requests.  

Any and all users associated with an enabled location will be able to confirm sAPT requests.

Return to Additional Information

Return to Table of Contents

Important sAPT Information - Students

As soon as an Admin activates this module, students will see an additional option on their Create Pass screen:  “Appointment Pass - 5 Request(s) Available”.  Students will be allowed to create up to 5 appointment pass requests total (at one time).  If a request is pending/missed/confirmed, the student does not receive it back until the next day after the appointment.  If it is canceled by the student or teacher, the student receives it back immediately.

Student APT requests can only be made for up to 30 days in advance and must have a start time at least 30 minutes from when the pass is created.

VIDEO ALERT:  

Please watch the “Student Appointment Request Overview” video on the Pass Training Video Index (Admins).

 

To submit an APT request as a student, they must switch to the “Appointment Pass” section of their Create Pass screen - then indicate the “Departing From” and “Destination” information as shown below:

The student must then enter the desired Date, Period, Time (between 6AM-5PM), and a Reason for the pass.  The student then clicks Submit.  The message below will appear if the request was sent successfully:

The student can see their pass request(s) on the appropriate tab on the Appointment Pass menu, as shown below.  The student has the option to “Cancel” the appointment up until 30 minutes prior to the meeting time.  The adult to whom the request was sent must “Confirm” the sAPT in order for it to become a pass.

Return to Additional Information

Return to Table of Contents

Student Appointment Passes on the Dashboard

To help manage and “confirm” student appointment requests, there are two tabs that appear on the adult dashboard when a school has enabled sAPT functionality.  Below are explanations of each new option.  

        

Once a student request is “Confirmed” by the “To/Destination” party, the pass will be treated similar to other APT passes and will show as a “Today’s Appointment” if the request was for today.  See the example below:

                        

If a future sAPT request is confirmed, this will show as a tan “Future Appointment” on the appropriate tab of the main Appointment Pass menu, as shown below.

Student APT menu after a request has been confirmed:

If any of the adults involved in the sAPT request selects “Cancel”, there will be a notification on the student’s screen.  A number will appear by the bell in the top menu bar and when selected the student can view the details.  (Both cancellations and edits to any appointment passes will be listed here.)  The student can view the details of any changes to their appointment passes from the Appointment Pass menu as shown below.  

Return to Additional Information

Return to Table of Contents

Spanish Translation Option - Students

Students using the Pass system now have translation options -  English or Spanish.  When logging into Pass, English is the default language option.  If the Spanish translation is needed, students can easily click on the English button in the upper right corner and choose Spanish from the dropdown menu.  When chosen, it will become the default translation upon future logins.

Return to Additional Information

Return to Table of Contents

Pass Mobile App Information

There is a Pass mobile app that you can download, if desired.  To access the Pass mobile app, go to the app store for your mobile device and download the app.

App Store

Google Play

Once you’ve downloaded the app, you can click on this link - Pass Mobile App Documentation - or access the document by clicking on the Training tab and then clicking on the Pass Mobile App link.

Potential Mobile App Issue for Adults - If a school has a large number of passes on the dashboard and there is a massive change event (i.e. -  many passes turn to long running passes (yellow flag), many passes end at the same time, and/or many passes move to “System Ended” passes (red flag)), then the App can crash.

Return to Additional Information

Return to Table of Contents

Expanded Table of Contents

GETTING STARTED

Logging In

Profile Settings

My Profile

My Locations

CONTROL PANEL SETTINGS

Reports

Summary Reports

        Now Reports

        Background Reports

Meet-up Report

Pass Totals

Tardy Settings

Visitor Settings

Queue Settings

        Auto Queue Clearing

        Enable Queue for Locations

                Set Queue Location Limits

Limits

        Limit Student Pass

Editing / Deleting Student Limits

Copying Inactive Limits to Upcoming School Year

Limit Location Max Cap

Limit Active Pass

Limit Location Availability

        Copying Inactive Location Availability Limits to Upcoming School Year

Contact Control (A/B Polarity)

Pass Blocking

Users (User Management)

        Main Users

                    User Table

Substitute Users

                          Substitutes Interacting with Student Passes

                          Directions for Substitutes

Archived Users

        Rostering and Managing Users

        Understanding Roles

Rostering Users

                                  Securly Sync

                                  Third-Party Providers (ClassLink, Clever, etc.)

                                            Additional Third-party Provider Notes

                          User CSV File

                                    Creating a CSV User File

                                              Best Practices 

                                    Uploading a CSV User File

                          Manual (Individual) Users

                                    Password Guidelines

                                    Steps for Adding a Manual (Individual) User

Maintaining Users (Editing or Archiving)

                                  Editing a User

                                          Archiving (Removing) Users

                                                    Auto-archiving Users

                                                    Manually Archive Users

System Settings

Auto Pass

Pass Times

Periods

Locations (rooms)

Manage “Favorite Locations and People”

Manage Order

Pass Transparency

Modules

        Appointment Pass Module

        Email Notifications

        Options

        Student Appointment Requests

Tardy Management Module

        Capturing Tardy Infractions

                CSV Uploads

                Teacher Pass

                Kiosk

                Student Late Pass (SLP)

Visitor Management Module

        Front Desk Users - Visitor Adults

Auto Check-in Module

Kiosk Module

Digital ID Card

        Printing ID Cards

Retain Extra Passes

File Uploads

Retained

Help Desk

MISCELLANEOUS

Technical Info

Technical Coordination

                 Pass System Status Page

                 Web Accessibility Features

                 Pass Help Desk Information

           Pass Improvement / New Feature Requests

           Staying Logged in to your Pass System

           Student - “You are Locked” Message

Training Resources

Implementation Training Checklists

Training - Adults / Students

                          Teacher / Staff Training

                          Student Training

Pass Training Video Index - Admins

Unique Uses of Pass

Additional Information

        View Profile Settings of Users

            Banner Notifications

Out of Office

Student Appointment Requests

                          Important sAPT Information - Admins

                          Setting Locations for sAPT Requests

                          Important sAPT Information - Students

                          Student Appointment Passes on the Dashboard

Spanish Translation Option - Students

Pass Mobile App Information

Return to Table of Contents

Updated: 7/13/26