WINTERIZE

(parts # to begin with RMW)

• Brass 3-way Ball Valve (lead-free)
• Fittings (½” pipe thread x Pex)
• Pex Tubing

                   Connect to water lines:

1. To the fresh water tank.

2. To antifreeze jug/tank.

3. To the pump.

WATER HEATER BYPASS

(parts # to begin with RMV)

• Brass 3-way Ball Valve (lead-free)
• Check Valve (Brass or plastic options)

Connect to water lines:  

1. To water heater outlet.

2. To water heater inlet.

3. Cold water in.

* Install the check valve on the water heater at the hot water connection.

To Winterize

1. Make sure the pump is switched off.
2. Drain water tank and water heater. Allow tank and water heater to drain completely. (Note: make sure pressure relief valve is opened)
3. Open faucets to relieve pressure. (hot and cold faucets)
4. Close all faucets.
5. Turn Winterize Valve to “Winterize” and Bypass Valve to “Bypass”
6. Put hose into R.V. Antifreeze container. Use only non-toxic RV Antifreeze. (Antifreeze holding tanks available from Swan Industries) DO NOT use automotive antifreeze!!
7. Turn on pump switch.
8. Open hot water faucet located farthest from water pump. When red antifreeze appears let about a cup run down drain. (This will winterize drains). Do the same with all other water outlets. (hot and cold) including shower, toilet, etc.
9. Turn off the pump switch.
10. Open one water faucet to relieve pressure (hot and cold), then close it.

To De-Winterize

1. Close fresh water tank drain and fill water tank. (Leave hot water heater bypass in “Bypass” position).
2. Close hot water tank relief valve, and drain valve.
3. Turn Winterize Valve to “Normal Flow”.
4. Turn on pump switch.
5. Open cold water faucet farthest away from water tank until clear water appears. Shut off faucet. Do this to all other faucets, showers, toilets, etc.
6. Open hot water line until water appears.
7. Turn water heater bypass to “Normal Flow”. Your system is ready to use.

WARRANTY

1. One-Year Limited Warranty.
2. Labor, shipping, and handling costs are excluded.
3. The warranty covers only the original purchaser. The warranty is not transferable to subsequent owners.
4. Warranty becomes null and void if products have been repaired by an unauthorized person, modified, improperly operated, or abused.
5. Swan Industries, Inc. assumes no expressed or implied responsibility other than set forth above and will not accept responsibility for any other warranties issued and or implied.