JazzGroove.org

Premium Channels Setup guide for Bryston BDP devices

2021-07-10

1. Sign in to Jazzgroove.org
2. Click “Account” at top of web page.
3. Under My Account, click “Audio Settings” tab.
4. Enable “Audiophile Fidelity”.
5. Select Audio Quality: FLAC
6. Select Channel (Mix1, Mix2, Dreams, Gems or Smooth).
7. Select Format: PLS
8. Do not check box for Expanded URL.
9. Copy URL from oval window at the bottom of the Audio Settings page.
10. In Bryston BDP Dashboard webpage, select “bRadio”.

11.  In the BRadio page, paste the URL copied from JazzGroove.org into the blank white field.
    
    The URL window is too small to display the entire URL.  You can move the cursor to scroll through the window to confirm you’ve copied the entire URL correctly.
12. An error message might pop up as shown below.  If so, ignore and continue.  Click “Play” to the right of the URL window.
     
13. After several seconds, a banner will appear, and the play time index will begin to advance, indicating streaming has started.

14. If streaming does not work, press the square “Stop” control button, manually select and delete the contents of the URL window, then repeat steps 5 to 9, and 11 to 12.
15. Optional tip (all remaining steps):  
    Use Media Player to create a separate Playlist for each Jazzgroove Channel.  You can load the desired individual Channel playlists (Mix1, Mix2, Dreams, Gems, Smooth) into the Media player “Now Playing” queue.  This makes it easy to switch between Channels.
16. While the Channel is streaming (or optionally press the square “Stop” control button), select Media Player.
     
17. In Media Player, the streaming Channel will appear in the “Now Playing” queue window on the left.  Click “Save”.
    
18. Type a playlist name and click “Save”.
    
19. Click “Clear” to clear the saved Channel from the “Now Playing” queue.
    
20. Repeat steps 6-19 to save playlists for additional Jazzgroove Channels.
21. Click “Playlists” to add the Channels you’ve saved to the “Now Playing” queue.
    
22. Click the “+” to add the desired Channels to the “Now Playing” queue.  The titles will appear as codes until they are played.
    
23. Use the “>>” and “<<” control buttons to switch between Channels in the “Now Playing” queue.