[MIF-6310] PiCAN2 - CAN Bus Board for Raspberry Pi 2 / 3 /3+

This PiCAN2 board provide CAN-Bus capability for the Raspberry Pi. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connections are made via DB9 or 3 way screw terminal.

Easy to install SocketCAN drivers. Programming can be done in C or Python.

FEATURES

• CAN v2.0B at 1 Mb/s

• High speed SPI Interface (10 MHz)

• Standard and extended data and remote frames

• CAN connection via standard 9-way sub-D connector or screw terminal

• Compatible with OBDII cable

• Solder bridge to set different configuration for DB9 connector

• 120Ω terminator ready

• Serial LCD ready

• LED indicator

• Foot print for two mini push buttons

• Four fixing holes, comply with Pi Hat standard

• SocketCAN driver, appears as can0 to application

• Interrupt RX on GPIO25

• Optional fixing screws

DEVELOPMENT RESOURCES

• Datasheet
• User Guide
• Software installation for Jessie 2016-05-10 Kernel 4.4
• Schematic Rev B
• Software installation
• Writing your own program in C
• Writing your own program in Python
• Python3 examples in Github
• Example use
• Example use 2
• Example use 3

DIMENSIONS

• Dimension(Product): 95.58 mm (W) x 76.54 mm (D) x 20 mm (H)
• Weight(Package)): 65 gram
• Dimension(Package): 130 mm (W) x 100 mm (D) x 40 mm (H)
• Weight(Package)): 121 gram

NOTES

• Raspberry Pi Board is not included

COMPATIBILITY

• Raspberry Pi 2 / Raspberry Pi 3 / Raspberry Pi 3+

SHIPPING LIST

1 x PiCAN 2 Board