Hello and welcome to Promise Road Elementary School!

How to Display a Device in the LGI

Step 1 - Locate the display on the Rack in the LGI Closet and tap the screen to open the first menu.

ENTER PASSWORD: 1234

You will hear the screen come down. (If it doesn’t, Go to Displays, Projector Screen “On”, Select Arrow for the screen to come down)

Step 2 - In this menu you will decide if you want to use the Wallplate to hardwire (located on the wall behind the rack on the LGI side) or Airplay (which is the Wireless selection). *Note the speaker is highlighted white under the Video Source Selection. This is a good option to check if you are not hearing sound. You can also use the up or down arrows located to the right of the Video Sources to adjust volume.

Step 5 - If you are hardwiring, plug the HDMI cable into the wall plate and Select <Wallplate> on the Screen.

Step 6 - Plug the other end of the HDMI cable into your computer (or dongle into the computer) and your device screen should appear on the display screen

Step 7 - If you are airplaying, make sure you have selected <Wireless> on the Display Screen. (Screen Mirror, Select pr_lgi_072430, enter AirPlay Code) (When Done, select pr_lgi_072430 to disconnect)

Step 8 - When you are finished, unplug your cable if you are hardwired. If you are Airplaying, just disconnect from the display in your Screen Mirroring Preferences.  Go to Projectors and Display and push the up arrow to put the screen back up.  Press Off, to turn the projector off.

Step 9 - If you need a microphone, they are located on the cart in the LGI closet beside the rack. Unplug the Microphone from the charger and turn it on and you will be able to use it for your presentation.

TIPS: If speakers are not working while you are hardwired, check in the Settings option on your device. Settings>Sound>Select speakers for the rack, (not LGI Airplay or MacBook Speakers). Only select the Airplay LGI Speakers when connected through Airplay.

Once you have gone through all of these steps and you now notice the video is playing too fast or the sound still isn’t working correctly, restart your device and when it comes back up, everything should be working correctly.