Hexayurt - Feasibility + Sourcing doc version 1.0
Who?
- Daan is now stuck at awesome retro rainbow castle... untill the rain is done...
- <and here>
- <...>
What?
- making a hexayurt / cold room
- 1000 EUR budget? (confirm amount)
Where?
- Ohm2013 Camp
- Delivery Address for freight / drivers: “ “
When?
- Ideally, 26th or 27th July
- ~6pm hardware stores
- Final Deadline: before 30th July.
Why?
- Food Hacking FTW
- For make benefit hue-manatees
- Obligation to People Who Supported the Kickstarter!
How?
- Schematics / Drawings
- We need 6 roof panels which are equilateral roof panels {240 cm x 240cm x 240cm}. Cut and then join 6 rectangular PIR panels as follows:
- Guides / Assembly Instructions
Bill of Materials
(+ requirements) available on site, to buy
- PIR/polystyrene
- http://www.marktplaats.nl/a/doe-het-zelf-en-verbouw/isolatie-en-afdichting/m694293963-heel-goedkoope-prijzen-pir-isolatie.html?c=be2da871b0d84f75c3056cc6db858f31&previousPage=lr
- 9 E /m2 240x12 10cm Pir with Aluminium
- kerkhovensestraat 56 ( tomtom use 49, accros the street is 56)
- 013 5216036
- 06 15564595
- Mr. van Osch
- https://en.wikipedia.org/wiki/Polyisocyanurate
- 12 large tent pegs. You could use rebar, or I have also seen 17" bright orange plastic pegs which work very nicely.
- A heavy duty snap-blade craft knife to cut the panels, and one packet of extra blades. You should be able to extend the blade at least two inches. You may need 1 blade per panel (6).
- Two or three light duty knives for cutting tape when you are assembling the buildings.
- A 16'x20' tarp. It can be 14' x 16' (but 16'x20' is the closest standard size.)
- 100 feet of rope.
- A pair of gloves, safety goggles, and a dust mask or N95 mask.
- 12 x 6" long pieces of PVC pipe for the tape anchors. (cut to length)
- hack saw.
- Bubble wrap or foam pipe insulation to pad the ends of your tent pegs.
- Six rolls of 3" or wider foil tape?
- Mallet to drive the pegs.
- A 10 ft very straight 1"x4" or other device you can use as a ruler.
- (optional) Plastic sheeting for windows.
- Light Pipe with bottles of water + food dye for colours
+
- (optional) Furnace filters to tape over vents for dust-free ventilation.
- (optional) Something like a broom, or a squeegee on a long pole that will help your tape seal as you make the final seams on the roof cone
- silicone & purschuim ( buy at Action , not at buildingmarket, around 3 instead of 10 euro’s)
- 6 x PUR (expanding foam stuff)
- 1x Silicone around 20 euro’s
- (optional) If you choose the 2D/'Grounded' Assembly Strategy you may want something to use as a guide for making the gaps between panels.
- Air Conditioner
airco units second hand...
- send updates to kickstarter
- send updates to twitter
Construction Planning
Link Dump?
- http://www.appropedia.org/Hexayurt_playa_checklist
- http://hexayurt.com/
- http://www.appropedia.org/images/d/dc/All_hexayurts_web_dimensions.png
- http://www.appropedia.org/Category:Hexayurt_project
- https://ohm2013.org/wiki/Village:Food_Hacking_Base
- http://www.indiegogo.com/projects/food-hacking-base-at-ohm-2013
