INTRODUCTION
UPDATE
VMD HUD
CONCLUSION
CREDITS
CHANGE LOG
INTRODUCTION
VMD HUD Version: 7.5
The VMD HUD has many wonderful uses.
- Can send certain commands to all your Sorters on the same sim
- Opens the Redelivery page directly to VMD Items
- Can send certain commands to all your Vendors on the same sim
- Allows you to call Spenser the Sniper
And more!
New features get added so check back here often! The HUD is free so if you need one, go to the main VMD store and get one from the vendor.
UPDATE
- Get a redelivery from the vendor at the main store or from your current HUD.
- Wear the new HUD.
- Delete your old HUD.
VMD HUD
You can wear this HUD and send commands to all your Sorters, Vendors, etc., and perform other functions sim-wide as identified below.
Help = Puts very useful information (store location, VMD Website, and more) in local chat.
Mode = Allows you to select which system (DFS, TFF, G&S, Chimera, etc.) for the HUD at that moment. Selecting Mode also allows you to hear chat from the Selected Owner's items (see Pick Owner).
Redeliver = Takes you to the webpage to get items redelivered.
Sort = Sends a Sort command to all your sorters on the Sim.
Vendors = Takes you to the Vendor submenu where you have access to the following buttons:
- Change = Opens the list of Themes. If you select a theme you’ll be taken back to the first menu where you need to select “Local” or “Region” depending on where you want the newly selected theme to be applied.
- Done = Closes the menu and ends your current session
- Local = Sends the Auto (Texture > Auto) command to all your Vendors within about a 20 meter range of where you’re standing.
- Region = Sends the Auto (Texture > Auto) command to all your Vendors on the sim (does not affect Vendors owned by others).
Note: There must be an item inside the Vendor for the Auto function to automatically detect the item and apply the texture. If a crate is empty you’ll see a message in local chat telling you to have an item in the crate. For example, “[12:48] Bulk Water Barrel (x10): You must have at least 1 item in the vendor to use the auto feature”
Process = Sends the Process command to all your Sorters on the sim to correct texture issues.
Clean Up = Sends the Cleanup command to all your Sorters to ensure items didn’t get sorted to the wrong crates.
Recount = Sends the Recount command to all your Sorters on the sim.
Done = Closes the HUD’s menu.
Spenser = Takes you to the Spenser Menu (Note: Code Words stored in the HUD are per Mode (per system) so you can have a set for DFS, another set for Potted, etc.):
- Select Code = Presents a list of Code Words for the HUD’s current system and allows you to select one making it the active Code word.
- Add Code = Allows you to add your Spenser Code Words to the HUD for the HUD’s currently selected Mode (see the Spenser manual).
- Clear Code = Clears the currently selected HUD Code Word.
- Remove Cod = Presents a list of Code Words stored in the HUD for the selected mode and allows you to select one to delete from the list of Code Words.
- Sp Menu = Brings up the Spenser menu for the Spenser you have set as the Sniper for the current HUD’s Mode (system). Remember, only set one Spenser per system as the Sniper (see Spenser manual).
Snipe = Calls Spenser the Sniper to your location (you must have a Spenser setup as a Sniper. See the Spenser manual if you’re not sure how to do this.
Admin = Takes you to the Admin Menu
- Pick Owner = This option displays the owners who have you as an admin and allows you to select the name of the person who owns the items you wish to interface with. NOTE: Be sure to check the HUD Hover Text or the text in the popup so you know who the currently selected owner is before you start sending commands.
- Reload = Reloads the list of systems if it seems off.
- Reset WV = Sends the Reset WebView command to all your Sorters on the sim. This updates the WebView URLs and fixes most WebView issues.
- Auto Sit = A special command that might be implemented later for selected users.
CONCLUSION
Thank you for using a VM Designs product. We appreciate your business and your loyalty to our brand. We also value our customers, so if you have any problems or questions, your best source of help is:
Thank you again,
Vikk
Founder & Owner, V M Designs
CREDITS
Scripting - Vikktor Fairport (Vikktor.McDunnough)
Graphics & textures - Vikktor Fairport (Vikktor.McDunnough)
Documentation - Bobbie (WindRunner Shan)
And a special thank you to the beta testers, document reviewers, and other contributors to this project.
CHANGE LOG
- Revised the Mode option slightly.
- Mode selection now required for Spenser Sniper
- Rearranged some menus (Admin with items under it)
- Added the Reload button
- Expanded a bit to allow for the newer systems.
- Added additional Modes (systems)
- Added Code Word functions
- Added ability to call up a Sniper’s menu from the HUD.