Modern conveyor systems
- The modern conveyor system includes four common models: belt conveyor, roller conveyor, inclined conveyor, and 90/180 swerve conveyor
In the setting parameters of the conveyor blueprint, there are two types of machines preset: belt conveyor/roller conveyor, which you can choose from
The angle option in the swerve conveyor blueprint is preset at 90/180 degrees and mirrored for you to choose from
- You can customize the length and height, and modify the limit values to meet the requirements. It is not recommended to modify the width values that come with them
If you want to modify the limit values for length and height, please open the selected conveyor blueprint and select length or height to modify the limit values in the details panel. Of course, it is not recommended to modify the width value, which will affect the width of the swerve conveyor and cannot match
- Can simulate the flow of objects on a conveyor (non physical)
The prerequisite is to place the BP_Generator blueprint on the conveyor belt or roller (it must be inside the detection box, otherwise the generated object will not be detected or moved), and set the rotation of the generated blueprint to be consistent with the conveyor's conveying direction (green arrow)
When an object moves outside the conveyor (detection box), it will not move and will continue to accumulate there. If this is the desired result, no modifications are needed. If you want it to disappear, you can add a BP_KillActor at the end of the conveyor to destroy it
BP_KillActor has preset the type of kill, you can add any type you want to kill, as long as the object touches the detection box, it will be directly killed
